Characterization of AZ91D Granules Covered with a Flux during In‐Situ Melting

Oxidation and melting behaviors of AZ91D granules throughout the in‐situ melting process using flux were investigated. The granules were heated under unprotected environment at four different temperatures between 650 and 800 °C, for the durations of 30 and 60 min. The products of heating process were characterized macroscopically and the oxides formed on the granules were examined using field emission scanning electron microscope, energy dispersive X‐ray spectroscopy and X‐ray diffraction analysis. Thermal analysis was used to reveal the response of the granules to heating during the in‐situ melting. The results showed that the granules experienced severe oxidation even in the presence of the flux, and significant amount of them changed to a powdered state due to oxidation and combustion, especially at 800 °C. It was discovered that the granules melted during heating; however, oxides formed on their surface encapsulated the molten metal and prevented the liquids from merging. The results also revealed that increasing heating temperature and time enhanced mold‐magnesium reaction resulted in the entrance of mold materials into the oxidation residues.     

AC conductivity and dielectric behavior of bulk Furfurylidenemalononitrile

AC conductivity and dielectric behavior for bulk Furfurylidenemalononitrile have been studied over a temperature range (293–333 K) and frequency range (50–5×10⁶ Hz). The frequency dependence of ac conductivity, σ_ac, has been investigated by the universal power law, σ_ac(ω)=Aω^s. The variation of the frequency exponent (s) with temperature was analyzed in terms of different conduction mechanisms, and it was found that the correlated barrier hopping (CBH) model is the predominant conduction mechanism. The temperature dependence of σ_ac(ω) showed a linear increase with the increase in temperature at different frequencies. The ac activation energy was determined at different frequencies. Dielectric data were analyzed using complex permittivity and complex electric modulus for bulk Furfurylidenemalononitrile at various temperatures.     

Tri-polarized spectrum sensing based on an experimental outdoor-to-indoor cognitive-radio scenario

Compared to classical spatially separated multiple antenna system, cross-polarized co-located antenna systems are an interesting way to reduce equipment size while reducing the inter-antenna correlation. In this paper the spectrum sensing of a Cognitive Radio (CR) system taking advantage of polarization diversity under Rayleigh fading is investigated and compared to an equivalent system using spatial diversity. This analysis is based on a theoretical formulation applied to a real-world scenario. For this purpose, an outdoor-to-indoor measurement campaign at a frequency of 3.5 GHz is realized, where an indoor secondary user senses the signals received from an outdoor primary base station. The signals received at each antenna are first combined and then applied to an energy detector. The theoretical expressions are simulated in the measurement context. The detection probability behavior as a function of distance between the Primary Transmitter (PTx) and the Secondary Terminal (STE) and the inter-antenna correlation effect on the sensing performance are studied.     

Prospects of inflation with perturbed throat geometry

We study brane inflation in a warped deformed conifold background that includes general possible corrections to the throat geometry sourced by coupling to the bulk of a compact Calabi–Yau space. We focus specifically, on the perturbation by chiral operator of dimension 3/2 in the CFT. We find that the effective potential in this case can give rise to required number of e-foldings and the spectral index nS$n_S$ consistent with observation. The tensor to scalar ratio of perturbations is generally very low in this scenario. The COBE normalization, however, poses certain difficulties which can be circumvented provided model parameters are properly fine tuned. We find the numerical values of parameters which can give rise to enough inflation, observationally consistent values of density perturbations, scalar to tensor ratio of perturbations and the spectral index nS$n_S$.     

Synthesis and characterization of Ni(II) complex functionalized silica-based magnetic nanocatalyst and its application in C–N and C–C cross-coupling reactions

Molecular Diversity - A new magnetically recoverable silica-based nickel(II) nanocatalyst was synthesized by a simple cost-effective procedure, which was characterized by TEM, SEM, XRD, VSM...     

