Host-guest-driven copolymerization of tetraphosphonate cavitands

The outstanding complexing properties of tetraphosphonate cavitands towards N‐methylpyridinium salts were exploited to realise a new class of linear and cyclic AABB supramolecular polymers through host–guest interactions. The effectiveness of the selected self‐association processes was tested by ¹H NMR studies, whereas microcalorimetric analyses clarified the binding thermodynamics and revealed the possibility of tuning entropic contributions by acting on the flexibility of the guest linker. Although the formation of linear polymeric chains for a rigid system was demonstrated by X‐ray analysis, the presence of a concentration‐dependent ring–chain equilibrium was indicated by solution viscosity measurements in the case of a very flexible ditopic BB guest co‐monomer.     

Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance

Anode-supported solid oxide fuel cells (SOFCs) based on thin BaZr_0.8Y_0.2O_3 ? δ (BZY) electrolyte films were fabricated by pulsed laser deposition (PLD) on sintered NiO–BZY composite anodes. After in situ reduction of NiO to Ni, the anode substrates became porous, while retaining good adhesion with the electrolyte. A slurry-coated composite cathode made of La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ (LSCF) and BaCe_0.9Yb_0.1O_3 ? δ (BCYb), specifically developed for proton conducting electrolytes, was used to assemble fuel cell prototypes. Depositing by PLD 100 nm thick LSCF porous films onto the BZY thin films was essential to improve the cathode/electrolyte adhesion. A power density output of 110 mW/cm² at 600 °C, the largest reported value for an anode-supported fuel cell based on BZY at this temperature, was achieved. Electrochemical impedance spectroscopy (EIS) measurements were used to investigate the different contributions to the total polarization losses.     

A Mountain Pass-type Theorem for Vector-valued Functions

The mountain pass theorem for scalar functionals is a fundamental result of the minimax methods in variational analysis. In this work we extend this theorem to the class of \(\mathcal{C}^{1}\) functions \(f:\mathbb{R}^{n}\rightarrow\mathbb{R}^{m}\), where the image space is ordered by the nonnegative orthant \(\mathbb{R}_{+}^{m}\). Under suitable geometrical assumptions, we prove the existence of a critical point of f and we localize this point as a solution of a minimax problem. We remark that the considered minimax problem consists of an inner vector maximization problem and of an outer set-valued minimization problem. To deal with the outer set-valued problem we use an ordering relation among subsets of \(\mathbb{R}^{m}\) introduced by Kuroiwa. In order to prove our result, we develop an Ekeland-type principle for set-valued maps and we extensively use the notion of vector pseudogradient.     

Lateral IBIC characterization of single crystal synthetic diamond detectors

In order to evaluate the charge collection efficiency (CCE) profile of single‐crystal diamond devices based on a p‐type/intrinsic/metal configuration, a lateral Ion Beam Induced Charge (IBIC) analysis was performed over their cleaved cross sections using a 2 MeV proton microbeam. CCE profiles in the depth direction were extracted from the cross‐sectional maps at variable bias voltage. IBIC spectra relevant to the depletion region extending beneath the frontal Schottky electrode show a 100% CCE, with a spectral resolution of about 1.5%. The dependence of the width of the high efficiency region from applied bias voltage allows the constant residual doping concentration of the active region to be evaluated. The region where the electric field is absent shows an exponentially decreasing CCE profile, from which it is possible to estimate the diffusion length of the minority carriers by means of a drift–diffusion model. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Tailoring mixed proton-electronic conductivity of BaZrO3 by Y and Pr co-doping for cathode application in protonic SOFCs

BaZr_0.8 − xPr_xY_0.2O_3 − δ (BZPYx, 0.1 ≤ x ≤ 0.4) perovskite oxides were investigated for application as cathode materials for intermediate temperature solid oxide fuel cells based on proton conducting electrolytes (protonic-SOFCs). The BZPYx reactivity with CO₂ and water vapor was evaluated by thermogravimetric and X-ray diffraction analyses, and good chemical stability was observed for each BZPYx composition. Conductivity measurements of BZPYx sintered pellets were performed as a function of temperature and p_O2 in humidified atmospheres, corresponding to cathode operating condition in protonic-SOFCs. Different conductivity values and activation energies were measured depending on the Pr content, suggesting the presence of different charge carriers. For all the compositions, the partial electronic conductivity, calculated from conductivity measurements at different p_O2, increased with increasing the temperature from 500 to 700 °C. Furthermore, the larger the Pr content, the larger the electronic conductivity. BaZr_0.7Pr_0.1Y_0.2O_3 − δ and BaZr_0.4Pr_0.4Y_0.2O_3 − δ showed mostly pure proton and electron conductivity, respectively, whereas the intermediate compositions showed mixed proton/electronic conductivity. Among the two mixed proton/electronic conductors, BaZr_0.6Pr_0.3Y_0.2O_3 − δ presented the larger conductivity, which coupled with its good chemical stability, makes this perovskite oxide a candidate cathode materials for protonic-SOFCs.     

