Rapid Evaluation of the Bioremediation of Fuel Oil in Soil by Gas Chromatography–Laser Ionization Time-of-Flight Mass Spectrometry

Gas chromatography–laser ionization time-of-flight mass spectrometry (GC-LI-TOFMS) was applied to the analysis of fuel oil in soil and soil treated by bioremediation. To demonstrate rapid and selective measurement, only filtered samples after extraction of fuel oil from soil were prepared. The required time for preparing three sample solutions from an oil-contaminated soil sample was only ca. 30?min. The degree of the decrease in the fuel oil in a soil sample by vaporization was confirmed by GC-LI-TOFMS, and after 7 days, the five peak areas arising from the constituents in fuel oil were decreased to between 39 and 79% of their original values. Next, the effect of bioremediation was confirmed by the addition of microbes (Rhodococcus sp. and Acinetobacter sp.). As a result, after 7 days, the five peak areas were decreased to between 61 and 81% of the values of the first decreases, after allowing for the effect of vaporization. This method showed sufficient selectivity, robustness, and rapidity for the measurement of oil-contaminated soil treated by bioremediation, which is essential for the evaluation of real environmental remediation.     

Double‐trace deformations and entanglement entropy in AdS

We compute the bulk entanglement entropy of a massive scalar field in a Poincare AdS with the Dirichlet and Neumann boundary condition when we trace out a half space. Moreover, by taking into account the quantum back reaction to the minimal surface area, we calculate how much the entanglement entropy changes under a double‐trace deformation of a holographic CFT. In the AdS3/CFT2 setup, our result agrees with the known result in 2d CFTs. In higher dimensions, our results offer holographic predictions.     

Supramolecular helical assembly of an achiral cyanine dye in an induced helical amphiphilic poly(phenylacetylene) interior in water

A water-soluble amphiphilic poly(phenylacetylene) bearing the bulky aza-18-crown-6-ether pendants forms a one-handed helix induced by l- or d-amino acids and chiral amino alcohols through specific host-guest interactions in water. We now report that such an induced helical poly(phenylacetylene) with a controlled helix sense can selectively trap an achiral benzoxazole cyanine dye among various structurally similar cyanine dyes within its hydrophobic helical cavity inside the polymer in acidic water, resulting in the formation of supramolecular helical aggregates, which exhibit an induced circular dichroism (ICD) in the cyanine dye chromophore region. The supramolecular chirality induced in the cyanine aggregates could be further memorized when the template helical polymer lost its optical activity and further inverted into the opposite helicity. Thereafter, thermal racemization of the helical aggregates slowly took place.     

Water‐dispersible microgel modified with methacryloyl groups by ionic bonding on the surface and the photopolymer microgel

A novel water‐dispersible reactive microgel, which had a diameter of 40–90 nm, was synthesized for photopolymer materials. The microgels have segments with substituted ammonium groups, to provide water solubility, in their polymer networked structure. It has unsaturated groups connected to the quaternary nitrogens by ionic bonding (I‐type microgel). The I‐type microgel was compared with one that has methacryloyl groups connected with the quaternary nitrogens of the microgel by covalent bonding (C‐type microgel). The I‐type microgels were able to separately control the modified amount of quaternary nitrogen and methacryloyl group. In the presence of 2,4‐diethylthioxantone as a photoinitiator and pentaerthritol triacrylate as a crosslinker, the photopolymer containing the C‐type or I‐type microgels had sensitivity high enough for practical use. Not only the amount of the methacryloyl group of the microgel but the amount of the quaternary nitrogen affected the sensitivity and the rate of polymerization of the water‐dispersible photopolymer containing the I‐type microgels. Copyright © 2000 John Wiley & Sons, Ltd.     

Rectilinear distance to a facility in the presence of a square barrier

This paper derives analytical expressions for the rectilinear distance to a facility in the presence of a square barrier. The distribution of the barrier distance is derived for two regular patterns of facilities: square and diamond lattices. This distribution, which provides all the information about the barrier distance, will be useful for facility location problems with barriers and reliability analysis of facility location. The distribution of the barrier distance demonstrates how the location and the size of the barrier affect the barrier distance. A?numerical example shows that the total barrier distance increases as the barrier gets closer to a facility, whereas the maximum barrier distance increases as the barrier becomes greater in size.     

