Quasiclassical trajectory calculations to evaluate a kinematic constraint on internal energy in suprathreshold collision energy abstraction reactions

Experimentally observed product quantum state distributions across a wide range of abstraction reactions at suprathreshold collision energies have shown a strong bias against product internal energy. Only a fraction, sometimes quite a small fraction, of the energetically accessible product quantum states are populated. Picconatto et al. [J. Chem. Phys. 114, 1663 (2001)] noted a simple mathematical relationship between the highest-energy rovibrational states observed and the kinematics of the reaction system. They proposed a reaction model based on reaction kinematics that quantitatively explains this behavior. The model is in excellent agreement with measured quantum state distributions. The assumptions of the model invoke detailed characteristics of reactive trajectories at suprathreshold collision energies. Here we test those assumptions using quasiclassical trajectory calculations for the abstraction reactions H+HCl-->H2+Cl, D+HCl-->HD+Cl, and H+DCl-->HD+Cl. Trajectories were run on a potential-energy surface calculated with a London-Eyring-Polyani-Sato function with a localized 3-center term (LEPS-3C) previously shown to accurately reproduce experimentally observed product state distributions for the H+HCl abstraction reaction. The trajectories sample collision energies near threshold and also substantially above it. Although the trajectories demonstrate some aspects of the model, they show that it is not valid. However, the inadequacy of the proposed model does not invalidate the apparent kinematic basis of the observed energy constraint. The present results show that there must be some other molecular behavior rooted in the reaction kinematics that is the explanation and the source of the constraint.     

Thermal and mechanical properties of radiation crosslinked poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether)

The effect of irradiation temperature on the polymer properties was investigated for the fluoroelastomer poly(tetrafluoroethylene-co-perfluoromethylvinyl ether) (TFE/PMVE). TFE/PMVE samples were γ-irradiated to 150 kGy at temperatures ranging from 77 K to 373 K. Analysis of the sol/gel behaviour, tensile properties, and glass transition temperatures indicated that crosslinking commenced in the temperature range 195 to 263 K, for a dose of 150 kGy. The latter temperature was 13 K below the glass transition temperature. Crosslinking remained relatively constant to higher temperatures. Chain scission reactions were found to occur well below the glass transition temperature and increased at higher temperatures. The optimum temperature for the radiation crosslinking of TFE/PMVE, for the temperatures investigated, was 263 K.     

Microfabrication of three-dimensional bioelectronic architectures

The functionality and structural diversity of biological macromolecules has motivated efforts to exploit proteins and DNA as templates for synthesis of electronic architectures. Although such materials offer promise for numerous applications in the fabrication of cellular interfaces, biosensors, and nanoelectronics, identification of techniques for positioning and ordering bioelectronic components into useful patterns capable of sophisticated function has presented a major challenge. Here, we describe the fabrication of electronic materials using biomolecular scaffolds that can be constructed with precisely defined topographies. In this approach, a tightly focused pulsed laser beam capable of promoting protein photo-cross-linking in specified femtoliter volume elements is scanned within a protein solution, creating biomolecular matrices that either remain in integral contact with a support surface or extend as free-standing structures through solution, tethered at their ends. Once fabricated, specific protein scaffolds can be selectively metallized via targeted deposition and growth of metal nanoparticles, yielding high-conductivity bioelectronic materials. This aqueous fabrication strategy opens new opportunities for creating electronic materials in chemically sensitive environments and may offer a general approach for creating microscopically defined inorganic landscapes.     

Chemical fractionation in the solar system

The cosmochemical and geochemical history of planetary material is reflected in relative and absolute abundances of two groups of trace elements; siderophiles and volatiles. Many of these elements can be determined at the requires levels only by radiochemical neutron activation analysis. The abundance patterns of elements in chondritic meteorites result from condensation processes in the solar nebula. The composition of planetisimals which bombarded the Moon is characterized from trace elements in lunar breccias, and is also related to nebula processes. Trace elements in anorthosites and basalts from Earth and Moon suggest that the Moon is refractory-rich and volatile-poor relative to the Earth.     

Rhodium carbene complexes as hydrosilylation catalysts

The catalytic activity of various rhodium carbene complexes has been investigated. These complexes are active for the hydrosilylation of a wide variety of unsaturated organic molecules such as olefins, acetylenes and dienes. Their activity is comparable to other rhodium(I) complexes previously used as hydrosilylation catalysts. The yield of products is found to vary with catalyst, silane and organic substrate.     

