Time-stretch oscilloscope with dual-channel differential detection front end for monitoring of 100 Gb/s return-to-zero differential quadrature phase-shift keying data

Optical performance monitoring of high-capacity networks is one of the enabling technologies of future reconfigurable optical switch networks. In such networks, rapid performance evaluation of data streams becomes challenging due to the use of advanced modulation formats and high data rates. The time-stretch enhanced recording oscilloscope offers a potential solution to monitoring high-rate data in a practical time scale. Here we demonstrate an architecture with a differential detection front end for simultaneous I/Q data monitoring of a 100 gigabits/s return-to-zero differential quadrature phase-shift keying signal. This demonstration shows the potential of this technology for rapid performance monitoring of high-rate optical data streams that employ advanced modulation formats.     

Photonic temporal integration of broadband intensity waveforms over long operation time windows

We propose and experimentally demonstrate a novel design for temporal integration of microwave and optical intensity waveforms with combined high processing speed and a long operation time window. It is based on concatenating in series a discrete-time (low-speed) photonic integrator and a high-speed analog time-limited intensity integrator. This scheme is demonstrated here using a cascaded fiber-based interferometers' system (as a passive eight-point discrete-time integrator) and an analog time-limited intensity integrator. The latter is based on temporal intensity modulation of the input waveform with a rectangular-like incoherent energy spectrum followed by linear dispersion. Using this setup, we experimentally achieve accurate time integration of intensity signals with ~36 GHz bandwidths over an operation time window of ~4 ns, corresponding to a processing time-bandwidth product of >144.     

Numerical study of magnetic nanoparticles concentration in biofluid (blood) under influence of high gradient magnetic field

Ferrofluids are widely used in pharmaceutical industries as magnetic separation tools, anti-cancer drug carriers and micro-valve applications. The purpose of the current study is to investigate the effect of a magnetic field on the volume concentration of magnetic nanoparticles of a non-Newtonian biofluid (blood) as a drug carrier. The effect of particles on the flow field is considered. The governing non-linear differential equations, concentration and Naviar-stokes are coupled with the magnetic field. To solve these equations, a finite volume based code is developed and utilized. The results show accumulation of magnetic nanoparticles near the magnetic source until it looks like a solid object. The accumulation of nanoparticles is due to the magnetic force that overcomes the fluid drag force. As the magnetic strength and size of the magnetic particles increase, the accumulation of nanoparticles increases, as well. The magnetic susceptibility of particles also affects the flow field and the contour of the concentration considerably.     

Terahertz imaging through self-mixing in a quantum cascade laser

We demonstrate terahertz (THz) frequency imaging using a single quantum cascade laser (QCL) device for both generation and sensing of THz radiation. Detection is achieved by utilizing the effect of self-mixing in the THz QCL, and, specifically, by monitoring perturbations to the voltage across the QCL, induced by light reflected from an external object back into the laser cavity. Self-mixing imaging offers high sensitivity, a potentially fast response, and a simple, compact optical design, and we show that it can be used to obtain high-resolution reflection images of exemplar structures.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Effects of Cs treatment on field emission properties of capped carbon nanotubes

Within the methodology [M. Khazaei, A.A. Farajian, Y. Kawazoe, Phys. Rev. Lett. 95 (2005) 177602] based on first-principles electronic structure calculations, the effects of Cs treatment on current emissions and emission patterns of capped carbon nanotubes are considered at low deposition densities when the nanotubes are under an electric field 0.2 V/Å. The results show that the current emission from the cap with one adsorbed Cs is 3.4 times larger than the cap without any Cs. It is 9.6 times larger in the cap with two adsorbed Cs atoms. After Cs deposition the emission patterns become asymmetric (current emission from the carbon atoms located at the topmost pentagon ring close to Cs atoms is larger than the other atomic sites). There are very few localized states on Cs atoms. Hence, although the tunneling probability of electron emission from Cs atoms is significant, there is no current from Cs atoms. In addition, the effect of Cs on work function reduction of nanotubes is explained in terms of Cs deposition densities and the surface dipole moments.     

Toward a practical and waste-free synthesis of thioureas in water

An operationally simple and entirely green protocol for the synthesis of thiourea derivatives by the reaction of carbon disulfide with primary amines in pure water is developed. This reaction is a highly atom-economic process for production of highly pure, hindered thioureas without any catalyst and tedious work-up.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Lack of anomalous diffusion in linear translationally-invariant systems determined by only one initial condition

It is shown that as far as the linear diffusion equation meets both time- and space-translational invariance, the time dependence of a moment of degree α is a polynomial of degree at most equal to α, while all connected moments are at most linear functions of time. As a special case, the variance is an at most linear function of time.     

N2O同位素的紫外光解：同位素分馏和产物的转动量子态分布

采用时间依赖的量子波包法研究¹⁴N¹⁴N¹⁶O、¹⁴N¹⁵N¹⁶O、¹⁵N¹⁴N¹⁶O、¹⁵N¹⁵N¹⁶O、¹⁴N¹⁴N¹⁷O和¹⁴N^{14相似文献}