Mode multiplexing in optical frequency mixers

Asymmetric Y junctions allow the development of a new class of optical frequency mixers that utilize higher-order waveguide modes for signal processing. We measure high-contrast (>30 dB) mode sorting in asymmetric Y junctions by use of a novel technique: efficient TM00, TM10, and TM20 mode mixing in a periodically poled lithium niobate waveguide. We also demonstrate an odd-to-even mode wavelength converter capable of spectral inversion without offset or bidirectional wavelength conversion.     

A Robust Point Spread Function Estimation for Out-of-Focus Blurred and Noisy Images Based on a Distribution of Gradient Vectors on the Polar Plane

The estimation of the point spread function (PSF) is a very important and indispensable task for practical image restoration. Various PSF estimation algorithms have been developed, especially for the out-of-focus blur. However, a majority of them are useless in an extremely noisy environment. This paper describes a new robust PSF estimation algorithm based on a distribution of gradient vectors on the logarithmic amplitude spectrum mapped to the polar plane. The proposed algorithm can estimate the out-of-focus PSF accurately and robustly, even for an image highly corrupted by noise. The effectiveness of the proposed algorithm is verified by applying it to the PSF estimation for out-of-focus blurred and noisy images.     

Superparamagnetic iron oxide-enhanced MR imaging for early and late radiation-induced hepatic injuries

Superparamagnetic iron oxide (SPIO)-enhanced MRI was performed in twenty-one patients undergoing proton-beam radiotherapy for hepatocellular carcinomas. Patients were divided into two groups: early and late phase hepatic injuries. Each group was investigated 3 to 9 weeks and 4 to 65 months after the start of irradiation, respectively. T(1)-weighted, T(2)-weighted, and T(2)*-weighted images were obtained before and after SPIO administration. In all postcontrast sequences in the early phase, irradiated livers demonstrated relatively higher intensity than nonirradiated livers and the radiation-to-liver contrast-to-noise ratio (C/N) was improved. Postcontrast T(2)*-weighted images showed the highest C/N. In the late phase, the irradiated areas showed high intensity on T(2)-weighted images and low intensity on T(1)-weighted images without SPIO, while high intensity on T(1)-weighted images with SPIO. The C/N increased with SPIO in all sequences and postcontrast T(2)-weighted images showed the highest C/N in the late phase. SPIO-enhanced MRI is useful to evaluate this entity both in the early and late phase of clinical studies.     

One-pot synthesis to engineer a Co-KIT-6 catalyst for the ring opening of methylcyclopentane

Co-KIT-6 mesoporous materials with Ia3d symmetry and Si/Co ratios of 50, 25, and 10 were prepared using hydrothermal one-pot synthesis. The Co-KIT-6 mesoporous materials were characterized by X-ray diffraction, N₂ adsorption–desorption isotherms, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, and X-ray photoelectron spectroscopy. The physicochemical characterization results show that all of the samples have well-ordered cubic mesostructures and that the structural integrity is preserved for n_Si/n_Co ratios as high as 10. It was found that most of the cobalt ions exist as isolated framework species, but for Co-KIT-6 with an n_Si/n_Co ratio of 10, the presence of extra-framework species/small cobalt oxide clusters cannot be excluded. The ability of these catalysts was tested by examining the conversion of the reaction of methylcyclopentane with hydrogen at atmospheric pressure and temperatures between 200 and 450 °C. The catalytic results show that their catalytic activity increases significantly with increasing cobalt content. The active sites, tetrahedrally coordinated Co and isolated atomic Co sites, were responsible for the endocyclic CC bond rupture between substituted secondary–tertiary carbon atoms, whereas the small clusters serve as active sites for the successive CC bond rupture. The ring-opening selectivity can be improved by increasing the density of isolated cobalt atom sites at low reaction temperatures.     

Ion-free latex films composed of fused polybutadiene and poly (vinyl pyrrolidone) particles as polymer electrolyte materials

Latex films composed of fused polybutadiene (PB) and poly (vinyl pyrrolidone) (PVP) particles that contain no ionic, hydroxyl, or amino groups were swelled with lithium salt solutions to yield new polymer electrolyte materials. The latex particle consists of a nonpolar, rubbery core that contains the PB component and a polar, glassy shell that contains the PVP component. The particle core-shell morphology was retained in the solid state, after the latex dispersion medium was removed and the films dried at high temperatures, due to the high T_g of the PVP shell. The films swelled when immersed in lithium salt solutions, and ionic conductivity of swollen films was greater than 10^-3 S/cm. Swelling and ionic conduction occurred only in the polar PVP component. Extraction of PVP occurred with extended swelling. © 1994 John Wiley & Sons, Inc.     

Synthesis of ion-free latex particles composed of polybutadiene and poly (vinyl pyrrolidone) as polymer electrolyte materials

The synthesis of polybutadiene (PB) by emulsion polymerization with use of poly (vinyl pyrrolidone) (PVP) stabilizer was investigated. The goal was to prepare flexible latex films that clearly retain particle morphology in the solid state after heat treatment and contain no ionic, hydroxyl, or (primary, secondary) amino groups. The latex particle core composed of PB was nonpolar and rubbery, while the particle shell composed of PVP was polar and glassy. Average particle diameter was measured by the dynamic light scattering technique, and particles were imaged by scanning and transmission electron microscopic analyses. Dialysis of the latices resulted in successful exchange of the dispersion medium without precipitation. © 1994 John Wiley & Sons, Inc.     

