CsBr高压X光研究

 采用同步辐射X光源和能散法，对CsBr粉末样品进行高压原位X光衍射实验。由金刚石对顶压砧高压装置（DAC）产生高压，用已知状态方程的Pt粉末作内标，由Pt的衍射数据确定样品压力，最高压力达64.4 GPa。实验结果表明：室温常压下原始CsBr样品是具有简单立方结构的晶体，其晶格常数α＝0.428 5 nm。高压下CsBr的结构有所变化，在51.3~58.4 GPa的压力范围内，(110)线和(211)线发生劈裂，从而形成了四方相。     

注入控制铜蒸气激光方向性时间过程测量

实验研究了注入控制对铜蒸气激光非稳腔输出光束质量的影响，从输出光发散角时间分辨过程的测量结果说明注入加速被注入腔内激光发散角的减小过程。由于被注入腔内放大自发辐射的存在，为得到较好的注入控制效果，注入光的脉宽和进入被注入腔的延时必须恰当。     

离焦散斑技术研究Kirchhoff板在动载作用期的弯曲

本文使用动态离焦散斑技术,测试板的动态弯曲获得成功。并推导了Kirchhoff板动态变形的有关分析,提出了由最大斜率确定材料常数的思想。显然,这是同离焦散斑方法所测数据直接相关的处理手法。     

在局部区域上的奇摄动反应扩散方程初始边值问题

本文是讨论一类在局部区域上的奇摄动反应扩散初始边值问题.利用算子理论和 不动点原理,得到了相应问题解的存在性和唯一性.     

非线性时滞反应扩散方程组的奇摄动

本文研究了一类奇摄动非线性时滞反应扩散方程组,利用微分不等式方法,得到了解的一致有效的渐近展开式.     

铽－甲基吲哚乙酰丙酮三元配合物发光过程研究

测定和分析了ＲＥ．Ｌ１．Ｌ２（ＲＥ＝Ｔｂ（Ⅲ）、Ｇｄ（Ⅲ），Ｌ１＝３Ｍ（３甲基吲哚－１－乙酰基丙酮），Ｌ２＝ＴＰＰＯ、Ｐｈｅｎ、Ｄｉｐｙ）三元配合物的荧光光谱、磷光光谱、磷光寿命及变温荧光光谱等．讨论了Ｔｂ（Ⅲ）与配体之间的能级匹配和Ｌ１与Ｌ２的三重态之间传能的问题，说明了影响这些三元配合物荧光效率的主要因素及其发光过程．     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.     

原子力显微术轻敲模式中探针样品接触过程及相位衬度研究

借助简单的有阻尼受迫振子模型，研究了原子力显微术轻敲模式中探针与样品接触时间t_c、样品的表面形变D_z和相位衬度对探针设置高度z_c及样品杨氏模量E_s的依赖关系.结果发现,t_c与D_z均随E_s及z_c的增大而减小，同时探针与样品作用过程伴随很小的能量耗散.对轻敲过程中相移量φ的研究表明，E_s较大的样品有较小的φ，且φ随 关键词： 原子力显微术 轻敲模式 相位衬度     

Growth of single-crystal magnetite nanowires from Fe3O4 nanoparticles in a surfactant-free hydrothermal process

Single-crystal magnetite nanowires with average diameter of ca. 20 nm and length of up to several micrometers were prepared by a simple alkaline surfactant-free hydrothermal process. The crystallinity, purity, morphology, and structural features of the as-prepared magnetite nanowires were investigated by powder X-ray diffraction, transmission electron microscopy (TEM) and selected area electron diffraction. The composition and length of nanowires depends on the pH, with higher pH favoring longer nanowires composed entirely of Fe₃O₄. A mechanism for nanowire growth is proposed.