Rhodium Indenyl NHC and Fluorenyl-Tethered NHC Half-Sandwich Complexes: Synthesis,Structures and Applications in the Catalytic C−H Borylation of Arenes and Alkanes

Indenyl (Ind) rhodium N-heterocyclic carbene (NHC) complexes [Rh(η⁵-Ind)(NHC)(L)] were synthesised for 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene (SIPr) with L=C₂H₄ ( 1 ), CO ( 2 a ) and cyclooctene (COE; 3 ), for 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene (SIMes) with L=CO ( 2 b ) and COE ( 4 ), and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) with L=CO ( 2 c ) and COE ( 5 ). Reaction of SIPr with [Rh(Cp*)(C₂H₄)₂] did not give the desired SIPr complex, thus demonstrating the “indenyl effect” in the synthesis of 1 . Oxidative addition of HSi(OEt)₃ to 3 proceeded under mild conditions to give the Rh silyl hydride complex [Rh(Ind){Si(OEt)₃}(H)(SIPr)] ( 6 ) with loss of COE. Tethered-fluorenyl NHC rhodium complexes [Rh{(η⁵-C₁₃H₈)C₂H₄N(C)C₂H_xNR}(L)] (x=4, R=Dipp, L=C₂H₄: 11 ; L=COE: 12 ; L=CO: 13 ; R=Mes, L=COE: 14 ; L=CO: 15 ; x=2, R=Me, L=COE: 16 ; L=CO: 17 ) were synthesised in low yields (5–31 %) in comparison to good yields for the monodentate complexes (49–79 %). Compounds 3 and 1 , which contain labile alkene ligands, were successful catalysts for the catalytic borylation of benzene with B₂pin₂ (Bpin=pinacolboronate, 97 and 93 % PhBpin respectively with 5 mol % catalyst, 24 h, 80 °C), with SIPr giving a more active catalyst than SIMes or IMes. Fluorenyl-tethered NHC complexes were much less active as borylation catalysts, and the carbonyl complexes were inactive. The borylation of toluene, biphenyl, anisole and diphenyl ether proceeded to give meta substitutions as the major product, with smaller amounts of para substitution and almost no ortho product. The borylation of octane and decane with B₂pin₂ at 120 and 140 °C, respectively, was monitored by ¹¹B NMR spectroscopy, which showed high conversions into octyl and decylBpin over 4–7 days, thus demonstrating catalysed sp³ C−H borylation with new piano stool rhodium indenyl complexes. Irradiation of the monodentate complexes with 400 or 420 nm light confirmed the ready dissociation of C₂H₄ and COE ligands, whereas CO complexes were inert. Evidence for C−H bond activation in the alkyl groups of the NHC ligands was obtained.     

Blue phosphorescence from mixed cyano-isocyanide cyclometalated iridium(III) complexes

The synthesis, structure, and photophysical and electrochemical properties of cyclometalated iridium complexes with ancillary cyano and isocyanide ligands are described. In the first synthetic step, cleavage of dichloro-bridged dimers [Ir(N=C)2(mu-Cl)]2 (N=C = 2-phenylpyridine, 2-(2-fluorophenyl)pyridine, and 2-(2,4-difluorophenyl)pyridine) by isocyanide ligands gave monomeric species of the types Ir(N=C)2(RNC)(Cl) (RNC = t-butyl isocyanide, 1,1,3,3-tetramethylbutyl isocyanide, 2-morpholinoethyl isocyanide, and 2,6-dimethylphenyl isocyanide). In turn, the chloride was replaced by cyanide giving Ir(N=C)2(RNC)(CN). The X-ray structures for two of the complexes show that the trans-pyridyl/cis-phenyl geometry of the parent dimer is preserved, with the ancillary ligands positioned trans to the cyclometalated phenyls. The cyano complexes all display strong blue photoluminescence in ambient, deoxygenated solutions with the first lambdamax ranging from 441 to 458 nm, quantum yields spanning 0.60 to 0.75, and luminescent lifetimes of 12.0-21.4 mus. A lack of solvatochromism and highly structured emission indicate that the lowest energy excited state is triplet ligand centered with some admixture of singlet metal-to-ligand charge-transfer character.     

