Experience of Control over Process of Chemical-Informational Synthesis

Conditions under which various kinds of carbon nanoparticles are obtained by thermal oxidative conversion of methane in chlorine in the temperature range 20-500°C were studied. The influence exerted by conditions of synthesis of nanodispersed carbon on the properties of its samples was analyzed.     

The effect of high electric fields on the structure and dielectric properties of the B2 phase

Dielectric studies are presented of a banana-shaped compound that exhibits the antiferroelectric B₂ phase. Upon application and subsequent removal of strong electric fields the textures and dielectric properties of the phase drastically change. Most notable is the huge increase of the low frequency permittivity. This behaviour would suggest the induction of ferroelectricity by the electric field.     

A Study of Drop Size Distribution in Multistage Bubble Extractor

Results obtained in determining experimentally the mean volume-surface drop diameter of the dispersed phase in a multistage bubble extractor are presented.     

Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Nickel as a chemical modifier for sensitivity enhancement and fast atomization processes in electrothermal atomic absorption spectrometric determination of cadmium in biological and environmental samples.

A systematic study of the efficiency of protons, Ni, Pd and Th as chemical modifiers for the determination of cadmium by electrothermal atomic absorption spectrometry (ETAAS) using fast temperature programs was made for platform atomization. A comparison was made in terms of the salt type, absorbance-time profiles and elimination of the sodium chloride interference. The results were adapted to develop a method for the ETAAS determination of cadmium in biological and environmental samples. The highest sensitivity to determine cadmium in biological and environmental samples was obtained using nickel (together with protons) as a chemical modifier. The accuracy of the method was tested by the determination of cadmium in different certified reference materials. The best detection limit and the characteristic mass of Cd were found to be 0.03 ng mL(-1) and 0.35 pg, respectively.