Application of low-pressure gas chromatography/tandem mass spectrometry to the determination of pesticide residues in tropical fruits

A multiresidue method has been developed for determining pesticide residues in the tropical fruits kiwi, custard apple, and mango. The intended purpose of the method is for regulatory analyses of commodities for pesticides that have established maximum residue limits. A fast and simple extraction method with cyclohexane-ethyl acetate (1 + 1, v/v) and a high-speed homogenizer was optimized. Pressurized liquid extraction was evaluated as an alternative automated extraction technique. The pesticide residues were determined by using low-pressure gas chromatography coupled to tandem mass spectrometry. The proposed methodology was validated for each matrix. Pesticide recoveries ranged from 70 to 110%, with repeatability relative standard deviations of < or = 18% at spiking levels of 12 and 50 microg/kg. The limits of quantitation were in the range of 0.03-6.17 microg/kg, and the limits of detection were between 0.01 and 3.75 microg/kg. Mango can be selected as a representative matrix for calibration on the basis of the results of a potential matrix effect study. The method was successfully applied to the determination of pesticide residues in real samples in Spain.     

Simultaneous determination of gasoline oxygenates and benzene, toluene, ethylbenzene and xylene in water samples using headspace-programmed temperature vaporization-fast gas chromatography-mass spectrometry

A sensitive method is presented for the fast analysis of seven fuel oxygenates (methanol, ethanol, tert-butyl alcohol (TBA), methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME) and diisopropyl ether (DIPE)) and benzene, toluene, ethylbenzene and p-xylene (BTEX) in water samples. The applicability of a headspace (HS) autosampler in combination with a GC device equipped with a programmable temperature vaporizer (PTV) and a MS detector is explored. The proposed method achieves a clear improvement in sensitivity with respect to conventional headspace methods due to the use of the PTV. Two different packed liners with materials of different trapping strengths (glass wool and Tenax-TA) were compared. The benefits of using Tenax-TA instead of glass wool as packed material for the measurement of the 11 compounds emerged as better signal-to-noise ratios and hence better detection limits. The proposed method is extremely sensitive. The limits of detection are of the order of ng/L for six of the compounds studied and of the order of microg/L for the rest, with the exception of the most polar and volatile compound: methanol. Precision (measured as the relative standard deviation for a level with an S/N ratio close to 3) was equal to or lower than 15% in all cases. The method was applied to the determination of the analytes in natural matrixes (tap, river and sea water) and the results obtained can be considered highly satisfactory. The methodology has much lower detection limits than the concentration limits proposed in drinking water by the US Environmental Protection Agency (EPA) and the European Union for compounds under regulation.     

Extract-photometric determination of vanadium(V) with 3-indole-acetohydroxamic acid

Summary A spectrophotometric study has been carried out of the violet complex 3-indole-acetohydroxamic acid-vanadium extracted into a solution of trioctylmethyl-ammonium chloride in toluene [_max 525 nm; =5381 l mol^–1 cm^–1; stoichiometry 1:3 (metal:reagent)]. A new method for the extract-spectrophotometric determination of V⁵⁺ in the range of 2–7 g/g is proposed and interferences by foreign ions were investigated. The method has been satisfactorily applied to the determination of vanadium(V) in fuel oil. The relative error is ±2.9%.     

Effectiveness of Photodynamic Therapy in Elimination of HPV‐16 and HPV‐18 Associated with CIN I in Mexican Women

This study aimed to determine the effectiveness of photodynamic therapy (PDT), using δ‐aminolevulinic acid (5‐ALA), in the elimination of premalignant cervical lesions in Mexican patients with human papillomavirus (HPV) infection and/or cervical intraepithelial neoplasia (CIN). Thirty women diagnosed with CIN I and/or positive for HPV participated in the study. Topical 6% 5‐ALA in gel form was applied to the uterine cervix; after 4 h, the lesion area was irradiated with a light dose of 200 J cm^?2 at 635 nm. This procedure was performed three times at 48‐h intervals. Clinical follow‐up was performed at 3, 6, and 12 months after the initial PDT administration, by colposcopy, cervical cytology, histopathological analysis, polymerase chain reaction, and hybrid capture. Of HPV‐infected patients without evidence of CIN I, 80% cleared the infection, while HPV associated with CIN I was eliminated in 83% of patients (P < 0.05). At 12 months, CIN I had regressed in 57% of patients, although this response was not statistically significant. PDT using 6% 5‐ALA is concluded to be effective in eliminating HPV infection associated or not with CIN I.     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.     