Proton dechanneling in alkali halide mixed crystals

The effects of the lattice distortion in KCI-KBr mixed crystals on the dechanneling of 1.5 MeV protons are studied by means of backscattering. The dechanneling rate vs. the composition curve has a maximum at about 1:1 mixture of KCI and KBr. The lattice distortion in the mixed crystals is estimated from the dechanneling rate, and the result agrees well with that obtained by an X-ray measurement. The effective cross-section for the dechanneling caused by the lattice distortion is obtained, and compared with the results of a calculation based on a simple model.     

Single-Component Molecular Conductor [Cu(dmdt)(2)] with Three-Dimensionally Arranged Magnetic Moments Exhibiting a Coupled Electric and Magnetic Transition

Crystals of the single-component molecular conductor [Cu(dmdt)(2)] (dmdt = dimethyltetrathiafulvalenedithiolate) were prepared as a molecular system, with three-dimensionally arranged magnetic moments embedded in "sea" of π conduction electrons. [Cu(dmdt)(2)] had fairly large room-temperature conductivity (110 S?cm(-1)) and exhibited weakly metallic behavior near room temperature. Below 265 K, the resistivity (R) increased very slowly with decreasing temperature and then increased rapidly, indicating a transition from a highly conducting state to an insulating state near 95 K. The magnetic susceptibility showed Curie-Weiss behavior at 100-300 K (C = 0.375 emu/mol, Θ = 180 K). The Curie constant and the high-temperature resistivity behavior indicate that conduction electrons and three-dimensionally arranged magnetic moments coexist in the crystal. The ESR intensity increased down to about 95 K. The ESR signal was broadened and decreased abruptly near 95 K, suggesting that electric and antiferromagnetic transitions occurred simultaneously near 95 K. The crystal structure was determined down to 13 K. To examine the stability of the twisted conformation of Cu complex with dithiolate ligands, the dihedral angle dependence of the conformational energy of an isolated M(L)(2)(n-) molecule was calculated, which revealed the dihedral angle dependence on the ligand (L) and the oxidation state of the molecule (n). High-pressure four-probe resistivity measurements were performed at 3.3-9.3 GPa using a diamond anvil cell. The small resistivity increase observed at 3.3 GPa below 60 K suggested that the insulating transition observed at ambient pressure near 95 K was essentially suppressed at 3.3 GPa. The intermolecular magnetic interactions were examined on the basis of simple mean field theory of antiferromagnetic transition and the calculated intermolecular overlap integrals of the singly occupied molecular orbital (SOMO) of Cu(dmdt)(2).     

The Reaction K¯ d → π Σn in the Λ(1405) Resonance Region

Calculations of K¯ d → π Σn in the Λ(1405) resonance region are presented taking into account single scattering and two-step processes. The influence of some common approximations in the kinematics on the predicted lineshape for the resonance are discussed.     

Viscoelastic properties of poly(methyl methacrylate) with high glass transition temperature by lithium salt addition

The effect of ion‐dipole interaction between lithium cations and oxygen atoms in poly(methyl methacrylate) (PMMA), which leads to the great enhancement of glass transition temperature (T_g), on the linear viscoelastic properties is studied using binary blends of PMMA and lithium trifluoromethanesulfonate (LiCF₃SO₃). The strong interaction at low temperature leads to the high modulus in the glassy region even near T_g. The interaction becomes weak as increasing the temperature. Consequently, the rheological terminal region is clearly detected without a marked enhancement of steady‐state compliance, although the zero‐shear viscosity increases by the LiCF₃SO₃ addition. The result indicates that the crosslinking due to the ion‐dipole interaction has a lifetime that decides the longest relaxation time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2388–2394     

Continuous location model of a rectangular barrier facility

This paper develops a bi-objective model for determining the location, size, and shape of a finite-size facility. The objectives are to minimize both the closest and barrier distances. The closest distance represents the accessibility of customers, whereas the barrier distance represents the interference to travelers. The distributions of the closest and barrier distances are derived for a rectangular facility in a rectangular city where the distance is measured as the rectilinear distance. The analytical expressions for the distributions demonstrate how the location, size, and shape of the facility affect the closest and barrier distances. A numerical example shows that there exists a trade-off between the closest and barrier distances.