Sorption of water vapor by poly(vinyl acetate)

Summary The sorption property of water vapor by poly(vinyl acetate) (PVAc) of relatively low glass transition temperature (T _g) was studied at temperatures nearT _g.Tc_g of humidity-controlled samples of various moisture contents was measured and its variation with the moisture content was determined.T _g of the dry sample was estimated by dilatometry and DSC methods, and to confirm the value, the temperature dependence of mutual diffusion coefficient of the system of water vapor + PVAc was determined. A difference between the sorption mechanisms of water vapor by PVAc at 20 and 30 °C was observed: two sorption mechanisms are involved at 30 °C, while three mechanisms at 20 °C are involved which include the above two and another intermediate one. In earlier stage of sorption, at both 20 and 30 °C, water molecules sorbed by PVAc showed a tendency towards aggregation, while a mixing effect was found at higher stage of the sorption.

---

Zusammenfassung In der Arbeit werden Wasserdampfsorptionseigenschaften von Polyvinylacetat mit relativ niedriger Glastemperatur (T _g) in der Nähe vonT _g untersucht. Es wurden Plastizitätseinflüsse und Veränderungen vonT _g mit dem Wassergehalt studiert. Es wurde gefunden, daß bei 30 °C ein 2-Stufen-Sorptionsmechanismus, bei 20 °C ein 3-Stufen-Mechanismus existiert.

---

---

With 7 figures     

Photochemically generated silicon-carbon double-bonded intermediates VIII. Photolysis of phenyldisilane derivatives in the presence of olefins

Photolysis of phenylpentamethyldisilane, 1,1-diphenyltetramethyldisilane and 1-isopropyl-1-phenyltetramethyldisilane in the presence of a wide variety of olefins has been studied. All reactions investigated, with the exception of those with 1-methylcyclohexene and tetramethylethylene, afforded the corresponding 1/1 addition products. Yields of the adducts depended highly on the structure of the olefins used. In the photolysis of phenylpentamethyldisilane in the presence of an equimolar mixture of 1,1- and 1,2-bis(trimethylsilyl)ethene under competitive reaction conditions, the main product was the one arising from the 1,1-isomer. A possible mechanism for the process of addition of olefin to the photochemically generated silicon-carbon double-bonded intermediate (A) is discussed.     

Statistical mechanical treatment of protein conformation. III. Prediction of protein conformation based on a three-state model.

The method proposed for the evaluation of statistical weights in paper I, and the three-state model [alpha-helical (alpha), extended (epsilon), and other (c) states] formulated in paper II, have been used to develop a procedure to predict the backbone conformations of proteins, based on the concept of the predominant role played by shortrange interactions in determining protein conformation. Conformational probability profiles, in which the probabilities of formation of three consecutive alpha-helical conformations (triad) and of four consecutive extended conformations (tetrad) have been defined relative to their average values over the whole molecule, are calculated for 19 proteins, of which 16 had been used in paper I to evaluate the set of statistical weights of the 20 naturally occurring amino acids. By comparing these conformational probability profiles to experimental x-ray observations, the following results have been obtained: 80% of the alpha-helical regions and 72% of the extended conformational regions have been predicted correctly for the 19 proteins. The percentage of residues predicted correctly is in the range of 53 to 90% for the alpha-helical conformation and in the range of 63 to 88% for the extended conformation for the 19 proteins in the two-state models [alpha-helical (alpha) and other (c) states, and extended (epsilon) and other (c) states]. In the three-state model, the percentage of residues predicted correctly is in the range of 47% to 77 for 19 proteins. These results suggest that the assumption of the dominance of short-range interactions, on which the predictive scheme is based, is a reasonable one. The present predictive method is compared with that of other authors.     

A general and convenient method for the synthesis of unesterified carbamoyl- and thiocarbamoyl-phosphonic acids

Unesterified carbamoyl- and thiocarbamoyl-phosphonic acids were prepared in high yields by the reaction of tris(trimethylsilyl) phosphite with isocyanates and isothiocyanates followed by treatment of the 1:1 carbonyl adducts with aniline-containing methanol.     

Self-cooling effect on the kinetics of nonisothermal dehydration of lithium sulfate monohydrate

The effects of self cooling on the apparent kinetics of the nonisothermal dehydration of crushed crystals of lithium sulfate monohydrate were investigated using TG accompanied by DTA and power-compensation type DSC. Linearity of the sample heating rate on the TG-DSC system is much better than that on the TG-DTA. Kinetic obedience and Arrhenius parameters obtained from the TG-DTA deviate considerably from those obtained from the TG-DSC; the latter are the more accurate due to the better linearity of the sample heating rate.

---

Zusammenfassung Mittels TG, ergänzt durch DTA und DSC mit Leistungskompensation wurde der Einfluß des Self-cooling-Effektes auf die scheinbare Kinetik der nichtisothermen Dehydratation von zerkleinerten Kristallen aus Lithiumsulfat-Monohydrat geschätzt. Die mittels TG-DTA erhaltene Kinetik und die Arrheniusschen Parameter weichen erheblich von denen ab, die mittels TG-DSC ermittelt wurden. DSC mit Leistungskompensation und TG-DSC haben gegenüber TG oder TG-DTA den großen Vorteil, das nichtisotherme kinetische Verhalten von Feststoffzersetzungen zu charakterisieren. Mittels Thermoanalyse nichtisotherm ermittelte kinetische Parameter sind ohne Anwendung von DSC eher unreell, besonders wenn sie bei größeren Aufheizgeschwindigkeiten und Probengrößen bestimmt wurden.

---

---

We thank Dr. A. K. Galwey for reading the text and for valuable comments.     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Photoassisted NO reduction with NH3 over TiO2 photocatalyst

Photoassisted selective catalytic reduction of NO with ammonia (photo-SCR) at low temperature over irradiated TiO2 in a flow reactor was confirmed to proceed efficiently and the adsorbed ammonia reacted with NO under irradiation of TiO2.     

CpRuIIPF6/quinaldic acid-catalyzed chemoselective allyl ether cleavage. A simple and practical method for hydroxyl deprotection

A cationic CpRu(II) complex in combination with quinaldic acid shows high reactivity and chemoselectivity for the catalytic deprotection of hydroxyl groups protected as allyl ethers. The catalyst operates in alcoholic solvents without the need for any additional nucleophiles, satisfying the practical requirements of operational simplicity, safety, and environmental friendliness. The wide applicability of this deprotection strategy to a variety of multifunctional molecules, including peptides and nucleosides, may provide new opportunities in protective group chemistry. [structure: see text]     

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.     

Novel Host Compounds, 1,1′-Binaphthyl-2,2′-Dihydroxy-5,5′- and 6,6′-Dicarboxylic Acid, which Trap Guest Molecules Tightly in their Inclusion Crystals

The host compounds 1,1’-binaphthyl-2,2′-dihydroxy-5,5′-dicarboxylic acid (1) and 1,1′-binaphthyl-2,2′-dihydroxy-6,6′-dicarboxylic acid (2) have been synthesized, and their inclusion properties have been studied. Inclusion complexes formed by 1 and 2 with volatile guests such as acetone and methanol release the guests only at much higher temperatures than their boiling points. The crystal structures of the inclusion complexes have been determined from single crystal X-ray diffraction data and show different host lattices.