Polysaccharide Structures and Their Hypocholesterolemic Potential

Several classes of polysaccharides have been described to have hypocholesterolemic potential, namely cholesterol bioaccessibility and bioavailability. This review will highlight the main mechanisms by which polysaccharides are known to affect cholesterol homeostasis at the intestine, namely the effect (i) of polysaccharide viscosity and its influence on cholesterol bioaccessibility; (ii) on bile salt sequestration and its dependence on the structural diversity of polysaccharides; (iii) of bio-transformations of polysaccharides and bile salts by the gut microbiota. Different quantitative structure–hypocholesterolemic activity relationships have been explored depending on the mechanism involved, and these were based on polysaccharide physicochemical properties, such as sugar composition and ramification degree, linkage type, size/molecular weight, and charge. The information gathered will support the rationalization of polysaccharides’ effect on cholesterol homeostasis and highlight predictive rules towards the development of customized hypocholesterolemic functional food.     

New Ideas for Understanding the Structure and Magnetism in AgF2: Prediction of Ferroelasticity

In the search for new high-temperature superconductors, it has been proposed that there are strong similarities between the fluoroargentate AgF₂ and the cuprate La₂CuO₄. We explored the origin of the possible layered structure of AgF₂ by studying its parent high-symmetry phase and comparing these results with those of a seemingly analogous cuprate, CuF₂. Our findings first stress the large differences between CuF₂ and AgF₂. Indeed, the parent structure of AgF₂ is found to be cubic, naturally devoid of any layering, even though Ag²⁺ ions occupy trigonal sites that, nevertheless, allow the existence of a Jahn-Teller effect. The observed Pbca orthorhombic phase is found when the system is cooperatively distorted by a local E⊗e trigonal Jahn-Teller effect around the silver sites that creates both geometrical and magnetic layering. While the distortion implies that two Ag²⁺−F⁻ bonds increase their distance by 15 % and become softer, our simulations indicate that covalent bonding and interlayer electron hopping is strong, unlike the situation in cuprate superconductors, and that, in fact, exfoliation of individual planes might be a harder task than previously suggested. As a salient feature, these results prove that the actual magnetic structure in AgF₂ is a direct consequence of vibronic contributions involved in the Jahn-Teller effect. Finally, our findings show that, due to the multiple minima intrinsic to the Jahn-Teller energy surface, the system is ferroelastic, a property that is strongly coupled to magnetism in this argentate.     

The Photophysics and Photochemistry of Melanin- Like Nanomaterials Depend on Morphology and Structure

Melanin-like nanomaterials have found application in a large variety of high economic and social impact fields as medicine, energy conversion and storage, photothermal catalysis and environmental remediation. These materials have been used mostly for their optical and electronic properties, but also for their high biocompatibility and simplicity and versatility of preparation. Beside this, their chemistry is complex and it yields structures with different molecular weight and composition ranging from oligomers, to polymers as well as nanoparticles (NP). The comprehension of the correlation of the different compositions and morphologies to the optical properties of melanin is still incomplete and challenging, even if it is fundamental also from a technological point of view. In this minireview we focus on scientific papers, mostly recent ones, that indeed examine the link between composition and structural feature and photophysical and photochemical properties proposing this approach as a general one for future research.     

Organo-Polyoxometalate-Based Hydrogen-Bond Catalysis

Several urea-inserted organo-polyoxometalates (POMs) derived from polyoxotungstovanadate [P₂V₃W₁₅O₆₁]⁹⁻ were prepared. The insertion of the carbonyl into the polyoxometallic framework activates the urea toward Hydrogen-bond catalysis. This was shown on the Friedel-Crafts arylation of trans-β-nitrostyrene. Modelling shows that the most stable form of the organo-POMs features a cis-trans arrangement of the two N−H bonds, but that the likely catalytically active trans-trans form is accessible at room temperature. Finally, it is possible that the oxo substituents next to the vanadium atoms may help the approach of the nucleophile via H-bonding.