Oxygen-assisted shape control in polyol synthesis of silver nanocrystals

We have found that the shape of silver nanocrystals is conveniently controlled by injection of oxygen gas during the polyol reduction of silver ions. The presence of oxygen effectively promotes the oxidative etching of multiple twined particles. Adjusting the flow rate of the oxygen gas yields uniformly-sized silver nanocubes, right bipyramids, nanowires, and spherical nanoparticles depending on the injection rate of the oxygen gas. Electron diffraction and high resolution TEM observations of the synthesized nanocrystals show our nanocrystals do consist of silver, not of silver oxide. SERS activities of the synthesized nanocrystals were also examined.     

Anionic alternating copolymerization behavior of bifunctional six‐membered lactone and glycidyl phenyl ether

A copolymerization of 10‐methyl‐2H,8H‐benzo‐[1,2‐b:5,4‐b′]bipyran‐2,8‐dione ( 1 ) and glycidyl phenyl ether (GPE) was studied. 1 was a bislactone designed as a bifunctional analogue of 3,4‐dihydrocoumarin (DHCM), of which anionic 1:1 alternating copolymerization with GPE has been reported by us, previously. This alternating nature was inherited by the present copolymerization of 1 and GPE, leading to an intriguing copolymerization behavior in contrast to the ordinary statistical copolymerizations of monofunctional monomers and bifunctional monomers usually controlled by the proportional dependence of the crosslinking density on the monomer feed ratio: (1) When the feed ratio [GPE]₀/[ 1 ]₀ was 1, the two monomers underwent the 1:1 alternating copolymerization. In this case, 1 behaved as a monofunctional monomer, that is, only one of the two lactones in 1 participated in the copolymerization allowing the other lactone moiety to be introduced into the side chain almost quantitatively. (2) Increasing the feed ratio [GPE]₀/[1]₀ to larger than 4 allowed almost all of the lactone moieties to participate in the copolymerization system to give the corresponding networked polymers efficiently. The compositions of the copolymers [GPE unit]/[ 1 ‐derived acyclic ester unit] were always biased to smaller values than the feed ratios [GPE]₀/[lactone moiety in 1 ]₀ by the intrinsic 1:1 alternating nature of the copolymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3662–3668, 2009     

Surface cleaning of germanium nanodot ionization substrate for surface‐assisted laser desorption/ionization mass spectrometry

In surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS), a chemical background signal, arising from organic contaminants such as plasticizers, is frequently observed mainly under m/z ca. 600, which impairs the advantages of the matrix‐free approach. Silver salts, which are used for the cationization of aromatic compounds, are also difficult to remove completely after the measurements. In this study, surface cleaning techniques used in semiconductor processing were used to clean our developed silicon‐based SALDI substrate on which self‐assembled germanium nanodots (GeNDs) had been deposited (termed a GeND chip). An immersion cleaning method using acetone with sonication, and a sulfuric‐peroxide mixture (SPM) cleaning method using a mixture of H₂SO₄/H₂O₂/deionized water, were examined for their effectiveness in removing organic compounds and residual silver salts. Removal of both types of contaminants was successfully performed by SPM cleaning. The limit of detection for glutathione was improved from ca. 5 pmol without cleaning to ca. 50 fmol after the SPM cleaning. Since GeND chips can tolerate acidic cleaning and sonication due to their chemical inertness and rigid nanodot structures, they appear to be an ideal reusable SALDI substrate. Copyright © 2009 John Wiley & Sons, Ltd.     

Analysis of red phosphorus in resins using pyrolysis-gas chromatography/mass spectrometry.

Although red phosphorus is used as a flame retardant for polymer materials, no analysis methods for it in resins has been established. Analysis methods for red phosphorus in resins were investigated using pyrolysis-gas chromatograpy/mass spectrometry (Py-GC/MS) by paying attention to the fact that it has a sublimation property. We found that the mass spectrum of red phosphorus shows a series of ions at m/z=62, 93 and 124, and a fragment pattern indicating that red phosphorus (P4=124, P=31) was pyrolytically decomposed. The coefficient of the correlation between the content of red phosphorus in the resin and the peak intensity in Py-GC/MS was 0.9781. The relative standard deviations of this analysis method was 6.29% (n=5). Py-GC/MS was applicable not only to qualitative analysis but also to the quantitative analysis of red phosphorus.     

Development of 1,3a,6a-triazapentalene-labeled enterobactin as a fluorescence quenching sensor of iron ion

1,3a,6a-Triazapentalene (TAP)-labeled enterobactin was developed as an iron ion sensor. 3-Acetylated-TAP was successfully introduced to the catechol ring of enterobactin, a well-recognized siderophore secreted by various Gram-negative bacteria. The fluorescence of TAP-labeled enterobactin decreased gradually as the amount of Fe³⁺ ion as an additive was increased, and 1.2 equiv of Fe³⁺ ion completely quenched the fluorescence. In clear contrast, when other metal ions were used, the fluorescence of TAP-labeled enterobactin remained even at 5.0 equiv.     

Trans-selective γ-arylation of macrocyclic N-picolinoylcycloalkylamines through palladium-catalyzed methylene sp3 carbon–hydrogen bond activation

While numerous stereoselective methylene β- and γ-carbon–hydrogen activation reactions are reported, there are no examples of trans-selective γ-carbon–hydrogen activation of cyclic compounds. Herein I report the first trans-selective palladium-catalyzed γ-arylation of N-picolinoylcycloalkylamine with aryl iodides. Trans-arylation of macrocyclic N-picolinoylcyclododecylamine proceeded to give trans-3-aryl-N-picolinoylcyclododecylamine as a sole mono-arylated product in up to 85% yield. Other, larger substrates were also applicable to trans-arylation, albeit with lower efficiency. The picolinoyl group of the trans-arylated product was easily removed with zinc and diluted hydrochloric acid.