Improvement in gas separation properties of a polymeric membrane through the incorporation of inorganic nano‐particles

The present work tries to introduce a high‐performance nano‐composite membrane by using polydimethylsiloxane (PDMS) as its main polymer matrix to meet some specific requirements in industrial gas separations. Different nano‐composite membranes were synthesized by incorporating various amounts of nano‐sized silica particles into the PDMS matrix. A uniform dispersion of nano‐particles in the host membranes was obtained. The nano‐composite membranes were characterized morphologically by scanning electron microscopy and atomic force microscopy. Separation properties, permeability, and ideal selectivity of C₃H₈, CH₄, and H₂ through the synthesized nano‐composite membranes with different nano‐particle contents (0.5, 1, 1.5, 2, 2.5, and 3 wt%) were investigated at different pressures (2, 3, 4, 5, 6, and 7 atm) and constant temperature (35°C). It was found out that a 2 wt% loading of nano‐particles into the PDMS matrix is optimal to obtain the best separation performance. Afterwards, sorption experiments for the synthesized nano‐composite membranes were carried out, and diffusion coefficients of the gases were calculated based on solution‐diffusion mechanism. Gas permeation and sorption experiments showed an increase in sorption and a decrease in diffusion coefficients of the gases through the nano‐composite membranes by adding nano‐particles into the host polymer matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis of shock wave reflection from fixed and moving boundaries using a stabilized particle method

In the present paper, the efficiency of an enhanced formulation of the stabilized corrective smoothed particle method （CSPM） for simulation of shock wave propagation and reflection from fixed and moving solid boundaries in compressible fluids is investigated. The Lagrangian nature and its accuracy for imposing the boundary conditions are the two main reasons for adoption of CSPM. The governing equations are further modified for imposition of moving solid boundary conditions. In addition to the traditional artificial viscosity, which can remove numerically induced abnormal jumps in the field values, a velocity field smoothing technique is introduced as an efficient method for stabilizing the solution. The method has been implemented for one- and two-dimensional shock wave propagation and reflection from fixed and moving boundaries and the results have been compared with other available solutions. The method has also been adopted for simulation of shock wave propagation and reflection from infinite and finite solid boundaries.     

Study of Top Quark FCNC

We study the one-loop contribution of the effective flavor changing neutral couplings (FCNC) tcZ on the charm quark electric dipole moment. Using the known limits on the top and charm quarks electric dipole moments, we place limits on these FCNC anomalous couplings.     

Heavy Charged Gauge Bosons with General CP Violating Couplings

Heavy gauge bosons such as W＇ are expected to exist in many extensions of the Standard Model. In this paper, the most general Lagrangian for the interaction of W＇ with top and bottom quarks is considered. This Lagrangian consists of V- A and V ＋ A structure with in general complex couplings. Such interactions produce an Electric Dipole Moment （EDM） for the top quark at one loop level. We predict the allowed ranges for the mass and couplings of W＇ by using the upper limit on the top quark EDM.     

One‐pot three components synthesis of alkyl indeno [1,2‐b]‐quinoxalin‐11‐ylideneacetates in water and under solvent‐free conditions

We introduced a very simple, one‐pot three component procedure for preparation of alkyl indeno[1,2‐b]quinoxalin‐11‐ylideneacetates 4 from reaction of ninhydrin 1 , phenylenediamines 2 , (alkoxycarbonylmethyl)triphenylphosphonium bromides 3 , and sodium acetate in water and under solvent‐free conditions. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:549–552, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20136     

The electronic transport properties of defected bilayer sliding armchair graphene nanoribbons

