Microgravimetric study of electrochemically controlled nucleophilic addition of sulfite to polyaniline

The sulfonation of polyaniline (PANI) films by nucleophilic addition of sulfite ion has been controlled through the polymer oxidation state under electrochemical control. The process was monitored by in situ electrochemical quartz crystal microbalance (EQCM), and the polymer oxidation was accomplished by electrode potential steps in sulfite aqueous solutions. The nucleophilic addition of sulfite to PANI only takes place on the oxidized polymer. From the ratio of added mass to the injected charge, the degree of sulfonation has been obtained with a yield as high as 50%. It has been observed that the ion-exchange mechanism during the oxidation-reduction process in the resulting sulfonated polymer is analogous to the polymer produced by electrophilic sulfonation of polyaniline or by copolymerization of aniline with aminosulfonic acids, unlike the ionic exchange observed for unmodified PANI.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Detection of atmospheric nitrogen dioxide using a miniaturised fibre-optic spectroscopy system and the ambient sunlight

A miniaturised fibre-optic spectrometer based system is presented for direct detection of one of the major atmospheric pollutants, nitrogen dioxide, by absorption spectroscopy using the ambient sunlight as light source. The detection system consists of a 10 cm collimator assembly, a fibre-optic cable and a portable diode-array spectrometer. The absorbance spectrum of the open-path is calculated using a reference spectrum recorded when the nitrogen dioxide (NO2) concentration in the atmosphere is low. The relative concentration of the pollutant is calculated normalising the detected spectra and subtracting the background broadband spectrum from the specific NO2 absorbance features, since the broadband spectrum changes according to atmospheric conditions and solar intensity. Wavelengths between 400 and 500 nm are used in order to maximise sensitivity and to avoid interference from other species. Calibration is carried out using Tedlar sample bags of known concentration of the pollutant. A commercial differential optical absorption spectroscopy (DOAS) system is used as a reference standard detection system to compare the results with the new system. Results show that detection of NO2 at typical urban atmospheric levels has been achieved using an inexpensive field based fibre-optic spectrometer and a readily available, easy to align, light source. In addition the new system can be used to get a semi-quantitative estimation of the nitrogen dioxide concentration within errors of 20%. While keeping the typical benefits of open-path techniques, the new system has important advantages over them such as cost, simplicity and portability.     

A comparison between ICP-MS and AFS detection for arsenic speciation in environmental samples

Performances of two atomic detectors, Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Atomic Fluorescence Spectrometry (AFS) have been compared for arsenic speciation in environmental samples. Instrumental couplings, based on the use of high performance liquid chromatography (HPLC), hydride generation (HG), and the two atomic detectors were used for the speciation of arsenite, arsenate, dimethylarsinic acid and monomethylarsonic acid. Optionally, arsenobetaine was also determined using on-line ultraviolet (UV) photooxidation. The detection limits ranging from 0.1 to 0.3 mug l(-1) (as As) and the precision >10% RSD obtained with HPLC-(UV)-HG-AFS were comparable with those obtained with HPLC-(UV)-HG-ICP-MS. Both instrumental coupling were applied to the NRCC-TORT-1 and several environmental samples, such as seawater, freshwater, sediments, bivalves and bird eggs, taken from two areas with different degrees of pollution. No influence of the sample matrix was observed on the results using external calibration and standard additions methods, for both coupled techniques.     

Determination of paraquat in human blood plasma using reversed-phase ion-pair high-performance liquid chromatography with direct sample injection

This report describes the determination of paraquat (PQ) in human blood plasma samples by a direct-injection reversed-phase ion-pair chromatographic method. Blood plasma filtrate was injected directly into the LiChrospher® RP-18 alkyl-diol silica (ADS) precolumn integrated in a column switching system using a mixture of 3% 2-propanol and 10 mM sodium octane sulfonate (SOS) in a 0.05 M phosphate buffer (pH 2.8). After washing with this phase, the ADS precolumn was back-flushed with the analytical mobile phase consisting of 40% of methanol and 10 mM SOS in a 0.05 M phosphate buffer (pH 2.8) at a flow rate of 1.0 ml min⁻¹, in order to carry the analyte to a conventional reversed-phase analytical column, where the separation of PQ was achieved and finally detected by UV at 258 nm. The recoveries of PQ from human blood plasma samples ranged between 95.0 and 99.5% at nine different concentrations (from 0.05 to 3.00 μg of PQ ml⁻¹) with coefficients of variation <2.5% (n=3). The precision expressed as relative standard deviation was below 3.5% for between-day and below 4.3% for within-day measurements (n=5). The detection limit (signal-to-noise ratio, S/N>3) was 0.005 μg ml⁻¹ with an injection volume of 200 μl. The proposed method is promising for the identification and quantification of PQ at low concentration levels and is suitable for its analysis in human blood plasma samples from intentional or accidental poisonings cases with a sample throughput of 5 samples per hour.     

