Thermal effect in metamorphic rock around an intrusion zone with ESR studies

Hornfels, and intrusion rocks were studied with electron spin resonance (ESR) as a function of the distance from an intrusion zone in Mino Natural Park, Osaka, Japan. The temperature distribution in metamorphic rocks around an intrusion zone was calculated based on a simplified model of one-dimensional thermal conduction. The age as well as the thermal effect due to an intrusion rock were assessed using ESR signal intensities of paramagnetic defect centers (E’, oxygen-hole, and Al) in quartz grains. Geothermal heating effects are observable more than ten million years later for stable detects such as the E’ center.     

Preparation of adsorbents for affinity chromatography using TSKgel Tresyl-Toyopearl 650M

The optimum conditions for the coupling of proteins were investigated using TSKgel Tresyl-Toyopearl 650M. They were dependent on the proteins coupled. For example, when soybean trypsin inhibitor was coupled at pH 8 the coupling was completed within 1 h and the subsequent adsorption capacity for trypsin was maximal. Longer coupling times decreased the adsorption capacity due to multi-point attachment. The adsorbents obtained were successfully used for affinity chromatography in a short time.     

Synthetic scope and mechanistic studies of Ru(OH)x/Al2O3-catalyzed heterogeneous hydrogen-transfer reactions

Three kinds of hydrogen-transfer reactions, namely racemization of chiral secondary alcohols, reduction of carbonyl compounds to alcohols using 2-propanol as a hydrogen donor, and isomerization of allylic alcohols to saturated ketones, are efficiently promoted by the easily prepared and inexpensive supported ruthenium catalyst Ru(OH)x/Al2O3. A wide variety of substrates, such as aromatic, aliphatic, and heterocyclic alcohols or carbonyl compounds, can be converted into the desired products, under anaerobic conditions, in moderate to excellent yields and without the need for additives such as bases. A larger scale, solvent-free reaction is also demonstrated: the isomerization of 1-octen-3-ol with a substrate/catalyst ratio of 20,000/1 shows a very high turnover frequency (TOF) of 18,400 h(-1), with a turnover number (TON) that reaches 17,200. The catalysis for these reactions is intrinsically heterogeneous in nature, and the Ru(OH)x/Al2O3 recovered after the reactions can be reused without appreciable loss of catalytic performance. The reaction mechanism of the present Ru(OH)x/Al2O3-catalyzed hydrogen-transfer reactions were examined with monodeuterated substrates. After the racemization of (S)-1-deuterio-1-phenylethanol in the presence of acetophenone was complete, the deuterium content at the alpha-position of the corresponding racemic alcohol was 91%, whereas no deuterium was incorporated into the alpha-position during the racemization of (S)-1-phenylethanol-OD. These results show that direct carbon-to-carbon hydrogen transfer occurs via a metal monohydride for the racemization of chiral secondary alcohols and reduction of carbonyl compounds to alcohols. For the isomerization, the alpha-deuterium of 3-deuterio-1-octen-3-ol was selectively relocated at the beta-position of the corresponding ketones (99% D at the beta-position), suggesting the involvement of a 1,4-addition of ruthenium monohydride species to the alpha,beta-unsaturated ketone intermediate. The ruthenium monohydride species and the alpha,beta-unsaturated ketone would be formed through alcoholate formation/beta-elimination. Kinetic studies and kinetic isotope effects show that the Ru-H bond cleavage (hydride transfer) is included in the rate-determining step.     

Synthesis of photoreactive poly(ether ether ketone)s containing alkyl groups

Poly(ether ether ketone)s containing alkyl groups were prepared by nucleophilic substitution reaction of alkyl-substituted difluoro diaryl ethers with hydroquinone or by electrophilic substitution reaction of alkyl-substituted diaryl ether with 4,4′-oxydibenzoic acid in PPMA. Polycondensations proceeded smoothly and produced polymers having inherent viscosities up to 0.5-–1.6 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, and chloroform at room temperature. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight loses of the polymers were observed in the range above 450°C in nitrogen atmosphere. The glass transition temperatures of the polymers ranged from 128 to 146°C. Furthermore, Polymer 3b functioned as a photosensitive resist of negative type for UV radiation. The resist had a sensitivity of 42 mJ/cm² and a contrast of 2.5, when it was postbaked at 100°C for 10 min, followed by development with THF/acetone at room temperature. © 1996 John Wiley & Sons, Inc.     