By applying non-equilibrium Green's functions (NEGF) in combination with tight-binding (TB) model, we investigate and compare the electronic transport properties of perfect and defected bilayer armchair graphene nanoribbons (BAGNRs) under finite bias. Two typical defects which are placed in the middle of top layer (i.e. single vacancy (SV) and stone wale (SW) defects) are examined. The results reveal that in both perfect and defected bilayers, the maximum current refers to β-AB, AA and α-AB stacking orders, respectively, since the intermolecular interactions are stronger in them. Moreover it is observed that a SV decreases the current in all stacking orders, but the effects of a SW defect is nearly unpredictable. Besides, we introduced a sequential switching behavior and the effects of defects on the switching performance is studied as well. We found that a SW defect can significantly improve the switching behavior of a bilayer system. Transmission spectrum, band structure, molecular energy spectrum and molecular projected self-consistent Hamiltonian (MPSH) are analyzed subsequently to understand the electronic transport properties of these bilayer devices which can be used in developing nano-scale bilayer systems.     

Multicomponent reactions for the synthesis of new cyclopentadienephosphonate derivatives in water

A series of polysubstituted cyclopentadienephosphonate derivatives were synthesized via one-pot multicomponent reactions of primary amines and phosphites with activated acetylenic compounds in water as the solvent at room temperature.

Particularly valuable features of this method include high yields of products, broad substrate scope, short reaction time and a straightforward procedure.     

Comparison of the stability of thymine tautomers and the interaction of its tautomers with Na+, K+, Mg2+ and Ca2+ in gas and solvent phases

The present study compared the interactions among Na ⁺, K ⁺, Mg²⁺ and Ca²⁺, thymine and its tautomers in the gas and solvent phase, an interaction dependent upon the electronic construction of the tautomers. Three types of cation interaction with thymine and its tautomers were observed. In the first one, the metal cations interacted with a lone pair of nitrogen or oxygen of the tautomers. In the second type, there was an interaction among the cations, nitrogen and oxygen at the same time; the last one was that of cations with the electron density of thymine π-system, where the cations were perpendicular to the ring of thymine. The interaction of metals cation with tautomers was studied in the gas and solvent phases; a comparison was then made between interactions in two phases. The interaction energy for all complexes indicated the stability of complexes, an energy which was higher in Ca²⁺ and Mg²⁺ compared with Na⁺ and K⁺. Concerning K⁺ and Na⁺, the stability of all complexes of tautomers was greater than that of thymine complexes; however, the stability of certain Ca²⁺ and Mg²⁺ complexes was lower than the complexes of thymine.     

Dust ion-acoustic shock waves due to dust charge fluctuation in a superthermal dusty plasma

The nonlinear propagation of dust ion-acoustic (DIA) shock waves is studied in a charge varying dusty plasma with electrons having kappa velocity distribution. We use hot ions with equilibrium streaming speed and a fast superthermal electron charging current derived from orbit limited motion (OLM) theory. It is found that the presence of superthermal electrons does not only significantly modify the basic properties of shock waves, but also causes the existence of shock profile with only positive potential in such plasma with parameter ranges corresponding to Saturn?s rings. It is also shown that the strength and steepness of the shock waves decrease with increase of the size of dust grains and ion temperature.     

Pure annihilation decay of strange beauty meson into two charm heavy mesons

In this study, the heavy to heavy decay of \begin{document}$ B^0_s\rightarrow D^{*+}D^- $\end{document} is evaluated through the factorization approach by using the final state interaction as an effective correction. Under the factorization approach, this decay mode occurs only through the annihilation process, so a small amount is produced. Feynman's rules state that six meson pairs can be assumed for the intermediate states before the final meson pairs are produced. By taking into account the effects of twelve final state interaction diagrams in the calculations, a significant correction is obtained. These effects correct the value of the branching ratio obtained by the pure factorization approach from \begin{document}$ (2.41\pm1.37)\times10^{-5} $\end{document} to \begin{document}$ (8.27\pm2.23)\times10^{-5} $\end{document}. The value obtained for the branching ratio of the \begin{document}$ B^0_s\rightarrow D^{*+}D^- $\end{document} decay is consistent with the experimental results.