Elemental analysis of Korean women’s blood serums using instrumental neutron activation analysis

Instrumental neutron activation analysis was used to assess the concentration of the inorganic trace elements in Korean women’s blood serums. It was found that a high concentration of Na and Cl incurs an analytical interference, but the 12 elements such as Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn could be determined under the condition of an interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for quality control. The average values of the Na and Cl determined in the serum samples were 3,365 and 3,533 mg/l, Ca was 96.4 mg/l and K was 191 mg/l. Besides, Br, Se and Zn have a concentration level of 6.46, 0.13 and 0.98 mg/l, respectively. It was found that there is no significant difference between the present values and the reported values.     

First preparation of biotinylated gradient polyethylene surface to bind photoactive caged streptavidin

A gradient polyethylene (PE) surface was created through corona treatment, in which the corona power increased along the 5 cm length of the PE. The gradient surface was treated with polyethyleneimine and then biotin. Fluorescein-conjugated streptavidin (SAV) caged within 5-carboxymethoxy-2-nitrobenzyl (CMNB) adsorbed onto the biotinylated gradient PE surface following molecular recognition principles. Photoirradiation decomposed the CMNB cage and allowed the fluorescein-conjugated SAV to fluoresce, the intensity of which increased gradually along the PE surface.     

Relationship between microhardness and fluorine contents on tooth enamel determined by PIGE analysis

The remineralization effect of fluoride has been measured by surface microhardness on tooth enamel. The purpose of this study was to investigate the relationship between microhardness and fluorine concentration on tooth enamel. Twelve sound bovine enamel specimens were prepared and immersed in 0.05% NaF solution for 1, 3, 6, 24 and 36 hours, respectively. The concentration of fluorine in specimens were measured by PIGE analysis and surface microhardness of each specimen was measured by surface microhardness tester. Fluorine concentration was increased by immersing time. There was no change in microhardness of each specimen by fluorine content. The results of this study suggest that there was no relationship between the fluorine concentration and surface microhardness in sound tooth enamel. PIGE analysis can be used effectively to assess the remineralization effect of fluorine content in tooth enamel.     

Purification of a primary coolant in a nuclear power plant using a magnetic filter - electrodeionization hybrid separation system

A magnetic filter — continuous electrodeionization (CEDI) hybrid separation system was investigated for the purification of the primary coolant in a nuclear power plant. A magnetic filter system with a 3000 Gauss magnetic field and a CEDI system with a cell consisting of 3 compartments were used for the removal of magnetite and nickel ions, respectively. The hybrid separation system achieved removal rates of 98% for magnetite and 99% for the nickel ions demonstrating its feasibility for the purification of primary coolant.The authors gratefully acknowledge the Basic Atomic Energy Research Institute (BAERI) program at the Korea Institute of Science and Technology Evaluation and Planning (KISTEP) for the financial support to carry out this work.     

The outer-distance of nodes in random trees

The outer-distance of a nodeu in a rooted treeT _n is the height of the subtree determined byu and all nodesv such thatu is on the path joiningv and the root ofT. We show that the expected outer-distance of nodes of treesT _n in certain families is asymptotic toB logn where the constantB depends on .     

Photodissociation tandem mass spectrometry at 266 nm of an aliphatic peptide derivatized with phenyl isothiocyanate and 4-sulfophenyl isothiocyanate

Photodissociation (PD) tandem mass spectra have been obtained at 266 nm for the protonated molecules of a tryptic peptide, ASHLGLAR, and of its phenyl isothiocyanate and 4-sulfophenyl isothiocyanate derivatives, generated by matrix-assisted laser desorption/ionization. Derivatization with the aromatic chromophores greatly reduced the intensity of the laser required for efficient PD. Major fragment ions observed in the three spectra are quite similar. General features of the PD tandem mass spectra and their potential utility for analytical purposes are discussed.     

Pretreatment of swine wastewater using anaerobic filter

Efforts were made to assess the efficiency of an anaerobic filter packed with porous floating ceramic media and to identify the optimum operational condition of anaerobic filter as a pretreatment of swine wastewater for the subsequent biological removal of nitrogen and phosphorus. A stepwise decrease in hydraulic retention time (HRT) and an increase in organic loading rate (OLR) were utilized in an anaerobic filter reactor at mesophilic temperature (35°C). The optimum operating condition of the anaerobic filter was found to be at an HRT of 1 d. A soluble chemical oxygen demand (COD) removal efficiency of 62% and a total suspended solids removal efficiency of 39% at an HRT of 1 d were achieved with an OLR of 16.0 kg total COD/(m³·d), respectively. The maximum methane production rate approached 1.70 vol of biogas produced per volume of reactor per day at an HRT of 1 d. It was likely that the effluent COD/total Kjeldahl nitrogen ratio, of 22, the COD/total phosphorous ratio of 47, and the high effluent alkalinity >2500 mg/L as CaCO₃ of the anaerobic filter operated at an HRT of 1 d was adequate for the subsequent biological removal of nitrogen and phosphorus.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

Dual-purpose sample trap for on-line strong cation-exchange chromatography/reversed-phase liquid chromatography/tandem mass spectrometry for shotgun proteomics. Application to the human Jurkat T-cell proteome

A dual-purpose sample-trapping column is introduced for the capacity enhancement of proteome analysis in on-line two-dimensional nanoflow liquid chromatography (strong cation-exchange chromatography followed by reversed-phase liquid chromatography) and tandem mass spectrometry. A home-made dual trap is prepared by sequentially packing C18 reversed-phase (RP) particles and SCX resin in a silica capillary tubing (1.5 cm x 200 microm I.D. for SCX, 0.7 cm x 200 microm for RP) ended with a home-made frit and is connected to a nanoflow column having a pulled tip treated with an end frit. Without having a separate fraction collection and concentration process, digested peptide mixtures were loaded directly in the SCX part of the dual trap, and the SCX separation of peptides was performed with a salt step elution initiated by injecting only 8 microL of NH4HCO3 solution from the autosampler to the dual trap. The fractionated peptides at each salt step were directly transferred to the RP trap packed right next to the SCX part for desalting, and a nanoflow LC-MS-MS run was followed. During the sample loading-SCX fractionation-desalting, flow direction was set to bypass the analytical column to prevent contamination. The entire 2D-LC separation and MS-MS analysis were automated. Evaluation of the technique was made with an injection of 15 microg peptide mixtures from human Jurkat T-cell proteome, and the total seven salt step cycles followed by each RPLC run resulted in an identification of 681 proteins.     

High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.