Tetrabutylammonium bromide media aza-Michael addition of 1,2,3,6-tetrahydrophthalimide to symmetrical fumaric esters and acrylic esters under solvent-free conditions

The aza-Michael addition of 1,2,3,6-tetrahydrophthalimide with symmetrical fumaric esters has been performed efficiently in a solvent-free system at 100 °C and using 1,4-diazabicyclo[2.2.2]octane (DABCO) as a base in the presence of tetrabutylammonium bromide (TBAB). The products were obtained in good to high yields within 2.5-7.0 h. This reaction worked well on linear alkyl fumarates and was not effective with nonlinear alkyl fumarates. Although the reaction was also applicable to acrylates such as n-butyl acrylate, methacrylates and crotonates were not suitable Michael acceptors for this reaction.     

Influence of population and radius of cavity bubbles on size of sodium chloride crystals in ultrasound ablation

Crystal size distribution as a function of power in ultrasound ablation is simulated by using a theoretical method based on population and radius of bubbles. In this method, population and radius of bubbles are related to ultrasound power and Debye temperature of crystals. The best power for production of crystals with uniform size is obtained from the theory. In addition, it is shown that the population of bubbles effects the radius of the productions and the radius of bubbles influences the population of products. Results from the theory are supported by experimental results.     

Static and dynamic stability modeling of a capacitive FGM micro-beam in presence of temperature changes

Stability of a functionally graded (FG) micro-beam, based on modified couple stress theory (MCST), subjected to nonlinear electrostatic pressure and thermal changes regarding convection and radiation, is the main purpose of this paper. It is assumed that the functionally graded beam, made of metal and ceramic, follows the volume fraction definition and law of mixtures, and its properties change as an exponential function through its thickness. By changing the ceramic constituent percent of the bottom surface, five different types of the micro-beams are investigated. The static pull-in voltages in presence of temperature changes are obtained by using step-by-step linearization method (SSLM) and, by adapting Runge–Kutta approach, the dynamic pull-in voltages are obtained numerically. Though the temperature distribution through the thickness of FG micro-beam (due to its too small measurement) is considered uniform, owing to the different thermal expansions of layers, temperature changes cause deflection in the micro-beam, and consequently affect pull-in values. Hence the profound effects of different material constituent over the pull-in voltages are illustrated and it is graphically displayed that how in some cases neglecting components of the couple stress leads to inaccurate results.     

Efficient Synthesis and Antibacterial Activities of Some Novel 1,2,3‐Triazoles Prepared from Propargylic Alcohols and Benzyl Azides

A simple and effective procedure for regioselective preparation of 1,2,3‐triazoles from benzyl azides and propargylic alcohols is described using CuSO₄.5H₂O and sodium ascorbate. To screen the antibacterial activity of some newly synthesized triazole derivatives, minimum inhibitory concentration of 3d and 3k was evaluated against gram positive Staphylococcus aureus and Bacillus subtilis and gram negative Escherichia coli and Pseudomonas aeruginosa.     

A General Strategy for Site‐Directed Enzyme Immobilization by Using NiO Nanoparticle Decorated Mesoporous Silica

Mesoporous materials have recently gained much attention owing to their large surface area, narrow pore size distribution, and superior pore structure. These materials have been demonstrated as excellent solid supports for immobilization of a variety of proteins and enzymes for their potential applications as biocatalysts in the chemical and pharmaceutical industries. However, the lack of efficient and reproducible methods for immobilization has limited the activity and recyclability of these biocatalysts. Furthermore, the biocatalysts are usually not robust owing to their rapid denaturation in bulk solvents. To solve these problems, we designed a novel hybrid material system, mesoporous silica immobilized with NiO nanoparticles (SBA‐NiO), wherein enzyme immobilization is directed to specific sites on the pore surface of the material. This yielded the biocatalytic species with higher activity than free enzyme in solution. These biocatalytic species are recyclable with minimal loss of activity after several cycles, demonstrating an advantage over free enzymes.     