Cauchy problem for effectively hyperbolic operators with triple characteristics

We study a class of third-order effectively hyperbolic operators P   in G={(t,x):0?t?T,x∈U?Rⁿ}$G=\{(t,x):0?t?T,x\in U?{\mathbb{R}}^n\}$ with triple characteristics at ρ=(0,x₀,ξ),ξ∈Rⁿ?{0}$\rho =(0,x_0,\xi ),\xi \in {\mathbb{R}}^n?\{0\}$. V. Ivrii introduced the conjecture that every effectively hyperbolic operator is strongly hyperbolic  , that is the Cauchy problem for P+Q$P+Q$ is locally well posed for any lower-order terms Q. For operators with triple characteristics, this conjecture was established [3] in the case when the principal symbol of P admits a factorization as a product of two symbols of principal type. A strongly hyperbolic operator in G could have triple characteristics in G   only for t=0$t=0$ or for t=T$t=T$. The operators that we investigate have a principal symbol which in general is not factorizable and we prove that these operators are strongly hyperbolic if T is small enough.     

Twist points of planar domains

We establish a potential theoretic approach to the study of twist points in the boundary of simply connected planar domains.

     

Unraveling the dynamics of the C(3P,1D) + C2H2 reactions by the crossed molecular beam scattering technique

A detailed investigation of the dynamics of the reactions of ground- and excited-state carbon atoms, C(3P) and C(1D), with acetylene is reported over a wide collision energy range (3.6-49.1 kJ mol-1) using the crossed molecular beam (CMB) scattering technique with electron ionization mass spectrometric detection and time-of-flight (TOF) analysis. We have exploited the capability of (a) generating continuous intense supersonic beams of C(3P, 1D), (b) crossing the two reactant beams at different intersection angles (45, 90, and 135 degrees ) to attain a wide range of collision energies, and (c) tuning the energy of the ionizing electrons to low values (soft ionization) to suppress interferences from dissociative ionization processes. From angular and TOF distribution measurements of products at m/z=37 and 36, the primary reaction products of the C(3P) and C(1D) reactions with C2H2 have been identified to be cyclic (c)-C3H + H, linear (l)-C3H + H, and C3 + H2. From the data analysis, product angular and translational energy distributions in the center-of-mass (CM) system for both the linear and cyclic C3H isomers as well as the C3 product from C(3P) and for l/c-C3H and C3 from C(1D) have been derived as a function of collision energy from 3.6 to 49.1 kJ mol-1. The cyclic/linear C3H ratio and the C3/(C3 + c/l-C3H) branching ratios for the C(3P) reaction have been determined as a function of collision energy. The present findings have been compared with those from previous CMB studies using pulsed beams; here, a marked contrast is noted in the CM angular distributions for both C3H- and C3-forming channels from C(3P) and their trend with collision energy. Consequently, the interpretation of the reaction dynamics derived in the present work contradicts that previously proposed from the pulsed CMB studies. The results have been discussed in the light of the available theoretical information on the relevant triplet and singlet C3H2 ab initio potential energy surfaces (PESs). In particular, the branching ratios for the C(3P) + C2H2 reaction have been compared with the available theoretical predictions (approximate quantum scattering calculations and quasiclassical trajectory calculations on ab initio triplet PESs and, very recent, statistical calculations on ab initio triplet PESs as well as on ab initio triplet/singlet PESs including nonadiabatic effects, that is, intersystem crossing). While the experimental branching ratios have been corroborated by the statistical predictions, strong disagreement has been found with the results of the dynamical calculations. The astrophysical implications of the present results have been noted.