The efficient, 12–14 step (LLS) total synthesis of (?)‐halenaquinone has been achieved. Key steps in the synthetic sequence include: (a) proline sulfonamide‐catalyzed, Yamada–Otani reaction to establish the C6 all‐carbon quaternary stereocenter, (b) multiple, novel palladium‐mediated oxidative cyclizations to introduce the furan moiety, and (c) oxidative Bergman cyclization to form the final quinone ring. 相似文献
The pentafluorophenyl (PFP) column is emerging as a new advancement in separation science to analyze a wide range of analytes and, thus, its separation mechanism at supramolecular level is significant. We developed a mechanism for the separation of ibuprofen and omeprazole using different combinations (ranging from 50:50 to 60:40) of water–acetonitrile containing 0.1% formic acid as the mobile phase. The column used was Waters Acquity UPLC HSS PFP (75 × 2.1 mm, 1.8 μm). The reverse order of elution was observed in different combinations of the mobile phases. The docking study indicated hydrogen bonding between ibuprofen and PFP stationary phase (binding energy was −11.30 kJ/mol). Separation at PFP stationary phase is controlled by hydrogen bonding along with π–π interactions. This stationary phase may be used to analyze both aromatic and aliphatic analytes. The developed mechanism will be useful to separate various analytes by considering the possible interactions, leading to saving of energy, time and money. In addition, this work will be highly useful in preparative chromatography where separation is the major problem at a large scale. Moreover, the developed LC‐MS‐QTOF method may be used to analyze ibuprofen and omeprazole in an unknown sample owing to the low value of detection limits. 相似文献
Supercapacitors, also called as ultracapacitors, are electrochemical energy-storage devices that exploit the electrostatic interaction between high-surface-area nanoporous electrodes and electrolyte ions, combining properties of conventional batteries and conventional capacitors. A symmetrical activated carbon (AC) electrode supercapacitor has been fabricated in a simple and inexpensive manner. The AC has been synthesized from Charcoal, has activated in a furnace at high temperatures. The electrode was fabricated by casting slurry made of AC and blended in a polymer solution on the counter electrode (current collector), appeared to have high mechanical strength. The electrochemical performance of the prepared samples was tested in 1 M KCl solution by cyclic voltammetry (CV), galvanostatic charge discharge technique, and impedance spectroscopy. The surface and cross-section of electrode was observed with SEM. Capacitance of fabricated supercapacitor has a favorable capacitance in the range of 65–70 F/g with low resistance. The AC electrode supercapacitor has excellent electro chemical reversibility, good cycle stability with a low fading rate of specific capacitance even after 500 cycles, which is promising for energy storage applications. 相似文献
This article focused on the construction and characteristics of novelty and sensitivity of modified carbon paste electrodes for determination of doxycycline hydrochloride (DC.HCl) in urine, serum and pharmaceutical preparations. It was based on the incorporation of α-cyclodextrine (α-CD) and multi-walled carbon nanotube (MWCNT) ionophores which improved the characteristics of the electrodes with tricresylphosphate (TCP) (electrode I) and o-nitrophenyloctylether (o-NPOE) (electrode II) as plasticizers, respectively. The constructed electrodes, at optimum paste composition, exhibited good Nernstian response for determination of doxycycline hydrochloride over a linear concentration range from 1.0 × 10–7 to 1.0 × 10–2 and 1.22 × 10–7 to 1.0 × 10–2 mol L–1 with detection limit of 1.0 × 10–7 and 1.22 ×10–7 mol L–1 and with slope values of (58.7 ± 0.2) mV decade–1 and (58.0 ± 0.6) mV decade–1, for modified carbon paste electrodes (MCPEs; electrodes I and II), respectively. The results showed fast dynamic response time (about 6–7 s) and long lifetime in the range from 4 to 5 months where the response of the electrodes was not affected by pH variation within the range from 2 to 8 and 2 to 7.5 for electrodes I and II, respectively. Electrodes I and II showed high selectivity for doxycycline hydrochloride with respect to a large number of interfering species including foreign inorganic, organic species, excipients and the fillers added to the pharmaceutical preparation. The constructed electrodes were successfully applied for determination of DC.HCl in pure form, its pharmaceutical preparations and biological fluids (urine and serum) using standard addition, calibration curves and potentiometric titration methods. The results obtained using these potentiometric electrodes were comparable with those obtained using official method. The results were satisfactory with excellent percentage recovery comparable or better than those obtained by other routine methods.