Ion-Free latex films as dual-phase electrolytes: Styrene–butadiene rubber and nitrile–butadiene rubber synthesized by emulsion polymerization with poly-(vinyl pyrrolidone) stabilizer

Ion-free latices of styrene-butadiene rubber (SBR) and nitrile-butadiene rubber (NBR) were synthesized by emulsion polymerization with use of poly (vinyl pyrrolidone) (PVP) stabilizer. The goal was to prepare ion-free latex films, possessing dual-phase latex particle morphology, and swell the films with liquid electrolyte to yield dual-phase polymer electrolytes (DPE). SBR/PVP latex was prepared readily, but NBR/PVP latex was sensitive to coagulation. Differential scanning calorimetric (DSC) and scanning electron microscopic (SEM) analyses of latex films provided morphological evidence concerning particle structure and phase separation. Blends of NBR/PVP and PB/PVP latices (PB = polybutadiene) were also investigated, but particle structure was not present in the blended latex film, even though particle structure was present in the individual NBR/PVP and PB/PVP latex films. After extensive swelling of SBR/PVP latex films, PVP was extracted from the films, and ionic conductivities greater than 10^?3 S/cm were achieved. © 1994-John Wiley & Sons, Inc.     

Evaluation of vermicompost as bioadsorbent substrate of Pb,Ni, V and Cr for waste waters remediation using Total Reflection X-ray Fluorescence

The use of vermicompost as adsorbent substrate for removing Pb, Ni, V and Cr from waste waters is proposed. In this work, after a preliminary physical and chemical characterization of the vermicompost, the optimal parameters for the heavy metal adsorption were obtained. A synthetic multielemental solution of Pb, Cr and Ni and a solution of NH₄VO₃ for vanadium were evaluated. The optimized parameters were pH, vermicompost mass to volume ratio, agitation time and particle size of the adsorbent. A batch system was employed for the assays. The elements were determined in the supernatant solution after filtration of the substrate. An optimal pH of 4.5 was found for ion removal. The agitation time slightly influences the adsorption of Pb and Cr, but it has a high influence on the Ni and V adsorption. The highest adsorption and removal of the metals was observed for a vermicompost mass of 2 g per 500 mL using a particle size between 75 to 841 µm for Pb, Cr and Ni, and 841 till 1192 µm for V. The mean removal percentage for each element is around 95% for Pb. Ni and Cr in the multielemental synthetic sample, demonstrating a high removal capacity of the substrate. For V it was found a removal efficiency of 50%.     

Auger Ionization Beats Photo‐Oxidation of Semiconductor Quantum Dots: Extended Stability of Single‐Molecule Photoluminescence

Despite the bright and tuneable photoluminescence (PL) of semiconductor quantum dots (QDs), the PL instability induced by Auger recombination and oxidation poses a major challenge in single‐molecule applications of QDs. The incomplete information about Auger recombination and oxidation is an obstacle in the resolution of this challenge. Here, we report for the first time that Auger‐ionized QDs beat self‐sensitized oxidation and the non‐digitized PL intensity loss. Although high‐intensity photoactivation insistently induces PL blinking, the transient escape of QDs into the ultrafast Auger recombination cycle prevents generation of singlet oxygen (¹O₂) and preserves the PL intensity. By the detection of the NIR phosphorescence of ¹O₂ and evaluation of the photostability of single QDs in aerobic, anaerobic, and ¹O₂ scavenger‐enriched environments, we disclose relations of Auger ionization and ¹O₂‐mediated oxidation to the PL stability of single QDs, which will be useful during the formulation of QD‐based single‐molecule imaging tools and single‐photon devices.     

High‐temperature ethylene/α‐olefin copolymerization with a zirconocene catalyst: Effects of the zirconocene ligand and polymerization conditions on copolymerization behavior

Copolymerizations of ethylene and α‐olefin with various zirconocene compounds at a high temperature were carried out to study the relationship between the ligand structure of zirconocene compounds and the copolymerization behavior. All of the indenyl‐based zirconocene compounds in combination with dimethylanilinium tetrakis(pentafluorophenyl)borate/triisobutylaluminum produced only low molecular weight copolymers at a high temperature, regardless of the substituents and bridged structures of the zirconocene compounds. However, zirconocene compounds with a fluorenyl ligand gave rise to a significant increase in the activity and molecular weight of the copolymers by the selection of a diphenylmethylene bridge structure even at a high temperature. Ethylene/1‐hexene copolymers obtained with the fluorenyl‐based catalysts contained inner double bonds accompanied by the generation of hydrogen, presumably because of a C H bond activation mechanism. The contents of the inner double bonds were significantly influenced by the polymerization conditions, including the 1‐hexene feed content, polymerization temperature, and ethylene pressure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4641–4648, 2000