Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

Charge rearrangement and screening in a quantum point contact

Compressibility measurements are performed on a quantum point contact (QPC). Screening due to mobile charges in the QPC is measured quantitatively, using a second point contact. These measurements are performed from pinch-off through the opening of the first few modes in the QPC. While the measured signal closely matches a Thomas-Fermi-Poisson prediction, deviations from the classical behavior are apparent near the openings of the different modes. Density functional calculations attribute the deviations to a combination of a diverging density of states at the opening of each one-dimensional mode and exchange interaction, which is strongest for the first mode.     

High pressure studies using two-stage diamond micro-anvils grown by chemical vapor deposition

Ultra-high static pressures have been achieved in the laboratory using a two-stage micro-ball nanodiamond anvils as well as a two-stage micro-paired diamond anvils machined using a focused ion-beam system. The two-stage diamond anvils’ designs implemented thus far suffer from a limitation of one diamond anvil sliding past another anvil at extreme conditions. We describe a new method of fabricating two-stage diamond micro-anvils using a tungsten mask on a standard diamond anvil followed by microwave plasma chemical vapor deposition (CVD) homoepitaxial diamond growth. A prototype two-stage diamond anvil with 300?µm culet and with a CVD diamond second stage of 50?µm in diameter was fabricated. We have carried out preliminary high pressure X-ray diffraction studies on a sample of rare-earth metal lutetium sample with a copper pressure standard to 86?GPa. The micro-anvil grown by CVD remained intact during indentation of gasket as well as on decompression from the highest pressure of 86?GPa.     

Supercapacitive Swing Adsorption of Carbon Dioxide

An electrical effect, the supercapacitive swing adsorption (SSA) effect is reported, which allows for reversible adsorption and desorption of carbon dioxide by capacitive charge and discharge of electrically conducting porous carbon materials. The SSA effect can be observed when an electrically conducting, nanoporous carbon material is brought into contact with carbon dioxide gas and an aqueous electrolyte. Charging the supercapacitor electrodes initiates the spontaneous organization of electrolyte ions into an electric double layer at the surface of each porous electrode. The presence of this double layer leads to reversible, selective uptake and release of the CO₂ as the supercapacitor is charged and discharged.     

Trinuclear Gold Clusters Supported by Cyclic (alkyl)(amino)carbene Ligands: Mimics for Gold Heterogeneous Catalysts

The synthesis of air‐ and moisture‐stable trinuclear mixed‐valence gold(I)/gold(0) clusters is described. They promote the catalytic carbonylation of amines under relatively mild conditions. The synthetic route leading to the trinuclear clusters involves a simple ligand exchange from the readily available μ³‐oxo‐[(Ph₃PAu)₃O]⁺ complex. This synthetic method paves the way for the preparation of a variety of mixed‐valence gold(I)/gold(0) polynuclear clusters. Moreover, the well‐defined nature of the complexes demonstrates that the catalytic process involves a rare example of a definite change of oxidation state of gold from Au⁰₂Au^I to Au^I₃.     

Telluride Misfit Layer Compounds: [(PbTe)1.17]m(TiTe2)n

Telluride misfit layer compounds are reported for the first time. These compounds were synthesized using a novel approach of structurally designing a precursor that would form the desired product upon low‐temperature annealing, which allows the synthesis of kinetically stable products that do not appear on the equilibrium phase diagram. Four new compounds of the [(PbTe)_1.17]_m(TiTe₂)_n family are reported, and their structures were examined by a variety of X‐ray diffraction techniques.     

Photoprotection of Mammalian Acid-Soluble Collagen by Cuttlefish Sepia Melanin In Vitro

Several important clinical conditions can result in close association between the pigment melanin and dermal collagen. Because melanin and its precursors can be chemically reactive in ground and excited states, it is important to know whether the resulting melanin-collagen interaction results in photoprotection or photoaggression. Acidic and neutral air-saturated collagen suspensions (0.033%) were irradiated with0–2.6 times 104 J/m2 UVC or with0–83 times 104 J/m2 solar-simulating UV radiation (SSR). Photochemical destruction of a photolabile collagen fluorophore (δ_em 360 nm) and collagen chain degradation were monitored as functions of irradiation time in the presence and absence of added (0–100μg) sepia eumelanin. Melanin retarded collagen photodamage but did not qualitatively alter the fluorescence fading kinetics. Both H202 and 02 can be produced by UV irradiation of eumelanin. Added H202 and K02 destroyed collagen fluorescence and caused 50% chain degradation at ca10–20-fold molar excess. Previous studies have demonstrated that eumelanins efficiently scavenge 02 . We demonstrated that eumelanin also efficiently scavenges H202 as evidenced by its ability to (a) compete with scopoletin for peroxide uptake and (b) directly take up H202 through a dialysis bag. The latter observation suggests that peroxide scavenging could occur in vivo by melanin sequestered in melanophages. Thus, neither UV-generated 02 nor H202 are likely to be present in concentrations high enough to cause measurable collagen damage. Absorption and/or scattering of excitation radiation away from the target chromophore appears to be the primary photoprotection mechanism, although scavenging of active 02 intermediates may play an important, if subtle role.     

Mass Activated Droplet Sorting (MADS) Enables High‐Throughput Screening of Enzymatic Reactions at Nanoliter Scale

Microfluidic droplet sorting enables the high‐throughput screening and selection of water‐in‐oil microreactors at speeds and volumes unparalleled by traditional well‐plate approaches. Most such systems sort using fluorescent reporters on modified substrates or reactions that are rarely industrially relevant. We describe a microfluidic system for high‐throughput sorting of nanoliter droplets based on direct detection using electrospray ionization mass spectrometry (ESI‐MS). Droplets are split, one portion is analyzed by ESI‐MS, and the second portion is sorted based on the MS result. Throughput of 0.7 samples s^?1 is achieved with 98 % accuracy using a self‐correcting and adaptive sorting algorithm. We use the system to screen ≈15 000 samples in 6 h and demonstrate its utility by sorting 25 nL droplets containing transaminase expressed in vitro. Label‐free ESI‐MS droplet screening expands the toolbox for droplet detection and recovery, improving the applicability of droplet sorting to protein engineering, drug discovery, and diagnostic workflows.     

Ultraviolet radiation as a limiting factor in leaf expansion and development

Reductions in leaf growth are a commonly observed response to ultraviolet radiation, but the underlying mechanisms remain poorly defined. This study examined the response of leaves exposed to a UV environment across a range of organizational scales, including leaf expansion rate, epidermal cell size and number, biomechanical properties, leaf–water relations and activity of cell-wall peroxidases. Two experimental approaches were used; Lettuce ( Lactuca sativa L.) plants were propagated under (a) supplementary UV-B (9 kJ m⁻² day⁻¹) in controlled environment (CE) conditions, and (b) field conditions, where plants were placed under three horticultural films with differing UV transmissions. In both experiments, UV-B caused the greatest reductions in leaf expansion and final leaf size, with some reductions attributable to UV-A wavelengths. In supplementary UV-B conditions, adaxial cell size was reduced, while in field plants, both cell size and cell number were lower in an increased UV environment, as was the case with abaxial cells in CE plants. Although leaf turgor and leaf extensibility were not affected by UV wavelengths, breaking strain of leaf tissue was decreased under supplementary UV-B. Cell-wall peroxidase activity was increased in both supplementary UV conditions and in the field, where only a zero UV environment showed no upregulation of cell-wall peroxidase.