Simultaneous photoconjugation of methylene blue and cis-Rh(phen)2Cl2+ to DNA via a synergistic effect

Irradiation of the red-light absorbing dye, methylene blue (MB), in the presence of the metal complex, cis-Rh(phen)2Cl2+ (BISPHEN), leads to irreversible photobinding of both reagents to DNA. Evidence from absorption and emission spectroscopy indicates that the dye is strongly complexed to the DNA at the concentrations used in the experiments and that this complex is unaffected by the presence of BISPHEN. The level of covalent binding is proportional to the absorbed light dose, with the quantum efficiency for covalent binding of BISPHEN to the DNA with 633 nm light equal to 3.5 x 10(-4). Electrospray ionization mass spectrum of a mixture of DNA fragments created by enzymatic degradation of DNA isolated following irradiation indicates that purine adducts are formed with both BISPHEN and the dye. In addition, UV-Vis and high-performance liquid chromatography analyses of the irradiated MB/BISPHEN/DNA mixture and isolated adducts show extensive conversion of the dye and metal complex to the corresponding N-demethylated and aquated derivatives, respectively. Triplet quenchers for MB, for example oxygen and benzoquinone, inhibit both the photoconjugation and the photochemistry of BISPHEN. A mechanism for the synergistic interaction is proposed that involves photoconjugation of both partners to the DNA following oxidation and reduction via electron transfer between 1MB*/DNA and 3MB*/BISPHEN.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

The use of Nafion-H® as an efficient catalyst for the direct conversion of primary and secondary trimethylsilyl ethers to their corresponding ethers under mild and heterogeneous conditions

Primary and secondary trimethylsilyl ethers were converted to their corresponding ethers in the presence Nafion-H® with good to excellent yields under mild and heterogeneous conditions.     

Analysis of 2beta-carbomethoxy-3beta-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane in rat plasma. II. Pharmacokinetic profile in male and female Sprague-Dawley rats evaluated by capillary electrophoresis

This paper describes a pharmacokinetic study performed in Sprague-Dawley rats after i.v. administration of a single 6-mg/kg dose of 2beta-carbomethoxy-3beta-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane (Altropane). Plasma samples were collected from the retro-orbital sinus at times up to 3 h after drug administration, extracted by solid-phase extraction, and the drug levels determined by capillary electrophoresis (CE). Pharmacokinetic parameters were determined by a standard noncompartmental model using WinNonlin version 1.5. The maximum plasma concentrations, clearances of the drug, and areas under the curve for male and female rats were 5.74 and 7.26 microg/ml, 135.7 and 98.5 ml/kg x min, and 44.23 and 60.92 microg x min/ml, respectively. The drug was cleared very rapidly from the systemic circulation, with a terminal t(1/2) of 7 to 10 min and a mean residence time of about 11 min for both sexes. The volume of distribution was approximately 1 l/kg. No metabolites were detected when the samples were analyzed individually. However, after samples were pooled and concentrated, traces of two unknown peaks that may represent metabolites were detected in concentrates from the last two timepoints. Part I of this work [J. Chromatogr. A, 895 (2000) 87] describes validation of CE methods for the analysis of aqueous and plasma samples of Altropane, including its solid-phase extraction from rat plasma.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

Synthesis, Characterization, and Biological Activity of n-Tributyltin Derivatives of Pharmaceutically Active Carboxylates

Summary.  Tributyltin(IV) derivatives of six different pharmaceutically active carboxylates were synthesized. The complexes were characterized by different analytical techniques (elemental analysis; infrared, NMR, and mass spectroscopy). ¹¹⁹Sn NMR data were also recorded in six different coordinating and non-coordinating solvents. The antibacterial activities of the compounds were tested using ten different bacteria relative to the reference drugs ampicillin and cephalexin. Received September 20, 2001. Accepted (revised) December 6, 2001     

Koordinationschemie von Dinitroresorcin mit Kupfer-, Kobalt-, Nickel-, Eisen- und Zinksalzen

The reactions of the bidentate dinitrosoresorcinol (DNR) with copper, cobalt, nickel, iron and zinc salts were investigated. This ligand was found to react with these metal salts in aqueous media where hydrogen ion was confirmed to be liberated except in case of iron. The solid complexes were prepared in alcoholic media. Chemical analyses, magnetic and spectral data were compatible to determine the structure of these complexes and their mode of chelation.

---

---

Mit 2 Abbildungen     

Low molecular weight organogels based on long-chain carbamates

Thermoreversible organogels were prepared from carbamates with alkyl side chains of different lengths. Gelation was possible only up to an alkyl side chain length of 12 carbons, beyond which crystallization occurs, due to the dominant van der Waals interaction between the alkyl chains. This is in contrast to other alkane-based organogels, in which gelating efficiency increased with the length of the alkane chain (see Abdallah, D. J.; Weiss, R. G. Adv. Mater. 2000, 12, 1237). The critical concentration for gelation decreases drastically with an increase in the side chain length. Xerogels of these show birefringent fibers with uniform cross section and unlimited growth in one direction. The extent of this unlimited growth is affected by the length of the alkyl side chain in the carbamate, which finally ceases the gel formation ability of the carbamate. Cryogenic scanning electron microscopy images of the gels are similar to those of xerogels. From X-ray diffraction of the fibers, we propose that the growth direction is along the plane of hydrogen bonds between the carbamate molecules. The thickness of the fibers depends on the length of the alkyl side chain. Morphological differences are seen between gels prepared by slow cooling and quenching of the solution. Thus, the morphology of the fibrous xerogels of the carbamates can be tailored for specific applications, by the choice of the alkyl side chain length and the rate of cooling the solution.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.