JPC – Journal of Planar Chromatography – Modern TLC - The discovery of potent antidiabetic drugs is of necessity owing to the rapid prevalence of diabetes worldwide. The investigation... 相似文献
Journal of Sol-Gel Science and Technology - Benzamide is successfully degraded on the novel heterosystem NiMn2O4/TiO2 under visible light. The nanosized spinel is synthesized by the sol–gel... 相似文献
Zeolite crystals having faujasite-type (FAU) topology in the nanometer range were first synthesized from amorphous rice husk ash at a low temperature of 363 K under autogenous pressure. Following this, surface functionalization of the produced zeolite with 5-amino-3-thiomethyl 1H-pyrazole-4-carbonitrile (pyrazole; Py) was carried out by two different methods, namely liquefied-period adsorption of Py (Py/Yim) and a flexible ligand method (Py/Yss). The latter provides a larger amount of Py formed into as-made zeolite-Y. The sorption of Fe(III) onto Py/NaY afforded large meso–macroporosity introduced by the aggregation–assembly between Fe(III)Py complexes and NaY zeolite, which was typically evidenced for Fe(III)Py/Yss. The materials were characterized by XRD, FT-IR spectroscopy, thermal analysis (TGA) and porous structure by N2 adsorption–desorption at 77 K. The XRD evaluation showed that the zeolite structure was managed right after adding Fe(III) to Py/Y, although a change in intensity of the zeolite reflections on complex formation was noticed. The FT-IR spectrum of Fe(III)Py/Yss exhibited two bands at 3594 and 3542 cm?1 assigned to bridging hydroxyl groups associated with a Brönsted site, which did not exist in the spectra of Fe(III)Py/Yim and Fe(III)-exchanged as-made NaY zeolite. This effect was ascribed to the induced greater electronegativity of the ligand towards Fe(III) species in dissociation of water molecules, producing acidic protons that are potential Brönsted acid sites. It was also evident that the Fe(III) adsorption capacity on Py/Yss is greater than on as-made NaY zeolite and Py/Yim, owing most likely to the increasing concentration of the incorporating Py ligand which leads to an increase in the number of binding sites. The Fe(III) adsorption onto Py/Yss was well described by the pseudo-second-order kinetic model. Density functional theory (B3LYP/6-311G*) was performed to understanding the interaction mode of the ligand and complex with zeolite. The QSPR was calculated depending on the optimization geometries, frontier molecular orbitals, thermodynamic parameters, and global chemical reactivates, which were discussed for the studied compounds. The HOMOs, LUMOs and molecular electrostatic potentials were plotted to elucidate the interaction manner of the tested compounds with the zeolite. The nonlinear optical properties were elucidated via 1st and 2nd hyper-polarizabilities. The auto-degradation behavior was predicted for the complex, based on the ionization optional and bond dissociation enthalpy. The interactions between Py and Fe(III)Py with the zeolite surface have been described with molecular dynamics using a Monte Carlo simulation. 相似文献
A new Schiff base ligand (HL) was prepared via a condensation reaction of quinoline‐2‐carboxaldhyde with 2‐aminophenol in a molar ratio of 1:1. Its transition metal mixed ligand complexes with 1,10‐phenanthroline (1,10‐phen) as co‐ligand were also synthesized in a 1:1:1 ratio. HL and its mixed ligand complexes were characterized using elemental analysis, infrared, 1H NMR, mass and UV–visible spectroscopies, molar conductance, magnetic measurements, solid reflectance, thermal analysis, electron spin resonance and X‐ray diffraction. Molar conductance measurements showed that all complexes have an electrolytic nature, except Cd(II) complex. From elemental and spectral data, the formulae [M(L)(1,10‐phen)(H2O)]Clx?nH2O (where M = Cr(III) (x = n = 2), Mn(II) and Ni(II) (x = 1, n = 2), Fe(III) (x = n = 2), Co(II), Cu(II) and Zn(II) (x = 1, n = 2)) and [Cd(L)(1,10‐phen)Cl]?3H2O for the metal complexes have been proposed. The geometric structures of complexes were found to be octahedral. Powder X‐ray diffraction reflected the crystalline nature of the complexes; however, the Schiff base is amorphous. HL and its mixed ligand complexes were screened against Gram‐positive bacteria (Streptococcus pneumoniae and Bacillus subtilis) and Gram‐negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Antifungal activity was determined against Aspergillus fumigatus and Candida albicans, the data showing that most complexes had activity less than that of the Schiff base while Mn(II), Fe(III) and Ni(II) complexes showed no significant antifungal activity. The anticancer activity of HL and its metal complexes was also studied against breast and colon cell lines. The metal complexes showed IC50 higher than that of HL, especially the Cu(II) complex which showed the highest IC50 against breast cell line. 相似文献
