Synthesis and Characterization of Triphenylphosphine Oxide-Containing Poly(Aryl Imide)-Poly(Dimethyl Siloxane) Randomly Segmented Copolymers

Abstract

Poly(aryl imide)-poly(dimethyl siloxane) randomly segmented copolymers were synthesized by essentially a one-step solution imidization process in a solvent system consisting of predominately o-dichlorobenzene with a small amount of n-methylpyrolidone. This solvent combination was selected because of its ability to afford homogeneous solutions throughout the polymerization process. This enabled copolymers of any desired poly(dimethyl siloxane) composition to be prepared. A hydrolytically stable triphenylphosphine oxide containing diamine, bis(3-amino-phenoxy-4′-phenyl)phenylphosphine oxide, was utilized as a chain extender and together with oxydiphthalic anhydride formed the hard segment in these copolymers. The soft segment was formed from α,ω-aminopropyl poly(dimethyl siloxane) oligomers of controlled molecular weight. The presence of phosphorus and silicon contributes several unique properties to the system, including enhanced solubility, thermal stability, and flame resistance. High molecular weight copolymers containing up to 60% (w/w) of the poly(dimethyl siloxane) segments were successfully prepared using this method. Gel permeation chromatography analysis, based on a universal calibration curve in CHCl₃, was performed to determine the molecular weights and distribution. These copolymers with 40-60% (w/w) poly(dimethyl siloxane) exhibited upper T_g values ranging from 130 to 180°C and showed substantial char yields at 750°C in air, which increased with siloxane content. Dynamic mechanical analysis confirmed the anticipated microphase behavior by the presence of two separate glass-transition regions. Both small angle x-ray scattering and transmission electron microscopy measurements determined on well-characterized transparent cast films were used to better demonstrate the multiphase nature of these copolymers.     

Separation of five oligostilbenes from Vitis amurensis by flow‐rate gradient high‐performance counter‐current chromatography

A rapid and efficient high‐performance counter‐current chromatography (HPCCC) method was developed to separate five oligostilbenes from the roots of Vitis amurensis. An n‐hexane/ethyl acetate/methanol/water system (4:8:4:10, v/v/v/v) was selected as an optimal two‐phase solvent system of which the upper phase was used as the stationary phase and the lower phase was used as the mobile one. Partition coefficient values for the target compounds under these optimized conditions were 0.28 ( 1 , ampleosin A), 7.12 ( 2 , (+)‐g‐viniferin), 2.26 ( 3 , vitisin A), 5.38 ( 4 , wilsonol C), and 11.23 ( 5 , vitisin B). Flow‐rate gradient HPCCC (4 mL/min in 0–70 min, 8 mL/min in 70–250 min) was applied to isolate the target compounds in as high purity as possible within the shortest possible run time. Under these conditions, ampelopsin A (12.1 mg), (+)‐g‐viniferin (10.4 mg), vitisin A (2.8 mg), wilsonol C (3.2 mg), and vitisin B (37 mg) were isolated with >95% purity from 150 mg of enriched oligostilbene extract. Although the K_D of the last eluted compound, vitisin B (K_D = 11.23), was relatively large, it was eluted in 115–145 min using the two‐phase solvent system. This study shows that HPCCC is an efficient tool for the isolation and purification of natural products.     

Polycondensation of Sebacic Acid with Primary and Secondary Hydroxyl Groups Containing Diols Catalyzed by Candida antarctica Lipase B

Abstract

The aliphatic polyesters are normally synthesized by ester interchange reactions or direct esterification of hydroxyacids or diacid/diol combinations. Biotransformation, utilizing the enzymes as catalysts, was accepted as an alternative route for the synthesis of aliphatic polyesters and offers various advantages compared with the conventional, metal-catalyzed polymerization reactions. Previous studies indicated that lipase-catalyzed polycondensation reactions between diols and diacids occurred preferentially at primary hydroxyl groups of diols, when diols contained both primary and secondary hydroxyl groups. In this work, we investigated lipase-catalyzed polycondensation of diacids and secondary hydroxyl group–containing diols, and successfully synthesized polyesters by polycondensation with secondary hydroxyl groups as well as primary hydroxyl groups. Various diols, glycerol, 1,2-propanediol, 1,3-butanediol, 2,3-butanediol, and 2,4-pentanediol were tested for the polycondensation. The polymerization was achieved by heating a mixture of lipase B, sebacic acid, and the diols in anhydrous toluene at 100 °C for 72 h. The resulting polymers were characterized by ¹H and ¹³C NMR spectroscopy, Fourier transform–infrared spectroscopy, thermogravimetric analysis, and gel permeation chromatography.     

