Reversed-phase porous silica rods, an alternative approach to high-performance liquid chromatographic separation using the sequential injection chromatography technique

A commercially available porous silica rod column was used as a separation tool for the sequential injection analysis (SIA). A porous solid monolithic column showed high performance at a low pressure, allowing sequential injection analysis to be used for the first time for separation in HPLC fashion. In this contribution, we tried to demonstrate a new separation concept with SIA manifold for the simultaneous determination of four different compounds (methylparaben (MP), propylparaben (PP), triamcinolone acetonide (TCA) and internal standard ketoprofen (KP)) in a pharmaceutical triamcinolon cream 0.1% formulation. A Chromolith Flash RP-18e, 25 mm x 4.6 mm column with a 10 mm pre-column (Merck, Germany) and a FIAlab 3000 system (USA) with an 8-port selection valve and 10 ml syringe were used for sequential injection chromatographic separations in our study. The mobile phase used was acetonitrile-methanol-water (35:5:65, v/v/v) + 0.05% nonylamine, pH 2.5, flow rate 0.6 ml min(-1). The analysis time was <6 min. A novel sequential injection chromatography (SIC) technique with UV spectrophotometric detection was optimised and validated.     

Mn(III)/Cu(II)-mediated oxidative radical cyclization of alpha-(Methylthio)acetamides leading to erythrinanes

Treatment of N-[2-(3,4-dimethoxyphenyl)ethyl]-alpha-(methylthio)acetamide 3 with Mn(OAc)3 in the presence of Cu(OAc)2 gave tetrahydroindol-2-one 4, which then cyclized with Mn(OAc)3 to give 4-acetoxyerythrinane 5. A similar reaction of the 3,4-methylenedioxyphenyl congener 8 also gave tetrahydroindol-2-one 9, which, however, gave only a trace amount of the Mn(OAc)3-mediated cyclization product 11 and afforded the oxidation product 10. On the basis of these results, formation of 5 from 4 was thought to proceed via nucleophilic attack of the pyrrole ring on the cation-radical lX, generated by a single electron-transfer reaction of the acetoxy-substituted intermediate V. Treatment of compound 16 with Mn(OAc)3/Cu(OAc)2 gave no erythrinane derivative with recovery of the starting material, indicating that the presence of a methylthio group of 4 is essential for effecting the formation of erythrinane 5. On the other hand, treatment of 3 with Mn(OAc)3 using Cu(OTf)2 as an additive in place of Cu(OAc)2 gave another erythrinane 17. This method was applied to a formal synthesis of 3-demethoxyerythratidinone (20), a naturally occurring Erythrina alkaloid.     

Chiral trans hydrindenones : synthesis of optically pure [3aαH(S), 7aβMe(S)trans-1-methyl-7a-methylhydrindan-1,4-diene-6-one

An intramolecular S_N2 displacement at an essentially neopentylic centre, capable of generating trans-hydrindenone (13) is described.     

Sequential injection chromatographic determination of ambroxol hydrochloride and doxycycline in pharmaceutical preparations

A new separation method based on a novel reversed-phase sequential injection chromatography (SIC) technique was used for simultaneous determination of ambroxol hydrochloride and doxycycline in pharmaceutical preparations in this contribution.The coupling of short monolith with SIA system results in an implementation of separation step to until no-separation low-pressure method.A Chromolith^® Flash RP-18e, 25-4.6 mm column (Merck, Germany) and a FIAlab^® 3000 system (USA) with a six-port selection valve and 5 ml syringe were used for sequential injection chromatographic separations in our study. The mobile phase used was acetonitrile-water (20:90, v/v), pH 2.5 adjusted with 98% phosphoric acid, flow rate 0.48 ml min⁻¹, UV detection was at 213 nm.The validation parameters have shown good results: linearity of determination for both compounds including internal standard (ethylparaben) >0.999; repeatability of determination (R.S.D.) in the range 0.5-5.4% at three different concentration levels, detection limits in the range 0.5-2.0 μg ml⁻¹, and recovery from the pharmaceutical preparation in the range 99.3-99.9%. The chromatographic resolution between peak compounds was >5.0 and analysis time was <9 min under the optimal conditions. The method was found to be applicable for routine analysis of the active compounds ambroxol hydrochloride and doxycycline in various pharmaceutical preparations.     

Determination of rhodamine 123 by sequential injection technique for pharmacokinetic studies in the rat placenta

The sequential injection (SIA) technique was applied in pharmacokinetic studies of the transporter-mediated passage of a model substrate, rhodamine 123 (Rho123), through the dually perfused rat term placenta. The method described was used for real-time monitoring of Rho123 concentrations in both the maternal and fetal compartments. Determination was processed by fluorescence detection (λ_ex=480 nm, λ_em580 nm); calibration curve was linear over the range 0.01–50 μmol l⁻¹ (r=0.99965), detection limit was 10 nmol l⁻¹ (3σ) and RSD2% (10 readings). Transport of Rho123 was scanned under various conditions (ATP-synthesis inhibition) and several inhibitors of P-glycoprotein transporter were tested (e.g. quinidine). The advantages of the modern SIA method—an automated analytical tool providing both fast and precise analysis—were successfully demonstrated for examination of transport profiles to investigate the effect of P-glycoprotein on the placental transfer of Rho123.     

A canonical form of a system of microdifferential equations with non-involutory characteristics and branching of singularities

We study a system of microdifferential (=pseudodifferential) equations. We assume that the characteristic varietyV of takes the formV=V ₁V₂; hereV ₁andV ₂are regular involutory submanifolds and intersect normally, andV ₁V₂is non-involutory and 1-codimensional both inV ₁and inV ₂. We also assume that has regular singularities alongV. Then we give a canonical form of in the complex domain. This enables us to investigate the branching of supports of microfunction solutions of when is hyperbolic.