Crystal structure of potassium tetramethylammonium hexacyanocobaltate(III) trihydrate: K3(Me4N)3[Co(CN)6]2·3H2O

The structure of K₃(Me₄N)₃[Co(CN)₆]₂·3H₂O has been determined from three-dimensional X-ray diffraction data. The unit cell is formed by parallel layers of cobalt octahedra [CoC₆] and potassium octahedra, [K(1)N₅O(1)], separated byc/2. In each layer both types of octahedra are located alternatively. The [MeN₄]⁺ tetrahedra are located in the cavities between the two layers of octahedra. The crystal structure of this compound is the first example of its type. TMC 2483     

A Closed-Form Relation for Dimension-Dependent Two-Electron Matrix Elements of the Interelectronic Distance

The evaluation of matrix elements of two electron atoms is fundamental for the study of the electronic properties of those systems. We add to this knowledge by presenting an explicit expression for the matrix elements of the inverse of the interelectronic distance of two-electron atoms in any spatial dimension D. The basis functions used are the D-dependent hydrogenic wavefunctions {1s ²,2p ²,3d ²,4f ²,5g ²,...,21y ²,...}, extending and including, in this way, the results of the previous basis set {1s ²,2p ²,3d ²,4f ²}. The methodology used does not employ Fourier integral transforms as in previous works but hypergeometric transformation formulas.     

Acid/extraction treatment of bivalves for organotin speciation

A method is described for leaching of nanogram amounts of monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), monophenyltin (MPT), diphenyltin (DPT), triphenyltin (TPT), and monomethyltin (MMT) from bivalves. The procedure is based on soaking the samples in a water-hydrogen bromide mixture (1:1) with magnetic stirring for 30 min followed by extraction with a 0.04% (w/v) tropolone solution in dichloromethane for 2 h. Organotins are determined by GC-FPD after clean-up through a Florisil column and fat hydrolysis by 1mol/L NaOH, followed by derivatization through Grignard pentylation. The method has been applied for an investigation of the occurrence of organotins in bivalves in south-west Spain. Received: 3 September 1994 / Revised: 2 October 1996 / Accepted: 7 November 1996     

New [Mo(eta3-allyl)(CO)2L3]+ complexes with monodentate or tridentate nitrogen-donor ligands

Cationic complexes [Mo(eta(3)-allyl)(CO)2L3]+ (L3 = either nitrogen-donor tridentate ligand or three monodentate ligands) were prepared in high yield and under mild conditions using as precursors either the triflato complex [Mo(eta(3)-allyl)(OTf)(CO)2(NCMe)2] or the combination of the chloro complex [Mo(eta(3)-allyl)Cl(CO)2(NCMe)2] and the salt NaBAr'(4)(Ar'= 3,5-bis(trifluoromethyl)phenyl). The tridentate ligands employed were 2,2':6',2'-terpyridine (terpy) and cis,cis-1,3,5-cyclohexanetriamine (CHTA), whereas the monodentate ligands imidazole (im) and 3,5-dimethylpyrazole (dmpz) were chosen. In order to stabilize the labile intermediates, an excess of acetonitrile was used in most of the syntheses. However, the pyrazole complex was prepared through a nitrile-free route to avoid reactions at the coordinated nitrile. The solid state structures of [Mo(eta(3)-methallyl)(CO)2(terpy)]OTf (2), [Mo(eta(3)-methallyl)(CO)2(CHTA)]BAr'4 (3), [Mo(eta(3)-methallyl)(CO)2(NCMe)3]BAr'4 (4), [Mo(eta(3)-allyl)(CO)2(im)3]OTf (5) and [Mo(eta(3)-allyl)(CO)2(dmpz)3]BAr'4 (6) were determined by means of single-crystal X-ray diffraction.     

Selectivity assessment of a sequential extraction procedure for metal mobility characterization using model phases

This study considers the selectivity of the extractants used in a sequential extraction scheme for metals mobility assessment by analyzing individual mineral phases previously coprecipitated or sorbed with trace metals. The scheme evaluated was a modification of the Tessier et al. [A. Tessier, P.G.C. Campbell, M. Bisson, Anal. Chem. 51 (1979) 844] sequential procedure proposed by the authors. The phases studied were calcite, amorphous iron oxide, hausmannite, humic acid, kaolinite and illite. Selective extractions were obtained for As, Cr, Cu, Ni, Pb and Zn in metal-coprecipitated phases whereas NH(2)OH-HCl was not selective for the extraction of Hg and Cd coprecipitated in hausmannite and amorphous iron oxide, respectively. Otherwise, Cd, Hg, Ni and Zn sorbed on the different phases were released with MgCl(2) and NaOAc/HOAc, but stronger reagents were needed to release As, Cr, Cu and Pb.