Cation and pressure effects on the electrochemistry of 12-tungstocobaltate and 12-tungstophosphate ions in acidic aqueous solution

The effects of supporting electrolytes and of pressure on the electrode reactions of the aqueous CoW(12)O(40)(5-/6-) couple at 25 degrees C are reported, together with limited data on PW(12)O(40)(3-)/4-) and PW(12)O(40)(4-/5-). The half-wave potentials E(1/2) for the CoW(12) couple become moderately more positive with increasing electrolyte concentration and cationic charge, and also in the sequences Li(+) approximately Na(+) < NH(4)(+) < or = H(+) < K(+) < Rb(+) < Cs(+) and Na(+) < Mg(2+) < Ca(2+) < Eu(3+). The mean diffusion coefficients for CoW(12) with the 1:1 electrolytes are independent of electrolyte concentration and rise only slightly from Li(+) to Cs(+), averaging (2.4 +/- 0.3) x 10(-6) cm(2) s(-1). Neither the volumes of activation for diffusion Delta V(diff)(++) (average -0.9 +/- 1.1 cm(3) mol(-1)) nor the electrochemical cell reaction volumes Delta V(Ag/AgCl) (average -22 +/- 2 cm(3) mol(-1)) for the CoW(12) couple show significant dependence on electrolyte identity or concentration. For the PW(12)(3-/4-) and PW(12)(4-/5-) couples, Delta V(Ag/AgCl) = -14 and -26 cm(3) mol(-1), respectively, suggesting a dependence on Delta(z(2)) (z = ionic charge number) as predicted by the Born-Drude-Nernst theory of electrostriction of solvent, but comparison with Delta V(Ag/AgCl) for CoW(12) and other anion-anion couples shows that the Born-Drude-Nernst approach fails in this context. For aqueous electrode reactions of CoW(12), as for other anionic couples such as cyanometalates, the standard rate constants k(el) show specific cation catalysis (Na(+) < K(+) < Rb(+) < Cs(+)), and Delta V(el++) is invariably positive, in the presence of supporting electrolytes. For the heavier group 1 cations, Delta V(el++) is particularly large (10-15 cm(3) mol(-1)), consistent with a partial dehydration of the cation to facilitate catalysis of the electron-transfer process. The positive values of Delta V(el++) for the CoW(12) couple cannot be attributed to rate control by solvent dynamics, which would lead to Delta V(el++) < or = Delta V(diff++), i.e., to negative or zero Delta V(el++) values. These results stand in sharp contrast to those for aqueous cationic couples, for which k(el) shows relatively little influence of the nature of the counterion and Delta V(el++) is always negative.     

Mechanism of the molecular hysteresis

The redox behavior in acetone solution of (1,5-dithiacyclooctane 1-oxide)bis(pentaammineruthenium(II)) has been characterized, where the concept of “molecular hysteresis” is presented. Detailed thermodynamics for the complex are studied, in which intramolecular electron transfer rates for Ru³⁺OS/Ru²⁺→Ru²⁺SO/Ru³⁺ were determined as 0.12 sec^?1 and 0.055 sec^?1. The molecular hysteresis consists of two important factors: isomerizations for the sulfoxideruthenium complexes and the slow intramolecular electron transfer in the complex; both are examined. Isomerization rates for Ru³⁺S→O and Ru²⁺O→S determined range from 0.4 to 5000 sec^?1 and from 0.7 to 16 sec^?1, respectively, for [Ru(NH₃)₅(sulfoxide)]^2+/3+. A mechanism for the slow electron transfer in the complex is also presented. Features of molecular hysteresis are discussed.     

An efficient synthesis of the orally-active GpIIb/IIIa antagonist FR184764

An efficient synthesis of the orally-active GpIIb/IIIa antagonist FR184764 was achieved. The key intermediate, an optically active ethynyl β-amino ester, was synthesized efficiently by utilizing a lipase catalyzed kinetic resolution step.     

Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Radical-initiated homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate

Ethyl α-hydroxymethylacrylate (EHMA) was synthesized and homopolymerized in bulk and in solution. The poly(EHMA) is readily soluble in alcohol, acetone, tetrahydrofuran, and methylene chloride at room temperature. Intramolecular lactone formation occurred when poly(EHMA) was heated to 180–230°C. The kinetics of EHMA homopolymerization was investigated in ethyl acetate, using α,α′-azobisisobutylonitrile as an initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.50[EHMA]^1.4 and the overall activation energy was calculated as 71.9 kJ/mol. Kinetic constants for EHMA polymerization were obtained as follows: k_p/k = 0.17L^0.9mol^?0.9s^?0.5; 2fk_d = 1.5 × 10^?5 s^?1. The relative reactivity ratios of EHMA(M₂) copolymerization with styrene (r₁ = 0.472, r₂ = 0.564) in ethyl acetate were obtained. Applying the Q-e scheme led to Q = 0.84 and e = 0.35 for EHMA.     

Radical-initiated homo- and copolymerization of cyanomethyl methacrylate

The kinetics of cyanomethyl methacrylate (CyMA) homopolymerization was investigated in acetonitrile with azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.49[CyMA]^1.2 and the overall activation energy was calculated as 72.3 kJ/mol. Kinetic constants for CyMA polymerization were obtained as follows: k_p/k = 0.10 L^1/2s^?1/2; 2fk_d = 1.57 × 10^?5s^?. The relative reactivity ratios of CyMA(M₂) copolymerization with styrene (r₁ = 0.15, r₂ = 0.29) and methyl methacrylate (r₁ = 0.43, r₂ = 0.75) in acetonitrile were obtained. Applying the Q-e scheme (in styrene copolymerization) led to Q = 1.64 and e = 0.98. The glass transition temperature T_g of poly(CyMA) was observed to be 91°C by thermomechanical analysis. Thermogravimetry of poly(CyMA) showed a 10% weight loss at 265°C in air.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.     

A new Zn(II) coordination polymer with 4-pyridylthioacetate: assemblies of homo-chiral helices with sulfide sites

A coordination polymer [Zn(pyta)(OH)] (pyta = 4-pyridylthioacetate), was synthesized and structurally characterized; it is constructed by an alternating assembly of two types of homo-chiral helices, [Zn-OH] and [Zn-pyta], in which the sulfide moieties are fastened in the latter columns.     

A new approach to the synthesis of pyridazino[4,5-c]pyridazinones

The reaction of 5-hydrazinopyridazin-3(2H)-ones 1 with α-keto diester 2 in acetic acid afforded the corresponding 4,6-dihydropyridazino[4,5-c]pyridazin-5(1H)-ones 3 and pyrrolo[2,3-d)pyridazin-4(5H)-ones 4 . Compounds 3 were also obtained from 4-bromo-5-hydrazinopyridazin-3(2H)-ones 8 and 2 under milder conditions. 5-Bromo-4-hydrazinopyridazin-3(2H)-one 9 , the regioisomer of 8b , also reacted readily with 2a to give 4,7-dihydropyridazino[4,5-c]pyridazin-8(1H)-one 10b , the regioisomer of 3b .