Desymmetrisation of a centrosymmetric molecule by carbon-carbon bond formation: asymmetric aldol reactions of a centrosymmetric dialdehyde

The desymmetrisation of centrosymmetric molecules by enantioselective carbon-carbon bond formation has been reported for the first time. A bimetallic zinc catalyst developed by Trost was exploited in the desymmetrisation of a centrosymmetric dialdehyde. The approach was successful with a range of ketone nucleophiles and was uniformly highly diastereoselective (>98:<2). The yield and the enantioselectivity of the reaction varied as a function of the ketone used, and the desymmetrised products were obtained in up to 74 % yield and 97 % ee (ee=enantiomeric excess). The desymmetrisation of centrosymmetric molecules by enantioselective carbon-carbon bond formation is an efficient and convergent synthetic approach which is likely to find wide application in synthesis, particularly in the total synthesis of natural products with embedded centrosymmetric fragments.     

Vibrations of a chelated proton in a protonated tertiary diamine

Vibrational spectra of the conjugate acid of Me(2)NCH(2)CH(2)CH(2)CH(2)NMe(2) (N,N,N',N'-tetramethylputrescine) have been examined in the gaseous and crystalline phases using Infrared Multiple Photon Dissociation (IRMPD) spectroscopy, Inelastic Neutron Scattering (INS), and high pressure Raman spectroscopy. A band observed near 530 cm(-1) is assigned to the asymmetric stretch of the bridging proton between the two nitrogens, based on deuterium substitution and pressure dependence. The NN distance measured by X-ray crystallography gives a good match to DFT calculations, and the experimental band position agrees with the value predicted from theory using a 2-dimensional potential energy surface. The reduced dimensionality potential energy surface, which treats the ion as though it possesses a linear NHN geometry, shows low barriers to proton transit from one nitrogen to the other, with zero point levels close to the barrier tops. In contrast, two other related systems containing strong hydrogen bonds do not exhibit the same spectroscopic signature of a low barrier hydrogen bond (LBHB). On the one hand, the IRMPD spectra of the conjugate acid ions of the amino acid N,N,N',N'-tetramethylornithine (in which the two nitrogens have different basicities) show fewer bands and no comparable isotopic shifts in the low frequency domain. On the other hand, the IRMPD spectrum of the shorter homologue Me(2)NCH(2)CH(2)CH(2)NMe(2) (N,N,N',N'-tetramethyl-1,3-propanediamine), for which the NHN bond angle deviates substantially from linearity, displays more than one band in the 1100-1400 cm(-1) domain, which vanish as a consequence of deuteration.     

Transition metal alkylidene complexes. Pathways in their formation and tautomerization between bis-alkylidenes and alkyl alkylidynes

Studies from authors’ group (at the University of Tennessee) on alkylidene complexes and α-H migration in alkyl alkylidyne complexes, leading to unusual tautomerization equilibria between bis-alkylidenes and alkyl alkylidynes, are reviewed. Preparation of silyl alkylidene complexes (Me₃ECH₂)₂Ta(CHEMe₃)(SiR₃) [R₃ = (SiMe₃)₃, E = C, 3a, Si, 3b; R₃ = Bu^tPh₂, E = C, 4a, Si, 4b] and the pathway in the formation of 3b are discussed first. Pathways in the formation of archetypical Schrock-type alkyl alkylidenes (Me₃ECH₂)₃TaCHEMe₃ (E = C, 5a; Si, 5b), including the work using Ta(CD₂CMe₃)₅ (21-d₁₀) to confirm that it is the precursor to (Me₃CCD₂)₃TaCDCMe₃ (5a-d₇), are then considered. Tautomerization of silyl alkylidyne (Me₃CCH₂)₂W(CCMe₃)(SiBu^tPh₂) (6a) with bis-alkylidene (Me₃CCH₂)W(CHCMe₃)₂(SiBu^tPh₂) (6b) as well as (Me₃SiCH₂)₃W(CSiMe₃)(PR₃) [R₃ = Me₃, 7a; Me₂Ph, 8a; Me₂(CH₂)₂PMe₂ (DMPE-P), 9a] with (Me₃SiCH₂)₂W(CHSiMe₃)₂(PR₃) (R₃ = Me₃, 7b; Me₂Ph, 8b; DMPE-P, 9b) [P refers to a dangling P atom in Me₂P(CH₂)₂PMe₂] is covered next. Finally the conversion of the tungsten phosphine tautomerization mixtures to alkyl alkylidene alkylidyne (Me₃SiCH₂)W(CHSiMe₃)(CSiMe₃)(PR₃)₂ [(PR₃)₂ = (PMe₃)₂, 10; (PMe₂Ph)₂, 11; DMPE, 12], including its pathway, is presented.     

Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography

This Letter reports a technique of measuring polar surface energy distributions of lactose using inverse gas chromatography (IGC). The significance of this study is that the total surface energy distributions can now be characterized by combining the already known dispersive surface energy distribution with polar surface energy distribution determined in this study. The polar surface energy was calculated from the specific free energies for surface interactions with a monopolar basic probe, ethyl acetate, and a monopolar acidic probe, dichloromethane.     

Parylene insulated probes for scanning electrochemical-atomic force microscopy

Scanning electrochemical-atomic force microscopy (SECM-AFM) is a powerful technique that can be used to obtain in situ information related to electrochemical phenomena at interfaces. Fabrication of probes to perform SECM-AFM experiments remains a challenge. Herein, we describe a method for formation of microelectrodes at the tip of commercial conductive AFM probes and demonstrate application of these probes to SECM-AFM. Probes were first insulated with a thin parylene layer, followed by subsequent exposure of active electrodes at the probe tips by mechanical abrasion of the insulating layer. Characterization of probes was performed by electron microscopy and cyclic voltammetry. In situ measurement of localized electrochemical activity with parylene-coated probes was demonstrated through measurement of the diffusion of Ru(NH)(6)(3+) across a porous membrane.     

Studies of glutathione transferase P1-1 bound to a platinum(IV)-based anticancer compound reveal the molecular basis of its activation

Platinum-based cancer drugs, such as cisplatin, are highly effective chemotherapeutic agents used extensively for the treatment of solid tumors. However, their effectiveness is limited by drug resistance, which, in some cancers, has been associated with an overexpression of pi class glutathione S-transferase (GST P1-1), an important enzyme in the mercapturic acid detoxification pathway. Ethacraplatin (EA-CPT), a trans-Pt(IV) carboxylate complex containing ethacrynate ligands, was designed as a platinum cancer metallodrug that could also target cytosolic GST enzymes. We previously reported that EA-CPT was an excellent inhibitor of GST activity in live mammalian cells compared to either cisplatin or ethacrynic acid. In order to understand the nature of the drug-protein interactions between EA-CPT and GST P1-1, and to obtain mechanistic insights at a molecular level, structural and biochemical investigations were carried out, supported by molecular modeling analysis using quantum mechanical/molecular mechanical methods. The results suggest that EA-CPT preferentially docks at the dimer interface at GST P1-1 and subsequent interaction with the enzyme resulted in docking of the ethacrynate ligands at both active sites (in the H-sites), with the Pt moiety remaining bound at the dimer interface. The activation of the inhibitor by its target enzyme and covalent binding accounts for the strong and irreversible inhibition of enzymatic activity by the platinum complex.     

Pesticides as estrogen disruptors: QSAR for selective ERα and ERβ binding of pesticides

Evidence suggests that environmental exposure to estrogen-like compounds can cause adverse effects in humans and wildlife. The Endocrine Disruptor Screening and Testing Advisory Committee (EDSTAC) has advised screening of 87,000 compounds in the interest of human safety. This may best be accomplished by pre-screening using quantitative structure-activity relationship (QSAR) modelling. The present study aimed to develop in silico QSARs based on natural, semi-synthetic, synthetic, and phytoestrogens, to predict the potential estrogenic toxicity of pesticides. A diverse set of 170 compounds including steroidal-, synthetic- and phytoestrogens, as well as pesticides was used to construct the QSAR models using artificial neural networks (ANNs). Mean correlation coefficients between experimentally measured and predicted binding affinities were all greater than 0.7 and models had few false negative results, an important consideration for screening tools. This study demonstrated the utility of ANNs as QSAR models for pre-screening of potential endocrine disruptors.