Coordination compounds of Fe(III), Zn(II), Ni(II), Co(II), Cu(II), Cd(II) and Mn(II) ions were synthesized from the ligand [4,4′‐((((ethane‐1,2‐diylbis(oxy))bis(2,1‐phenylene))bis(methanylylidene))bis(azanylylidene))diphenol]ethane (H2L) derived from the condensation of bisaldehyde and 4‐aminophenol. Microanalysis, magnetic susceptibility, infrared, 1H NMR and mass spectroscopies, molar conductance, X ray powder diffraction and thermal analysis were used to confirm the structure of the synthesized chelates. According to the data obtained, the composition of the 1:1 metal ion–bis‐Schiff base ligand was found to be [M(H2L)(H2O)2]Cln (M = Zn(II), Ni(II), Co(II), Cu(II), Cd(II) and Mn(II), n = 2; Fe(III), n = 3). Magnetic susceptibility measurements and reflectance spectra suggested an octahedral geometry for the complexes. Central metals ions and bis‐Schiff base coordinated together via O2 and N2 donor sites which as evident from infrared spectra. The Gaussian09 program was applied to optimize the structural formula for the investigated Schiff base ligand. The energy gaps and other important theoretical parameters were calculated applying the DFT/B3LYP method. Molecular docking using AutoDock tools was utilized to explain the experimental behaviour of the Schiff base ligand towards proteins of Bacillus subtilis (5 h67), Escherichia coli (3 t88), Proteus vulgaris (5i39) and Staphylococcus aureus (3ty7) microorganisms through theoretical calculations. The docked protein receptors were investigated and the energies of hydrogen bonding were calculated. These complexes were then subjected to in vitro antibacterial studies against several organisms, both Gram negative (P. vulgaris and E. coli) and Gram positive (S. pyogones and B. subtilis). The ligand and metal complexes exhibited good microbial activity against the Gram‐positive and Gram‐negative bacteria. 相似文献
Series of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes were prepared with tetradentate Schiff base ligand derived by condensation of 2‐aminophenol with dibenzoylmethane. The novel Schiff base H2L (2–2′‐((1Z,1Z’)‐(1,3‐diphenyl propane‐1,3 diylidene) bis (azanylylidene) diphenol) and its binary metal complexes were characterized by physicochemical procedures i.e. elemental analysis, FT‐IR, UV–Vis, thermal analyses (TGA/DTG), mass spectrometry, magnetic susceptibility and conductometric measurements. On the basis of these studies, an octahedral geometry for all these complexes was proposed expect Ni(II) complex which had tetrahedral geometry. Molar conductivity values revealed that the complexes were electrolytes except Mn(II), Zn(II) and Cd(II) complexes were non electrolytes. The ligand bound to the metal ions via two azomethine N and two phenolic OH as indicated from the IR and 1H NMR spectral study. The molecular and electronic structures of H2L and its zinc complex were optimized theoretically and the quantum chemical parameters were calculated. The antimicrobial activity against a number of bacterial organisms as Streptococcus pneumonia, Bacillus Subtilis, Pseudomonas aeruginosa and Escherichia coli and fungi as Aspergillus fumigates, Syncephalastrum racemosum, Geotricum candidum and Candida albicans by disk diffusion method were screened for the Schiff base and its complexes. The Cd(II) complex has potent antimicrobial activity. Anticancer activity of the Schiff base ligand and its metal complexes were evaluated in human cancer (MCF‐7 cells viability). The Cr(III) complex exhibited higher activity than other complexes and ligand. Molecular docking was used to predict the binding between Schiff base ligand (H2L) and its Zn(II) complex and the receptors of RNA of amikacin antibiotic (4P20) and human‐DNA‐Topo I complex (1SC7). The docking study provided useful structural information for inhibition studies. 相似文献