Hairdressing shish-kebabs; comprehensive survey and theoretical discussion of overgrowth crystallization

The platelet component of shish-kebabs crystallizes after the core, during cooling or storage below the formation temperature of the core. Three basic platelet morphologies were previously identified which were mutually interconvertible, a process we have termed “hairdressing”. In this paper we show that these three categories are special cases of a continuous range of overgrowth spacings. Crystallization at high temperatures gives widely spaced overgrowths and, as the crystallization temperature is reduced, so the overgrowth spacing decreases gradually. In the extreme case (only obtainable by quenching) the overgrowths become so close as to overlap and appear continuous. We also report a variety of further effects which were caused by exposing the shish-kebabs, while in solvent, to temperatures above their initial formation temperature. A new theoretical approach is described which considers the depletion of material available to form new overgrowths during crystallization. Two versions of this theory are presented (one a computer simulation and one analytic); interpreting our results on the basis of this theory we show that shish-kebabs crystallize at high temperatures even when quenched (90°C and above except in a few exceptional circumstances) and we are able to explain all the features of shish-kebab crystallization that we have observed.     

Supercritical fluid extraction of 2,4-D from soils using derivatization and ionic modifiers

Supercritical fluid extraction (SFE) with CO(2), a clean and rapid alternative to conventional organic solvent extraction techniques, was investigated for the extraction of 2,4-D from soils using a variety of pre-extraction soil treatments to enhance extraction recoveries. Initial experiments with silylation, ion-pairing, methyl esterification, and ionic displacement are reported. Methyl esterification and ionic displacement during SFE proved to be the most promising approaches for quantitative extraction. Although the SFE procedures were not fully optimized, comparison between SFE and a standard Soxhlet extraction method demonstrated the potential for improving analytical measurement for highly polar pesticides in soil by modifying SFE-CO(2) extraction with derivatizing reagents and ionic solutions.     

Frequency-Dependent Streaming Potentials

An experimental apparatus and data acquisition system was constructed to measure the streaming potential coupling coefficients as a function of frequency. The purpose of the experiments was to measure, for the first time, the real and imaginary portion of streaming potentials. In addition, the measured frequency range was extended beyond any previous measurements. Frequency-dependent streaming potential experiments were conducted on one glass capillary and two porous glass filters. The sample pore diameters ranged from 1 mm to 34 μm. Two frequency-dependent models (Packard and Pride) were compared to the data. Both Pride's and Packard's models have a good fit to the experimental data in the low- and intermediate-frequency regime. In the high-frequency regime, the data fit the theory after being corrected for capacitance effects of the experimental setup. Pride's generalized model appears to have the ability to more accurately estimate pore sizes in the porous medium samples. Packard's model has one unknown model parameter while Pride's model has four unknown model parameters, two of which can be independently determined experimentally. Pride's additional parameters may allow for a determination of permeability. Copyright 2001 Academic Press.     

Reactions of trivacant Wells-Dawson heteropolytungstates. Ionic strength and Jahn-Teller effects on formation in multi-iron complexes

Reaction of alpha-P(2)W(15)O(56)(12-) and Fe(III) in a saturated NaCl solution produces a trisubstituted Wells-Dawson structure with three low-valent metals, alpha-(Fe(III)Cl)(2)(Fe(III)OH(2))P(2)W(15)O(59)(11-) (1). Dissolution of this species into 1 M NaBr (Br(-) is non-coordinating) gives the triaquated species alpha-(Fe(III)OH(2))(3)P(2)W(15)O(59)(9-) (2). Ionic strength values of 1 M or greater are necessary to avoid decomposition of 1 or 2 to the conventional sandwich-type complex, alpha beta beta alpha-(Fe(III)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(12-) (3). If the pH is greater than 5, a new triferric sandwich, alpha alpha beta alpha-(NaOH(2))(Fe(III)OH(2))Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (4), forms rather than 3. Like the previously reported Wells-Dawson-derived sandwich-type structures with three metals in the central unit ([TM(II)Fe(III)(2)(P(2)W(15)O(56))(P(2)TM(II)(2)W(13)O(52))],(16-) TM = Cu, Co), this complex has a central alpha-junction and a central beta-junction. Thermal studies suggest that 4 is more stable than 3 over a wide range of temperatures and pH values. The intrinsic Jahn-Teller distortion of d-electron-containing metal ions incorporated into the external sites of the central multi-metal unit impacts the stoichiometry of their incorporation (with a consequent change in the inter-POM-unit connectivity, where POM = polyoxometalate). Reaction of non-distorting Ni(II) with the diferric lacunary sandwich-type POM alpha alpha alpha alpha-(NaOH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(16-) (5) produces alpha beta beta alpha-(Ni(II)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (6), a Wells-Dawson sandwich-type structure with two Ni(II) and two Fe(III) in the central unit. All structures are characterized by (31)P NMR, IR, UV-vis, magnetic susceptibility, and X-ray crystallography. Complexes 4 and 6 are highly selective and effective catalysts for the H(2)O(2)-based epoxidation of alkenes.     

A one-step synthesis of γ-pyrones

The potassium enolate of 4-methoxy-3-buten-2-one reacts with acid chlorides anhydrides and acylimidazoles by C-acylation and $\text{in situ}$ cyclization to afford 2-substituted γ-pyrones directly.