Thermodynamic description of the viscosity of liquid solder alloys with minor Co impurities

Because of the increasing complexity and cost of experiments carried out, the data for the multi-component alloy systems have frequently been obtained by numerical modelling. It is clear that the related calculations require reliable data dealing with the pure components and binary alloy systems. Selecting the reliable data concerning the pure components from the literature, the viscosities for the SAC and (SAC)_1?x Co_x solder alloys have been calculated using different viscosity models (geometric and physical). The viscosity decreases as the amount of tin content increases in the SAC387 alloy while the addition of the cobalt to SAC387 solder results in the increasing of the viscosity. Moreover, by computing the root mean square values between theoretical and experimental viscosities, it can be concluded that the lowest value among all models is that of obtained by Kaptay equation.     

Study of the critical current density and the thermodynamic critical field in deuterated κ-(BEDT-TTF)2Cu[N(CN)2]Br organic superconductor

ABSTRACT

We have studied the reversible and irreversible part of the hysteresis loops as a function of slow cooling rate through the order–disorder transformation near 80?K for the deuterated (κ-D₈-Br) κ-(BEDT-TTF)₂Cu[N(CN)₂]Br organic superconductor. We estimated the critical current density J_C and the thermodynamic critical field H_C from the magnetic hysteresis loops. Temperature dependence of the critical current density derived from the irreversible part using Bean’s model. The thermodynamic critical field H_C has been obtained from the reversible part of the hysteresis loops.     

Sulphur and oxygen isotopic characters of dissolved sulphate in groundwater from the Pleistocene aquifer in the southern Jordan Valley (Jericho area,Palestine)

Sulphate and chloride concentrations in the shallow Pleistocene aquifer systems in the lower Jordan valley area indicate a general trend of increasing salinity eastward and southward. This study was conducted in one of the important sub-basins feeding the Pleo–Pleistocene aquifer in the Jericho area in the southern part of the valley using S and O isotopes of dissolved sulphate. The results show that sulphate has mainly two contributions to the groundwater. One is the surface seepage, which is present as a salty leachate form with the positive δ³⁴S_sulphate values of primary gypsum in Lisan and Samara formations, and the second is the upwelling saline water which was in contact with a deep secondary gypsum, aragonites and salty rocks and rose up under heavy abstraction with depleted ³⁴S in sulphate and relatively high sulphate and chloride content. The latest was clearly shown in the Arab Project wells to the east that is undergoing a continuous heavy abstraction. The isotopic signatures of S and O in these wells to the east show that this depleted ³⁴S and highly concentrated sulphate might also indicate a dissolved sulphate originating from pyrite oxidation that results from the interaction with a pyrite-rich aquifer, which can well up with salty water under heavy abstraction and is oxidised in the upper aerobic shallow aquifer.     

An inverse design approach for magnetic lenses operated under infinite magnification condition

A theoretical-computational investigation has been carried out to describe a synthesis optimization procedure of asymmetrical magnetic lenses with the aid of numerical analysis methods. Where a certain mathematical form for the electron beam is proposed to be a target function. This function has several optimization parameters where the influence of each of them, when the other ones kept fixed, is investigated. Results have clearly shown that some of the optimization parameters have a considerable effect on the first order properties, third order aberrations and the reconstructed polepieces. While the others have no significant influence on these physical and geometrical properties. Furthermore, the results obviously show that there is an excellent ability for producing a conventional magnetic field for the double polepieces lenses.     

Electrical field analysis of metal‐surface plasmon resonance using a biaxially strained Si substrate

Electrical field components of metal‐surface plasmon resonance were analyzed in detail. Both longitudinal optical (LO) and transverse optical (TO) phonon modes of a biaxially strained Si layer can be excited by surface‐enhanced Raman spectroscopy (SERS). The z to y polarization ratio in SERS measurements was calculated to be 0.78 using the intensity ratio of TO to LO phonon modes. The electrical field components of SERS were also calculated by the finite‐difference time‐domain method. Copyright © 2014 John Wiley & Sons, Ltd.