Calibration of somatic cell count in milk based on near-infrared spectroscopy

A PLS model for prediction of somatic cell count (SCC) based on near-infrared (NIR) spectra of unhomogenized milk is presented in the study. Samples of raw milk were collected from cows in the early lactation period (from 7th to 29th day after parturition). The NIR spectra were measured in the region 400–1100 nm. As reference method a fluoro-opto-electronic method was applied. Different preprocessing methods were investigated. The robust version of PLS regression was applied to handle outliers present in the dataset and the uninformative variable elimination–partial least squares (UVE–PLS) method was used to eliminate uninformative variables. The final model is acceptable for prediction of SCC in raw milk.     

Improved Quantitative Dynamic Range of Time-of-Flight Mass Spectrometry by Simultaneously Waveform-Averaging and Ion-Counting Data Acquisition

Two different types of data acquisition methods, “averaging mode” and “ion-counting mode”, have been used in a time-of-flight (TOF) mass spectrometry. The most common method is an averaging mode that sums waveform signals obtained from each flight cycle. While it is possible to process many ions arriving at the same TOF in one flight cycle, low-abundance ions are difficult to measure because ion signals are overwhelmed by noises from the detection system. An ion-counting mode is suitable for the detection of such low-concentration ions, but counting loss occurs when two or more ions arrive at the detector within the dead time of the acquisition system. In this study, we introduce a technique that combines two methods to measure target ions with a high concentration difference, i.e., averaging mode and ion-counting mode are used simultaneously for high abundant and trace ions, respectively. By processing waveforms concurrently during data acquisition, one can choose to analyze either or both types of data to achieve a highly quantitative mass spectrum over a wide range of sample concentrations. The result of the argon isotope analysis shows that this method provides a more accurate determination of the isotope ratio compared to averaging mode alone at one-twentieth of the analysis time required by ion-counting alone.

Open image in new window

Graphical Abstract ?

     

Alternative spectrophotometric determination of niobium and tantalum with o-hydroxyhydroquinonephthalein in cationic surfactant micellar media

Summary The alternative and simultaneous spectrophotometric determination of niobium and tantalum was examined by using the colour development between o-hydroxyhydroquinonephthalein (Qnph) and niobium or tantalum in the presence of hexadecyltrimethylammonium chloride (HTAC) in strong acidic media. Beer's law was obeyed up to 10.0 g of niobium and up to 18.0 g of tantalum in a final volume of 10.0 ml. The apparent molar absorption coefficients for niobium and tantalum were 2.18×10⁵ and 2.09×10⁵ l mol^–1 cm^–1 with Sandell's sensitivities of 0.00042 g/cm² niobium at 520 nm and 0.00085 g/cm² tantalum at 510 nm, respectively. The alternative assay of niobium and tantalum was possible by using two methods: Method A — masking method with oxalic acid, Method B — acid adjusting-method using 50% sulfuric acid. These methods were 2–6-times more sensitive than other methods.Application of xanthene derivatives in analytical chemistry. Part XC. Part LXXXIX see ref [1]     

Stereoselective hetero Diels-Alder reaction of selenoaldehydes with pentavalent phosphole chalcogenides

Stereoselective hetero Diels-Alder reaction of selenoaldehydes, generated by thermal retro Diels-Alder reaction of anthracene cycloadducts, with pentavalent 3,4-dimethylphosphole chalcogenides at 110 °C in toluene to give the corresponding [4+2] cycloadducts as a single diastereoisomer in good yields, accompanied by a slight scrambling of chalcogen atoms. Higher reaction temperature led to an increase of the scrambling between chalcogen atoms.     

Yessotoxin analogues in several strains of Protoceratium reticulatum in Japan determined by liquid chromatography-hybrid triple quadrupole/linear ion trap mass spectrometry

Several strains of Protoceratium reticulatum, one of the dinoflagellates producing yessotoxins (YTXs), were collected from various shellfish producing areas in Japan. YTXs in the cultured strains were analyzed by liquid chromatography-mass spectrometry (LC-MS). Neutral loss scan monitoring, multiple reaction monitoring (MRM) for more than 20 YTX analogues, and full-scan MS/MS spectra obtained with a hybrid triple quadrupole/linear ion trap mass spectrometer showed that yessotoxin (YTX), 45,46,47-trinoryessotoxin (trinorYTX), 1-homoyessotoxin (homoYTX), and 45,46,47-trinor-1-homoyessotoxin (trinor-1-homoYTX) were the dominant toxins in these strains of P. reticulatum. Enone isomer of 42,43,44,45,46,47,55-heptanor-41-oxoyessotoxin (noroxoYTX enone) was also detected in some strains. Toxin profiles and contents were different among the strains. Some strains produced YTX, trinorYTX, 1-homoYTX, trinor-1-homoYTX, and noroxoYTX enone, whereas other strains produced only YTX or 1-homoYTX. This is the first identification of 1-homoYTX and noroxoYTX enone in P. reticulutum in Japan. Some strains did not produce any detectable YTX analogues.