Monolithic molecularly imprinted cryogel for lysozyme recognition

The application of molecularly imprinted polymers in the selective adsorption of macromolecules such as proteins by monolithic protein‐imprinted columns requires a macroporous structure, which can be provided by cryogelation at low temperature in which the formation of ice crystals gives a porous structure to the molecularly imprinted polymer. In this study, we applied this technique to synthesize lysozyme‐imprinted polyacrylamide cryogels containing 8% w/v of total monomers and 0.3% w/v of lysozyme. The synthesized cryogel was sponge‐like and elastic with very fast swelling and reshaping properties, showing a swelling ratio of 24.5 ± 3 and gel fraction yield of about 72%. It showed an imprinting effect of 1.58 and a separation factor of 1.37 for cytochrome c as the competing protein. Adsorption studies on the cryogel revealed that it follows the Langmuir isotherm, with a maximum theoretical adsorption capacity of 36.3 mg lysozyme per gram of cryogel. Additionally, it was shown that a salt‐free rebinding solution at low flow rate and pH = 7.0 is favorable for lysozyme rebinding. This kind of monolithic column promises a wide range of application in separation of various biomolecules due to its preparation simplicity, good rebinding characteristics, and macroporosity.     

Design Strategies and Applications of Tissue Bioadhesives

In the past two decades tissue adhesives and sealants have revolutionized bleeding control and wound healing. This paper focuses on existing tissue adhesive design, their structure, functioning mechanism, and their pros and cons in wound management. It also includes the latest advances in the development of new tissue adhesives as well as the emerging applications in regenerative medicine. We expect that this paper will provide insightful discussion on tissue bioadhesive design and lead to innovations for the development of the next generation of tissue bioadhesives and their related biomedical applications.

     

Production, nano-purification, radiolabeling and biodistribution study of [140Nd] 5,10,15,20-tetraphenylporphyrin complex as a possible imaging agent

[¹⁴⁰Nd] labeled 5,10,15,20-tetraphenylporphyrin ([¹⁴⁰Nd]-TPP) as a tumor–avid complex with a β-emitting radionuclide for evaluating its potential for target tumor therapy is reported. This complex was prepared using freshly prepared [¹⁴⁰Nd] NdCl₃ (purified by amino functionalized MCM-41 nano resin and commercial cation exchanger resins) and 5,10,15,20-tetraphenylporphyrin (H₂TPP).Stability of the complex was investigated in final formulation and human serum for 24 h and the partition coefficient was calculated. The biodistribution of the labeled compound in vital organs of Swiss mice bearing fibro sarcoma tumor was studied using scarification studies and positron emission tomography imaging up to 4 h.     

Diode laser absorption spectroscopy measurement of linestrengths and pressure broadening coefficients of the methane 2ν3 band at elevated temperatures

A diode laser sensor based on absorption spectroscopy has been developed for the measurement of spectroscopic parameters in the R (3) and R (4) manifolds of 2ν₃ band of CH₄. Individual linestrengths of each transition are determined for a range of temperatures. In addition, collision-broadened half-widths for CO₂, N₂, H₂O, CH₄, and CO collision partners are measured as a function of temperature and pressure for these strongly overlapped transitions. From this, temperature dependence of the collision half-width for each collision partner is determined. Using a new method for calculation of collisional broadening at high temperatures for strongly overlapped transitions makes these transitions accessible for spectroscopy.     

Simultaneous determination of some components in detergent washing powder by mid-infrared spectrometry and artificial neural network

A method has been established for simultaneous determination of sodium sulfate, sodium carbonate, and sodium tripolyphosphate in detergent washing powder samples based on attenuated total reflectance Fourier transform IR spectrometry in the mid-IR spectral region (800-1550 cm(-1)). Genetic algorithm (GA) wavelength selection followed by feed forward back-propagation artificial neural network (BP-ANN) was the chemometric approach. Root mean square error of prediction for BP-ANN and GA-BP-ANN was 0.0051 and 0.0048, respectively. The proposed method is simple, with no tedious pretreatment step, for simultaneous determination of the above-mentioned components in commercial washing powder samples.