A highly sensitive spectrophotometric determination of beryllium with chromal blue G and cetyltrimethylammonium chloride

Chromal blue G in the presence of cetyltrimethylammonium chloride is proposed for the spectrophotometric determination of microgram amounts of beryllium. The sensitivity of color reaction between beryllium and chromai blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride (_626nm = 93,000). Beer's law is obeyed over the range 0.012–0.12 ppm of beryllium. Full color development occurs in 20 min at pH 5.5 and at 626 nm. The mole ratio of beryllium and chromai blue G in the complex is estimated to be 1:2. The proposed method is very sensitive and selective for determination of beryllium when EDTA is used as a masking agent.     

Phenomenological analysis of elongational flow birefringence in semidilute solutions of hydroxypropylcellulose

The relaxation time of a polymer chain in an elongational flow field was investigated for hydroxypropylcellulose (HPC) semidilute solution systems by two methods: phenomenological analysis of elongational flow-induced birefringence, and dynamic light scattering (DLS) and rheological measurements. To understand the relaxation time of an entangled semiflexible polymer solution in an elongational flow field, scaling analysis of the elongational flow-induced birefringence curve was performed. The results of both temperature and concentration scaling analyses showed that birefringence curves at different temperatures and at several HPC concentrations were described well by a universal birefringence–strain rate curve. This scaling behavior was compared with the "fuzzy cylinder" model. The critical strain rate corresponded to the correlation time of the slow relaxation mode determined by DLS measurement and the relaxation spectrum obtained by dynamic viscoelasticity measurement. The elongational flow-induced birefringence observed in an HPC semidilute solution was concluded to be attributed to the orientation of the HPC segment in the entangled molecular system, because the dominant relaxation mode is found to be the concentration fluctuation of an entangled molecular cluster in a quiescent state.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. II. p-vinylphenyl glycidyl ether: An epoxy-functionalized styrene

p-Vinylphenyl glycidyl ether (VPGE), a styrene derivative with an epoxy pendant, was polymerized by various cationic initiators, and its selective vinyl polymerization was investigated at low temperatures below ?15°C. BF₃OEt₂ (a metal halide) and CF₃SO₃H (a strong protonic acid) polymerized both vinyl and epoxy groups of VPGE, and produced cross-linked insoluble polymers. The HI/I₂ initiating system and iodine, in contrast, polymerized its vinyl group in polar solvents (CH₂Cl₂ and nitroethane) highly selectively in the temperature range of ?15 to ?40°C to give soluble polymers with a polystyrene backbone and epoxy pendants; however, under these conditions, 10–15% of the epoxy groups of the polymers were consumed during the polymerization by the reaction with the growing species. The polymerization by HI/I₂ in CH₂CI₂ involved a long-lived propagating species, as indicated by a progressive increase in the molecular weight (M?_n) of the polymers with monomer conversion and their fairly narrow molecular weight distributions (M?_w/M?_n ～ 1.6). The differences between the polymerizations of VPGE and p-isopropenylphenyl glycidyl ether, an α-methylstyrene-type counterpart of VPGE, were also discussed with an emphasis on the effects of the α-methyl group in the latter monomer.     

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

Cationic polymerization of p-methylstyrene initiated by acetyl perchlorate: An approach to living polymerization

The cationic polymerization of p-methylstyrene initiated by acetyl perchlorate at ?78°C led to long-lived (living-like) polymers with a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.4) in methylene chloride containing a common ion salt (n-Bu₄NClO₄) or in a less polar solvent (CH₂Cl₂/toluene, 1/4v/v). Under these conditions, the number-average molecular weight (M?_n) of the polymers increased in proportion to monomer conversion and was regulated by the monomer-to-initiator ratio. When fresh feeds of the monomer were repeatedly added to a completely polymerized solution, the polymerization ensued at the same rate as before and the linear increase in M?_n with monomer conversion continued. The effects of solvent polarity and the common ion salt on the polymerization showed the suppression of the ionic dissociation of the propagating species, resulting in a “nondissociated species,” to be the key factor for the formation of the long-lived polymers.     

Construction of optically active CF3-containing quaternary carbon centers via stereospecific S(N)2' reaction

[reaction: see text] Phosphates from 3-substituted 4,4,4-trifluorobut-2-en-1-ols were found to be effective for construction of CF3-containing quaternary carbon centers by way of Cu(I)-catalyzed Grignard reactions in the presence of catalytic amounts of CuCN and trimethylsilyl chloride (TMSCl) in an anti S(N)2' manner.     

A synthetic approach to (+)-aldosterone and its relatives (2)- a stereoselective synthesis of (+)-trans-4,5-(4-methoxybenzo)- 1β , 7aβ - ( 2α-methoxymethyl- 5 -oxofuro) hydrindane

A stereoselectivity in an intramolecular cycloaddition of the olefinic $\text{o}$-quinodimethanes 13 and 23 generated $\text{in}$$\text{situ}$ from the thermolysis of optically active 4β-[2-(4-methoxybenzocyclobutenyl)ethyl] -5α-methoxymethyl-3-phenyl-thio-methylenefuran-2-ones 12 and 22, respectively, is studied and a stereoselective synthesis of (+)-$\text{trans}$-4,5-( 4-methoxybenzo) -1β,7aβ-(2α-methoxymethyl-5-oxofuro)hydrindane 1 is also described.     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Further evidence of the vibronic coupling of pyrazine as revealed by preresonance raman effect

The excitation wavelength dependences of the intensities of the Raman lines of pyrazine have been measured. The intensity enhancement of the non-totally symmetric Raman line at 925 cm^?1 provided firm evidence of the vibronic coupling between the lowest ¹B_3u(n,π^*) and second lowest ¹B_2u(π,π^*) states. The excitation wavelength dependences of other non-totally symmetric Raman lines suggest also the various vibronic coupling schemes.     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148