A one-pot tandem synthesis of various 1,2-disubstituted benzimidazoles

A facile method to synthesize various 1,2-disubstituted benzimidazoles is developed. It is suggested that formation of a Meisenheimer adduct between the substrate, amine, and solvent aids the N-arylation process. The generality of the protocol is demonstrated by the efficient reactions involving numerous substituents ranging from electron-withdrawing groups to electron-donating groups.     

Changes in the physical properties of low bandgap polymer after interaction with ionic liquids

Over the past few years, polymers shown comprehensive utilization in optical devices, solar cells, sensors, and other such devices. However, the efficiency of these devices remains a problem. We have synthesized new thiophene based, lowband gap polymer, poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole) (PHVTS) and investigated the interactions between the PHVTS and ionic liquids (ILs), in this study. We have used imidazolium- and ammonium-family ILs, and studied the interactions using various spectroscopic techniques such UV–visible, FTIR, and confocal Raman spectroscopies. Additionally, we studied surface morphology of the polymer-IL film. Spectroscopic studies show that both families of ILs can interact with the newly synthesized polymer poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole). However, the imidazolium-family Ionic Liquid-polymer (IL-polymer) mixture films show higher conductivities than ammonium-family IL–polymer mixture films.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

Effects of gamma irradiation on morphological changes and biological responses in plants

This review discusses the morphological changes and biological responses of plants irradiated with gamma rays. Seedlings exposed to relatively low doses of gamma rays (1-5 Gy) developed normally, while the growth of plants irradiated with a high dose gamma ray (50 Gy) was significantly inhibited. Based on TEM observations, chloroplasts were extremely sensitive to gamma irradiation compared to other cell organelles, particularly thylakoids being heavily swollen. In addition, some portions of the mitochondria and endoplasmic reticulum were structurally altered, for example, distortion and swelling. The cerium perhydroxide deposition, as a maker for H(2)O(2) deposition, was typically manifest on the plasma membranes and cell walls of the tissues from both the control and irradiated plants. However, the intensities of cerium perhydroxide deposits (CPDs) were remarkably increased in the plasma membranes and cell walls of pumpkin tissues such as petiole, cotyledon, hypocotyl and especially leaf after gamma irradiation. These observations are in good agreement with the results of H(2)O(2) content in all tissues. The immuno-localization analysis for peroxidase (POD) on the tissues from pumpkin plant showed the same pattern between the control and irradiated plants, but the density of gold particles as indication of POD localization was significantly increased on the cell corner middle lamellae of parenchyma cells, especially in the petiole after gamma irradiation. However, accumulation and localization of H(2)O(2) and POD in vessels were not significantly different between both plants. The accumulation and localization of both H(2)O(2) and POD were differentially affected by gamma irradiation depending on the different tissue types. The deposition of both H(2)O(2) and POD in parenchyma cells appeared much higher than in vessels, suggesting that the former is more sensitive than the latter against gamma rays.     

Knockdown of 14-3-3ζ enhances radiosensitivity and radio-induced apoptosis in CD133+ liver cancer stem cells

14-3-3ζ is related to many cancer survival cellular processes. In a previous study, we showed that silencing 14-3-3ζ decreases the resistance of hepatocellular carcinoma (HCC) to chemotherapy. In this study, we investigated whether silencing 14-3-3ζ affects the radioresistance of cancer stem-like cells (CSCs) in HCC. Knockdown of 14-3-3ζ decreased cell viability and the number of spheres by reducing radioresistance in CSCs after γ-irradiation (IR). Furthermore, the levels of pro-apoptotic proteins were upregulated in CSCs via silencing 14-3-3ζ after IR. These results suggest that 14-3-3ζ knockdown enhances radio-induced apoptosis by reducing radioresistance in liver CSCs.     

Visible‐Light Sensitization of Vinyl Azides by Transition‐Metal Photocatalysis

Irradiation of vinyl and aryl azides with visible light in the presence of Ru photocatalysts results in the formation of reactive nitrenes, which can undergo a variety of C? N bond‐forming reactions. The ability to use low‐energy visible light instead of UV in the photochemical activation of azides avoids competitive photodecomposition processes that have long been a significant limitation on the synthetic use of these reactions.