Reversed-phase high-performance liquid chromatographic investigation of mucosal nucleosides and bases and urinary modified nucleosides of gastrointestinal cancer patients

Reversed-phase high-performance liquid chromatography (HPLC) was used to determine the levels of nucleosides, bases and their metabolites in perchloric acid extracts of gastrointestinal mucosa. By comparing the levels of these compounds in the normal portion with the neoplastic portion of mucosa resected from malignant cancer patients, it was found that there was significant elevation of the uracil level in the neoplastic mucosa of all eight patients with colorectal cancer (2.7-fold in normal mucosa), but only in the neoplastic mucosa of one out of four patients with gastric cancer. The levels of hypoxanthine and uridine in the colorectal cancer mucosa samples and the inosine in gastric cancer samples were also significantly higher than those in normal mucosa. The urinary modified nucleosides were prefractionated with a boronate affinity gel column, and their levels were determined by the same HPLC method. There was no significant difference in the concentrations of pseudouridine, 1-methylguanosine N2-methylguanosine and N2,N2-dimethylguanosine between urine samples taken before and after surgery from eight patients with malignant colorectal cancer. Contrary to other reports, no significant differences in modified nucleoside levels were observed between urine samples from patients with colorectal cancer and those from normal subjects.     

Radical Copolymerization of Vinylidene Chloride with 3(2-Methyl)-6-methylpyridazinone in Several Solvents

The radical copolymerization of vinylidene chloride (Vc, M₁) with 3(2-methyl)-6-methylpyridazinone (I, M₂) was carried out in benzene, ethanol, phenol, and acetic acid at 60 and 80°C. The monomer reactivity ratios were found to vary with the reaction conditions. The linear correlationships were obtained by plotting the values of log r₁ against those of ^V C[dbnd]O and ^V C[dbnd]C of monomers determined in the solvents.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.     

Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance

Phospholipid polymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)], was grafted with polyethylene (PE) membrane using photoinduced polymerization technique to make the membrane resistant to cell adhesion. The water contact angle on the PE membrane grafted with poly(MPC) decreased with an increase in the photopolymerization time. This decrease corresponded to the increase in the amount of poly(MPC) grafted on the PE surface. The same graft polymerization procedure was applied using other hydrophilic monomers, such as acrylamide (AAm), N-vinylpyrrolidone (VPy) and methacryloyl poly(ethylene glycol) (MPEG). These monomers were also polymerized to form grafted chains on the PE membrane, and the grafting was confirmed with X-ray photoelectron spectroscopy. Analysis of amount and distribution of plasma proteins at the plasma-contacting surface of the original and the modified PE membranes were analyzed using immunogold assay. The grafting of poly(MPC) and poly(VPy) on PE membrane reduced the plasma protein adsorption significantly compared with that on the original PE membrane. However, the PE membranes grafted with poly(AAm) or poly(MPEG) did not show any effects on protein adsorption. Platelet adhesion on the original and modified PE membranes from platelet-rich plasma was also examined. A large number of platelets adhered and activated on the original PE membrane. Grafting with poly(AAm) did not suppress platelet adhesion, but grafting with poly(MPC) or poly(VPy) on the PE membrane was effective in preventing platelet adhesion. It is concluded that the introduction of the phosphorylcholine group on the surface could decrease the cell adhesion to substrate polymer.     

Solid-State polymerization of the binary mixture of methacrylate and liquid-crystalline compound by electron beam

Solid-state polymerization of a binary mixture of nonliquid-crystalline monomer and liquidcrystalline compound was carried out using electron beam. The monomers were benzoic acid containing 4-[ω-(meth)acryloyloxyalkyloxy] benzoic acids, in which the alkylene spacer was ethylene, hexamethylene, or undecamethylene. The conversion yield of monomer to polymer to a large extent increased with increasing content of a liquid-crystalline compound with a terminal carboxylic group, such as 4-n-alkyloxybenzoic acid, while the addition of a liquid-crystalline compound without terminal carboxylic group did not affect polymerization of the monomer. Phase diagrams of the mixture of monomer and liquid-crystalline compound were examined using cross-polarizing microscopy and differential scanning calorimetry (DSC). All mixtures of monomer and 4-n-alkyloxybenzoic acid or liquid-crystalline compound without terminal carboxylic group showed liquid-crystallinity in a broad composition range. It was concluded that liquid-crystalline compounds with terminal carboxylic acid may form hydrogen bondings with methacrylate or acrylate monomer having terminal carboxylic acid which enhance polymerizability of the mixture. The stereoregularity of polymers determined by NMR depended on increasing irradiation dose and temperature rather than the content of the added liquid-crystalline 4-n-decanoxybenzoic acid.     

Electronic structure of magnetic and non-magnetic substitutional 3d transition metal impurities in germanium

The electronic structure around the ideal 3d transition metal impurities at substitutional site of germanium is calculated self-consistently within the local density formalism. Chemical trend of 3d impuritiy levels caused by the strong p-d hybridization, is revealed in the case of non-magnetic state. The magnetic state of the iron impurity is also presented and the local magnetic moment experienced by iron impurity is calculated to be 3.72μ_B.     

High-speed counter-current chromatography of apple procyanidins

Apple procyanidins were separated by high-speed counter-current chromatography using a type-J multilayer coil planet centrifuge. Several two-phase solvent systems with a wide range of hydrophobicities from a non-polar hexane system to polar n-butanol systems were evaluated their performance in terms of the partition coefficient and the retention of the phase. The best separation of procyanidins B and C was achieved with a two-phase solvent system composed of n-butanol-methyl tert.-butyl ether-acetonitrile-0.1% trifluoroacetic acid (2:4:3:8) using the lower phase as a mobile at a flow-rate of 1.0 ml/min.     

Synthesis and antiallergic activity of N-[4-(4-diphenylmethyl-1-piperazinyl)butyl]-1,4-dihydro-4-oxopyridine-3 - carboxamides

A new series of oxopyridinecarboxamide derivatives 3a--g and 5a were synthesized and evaluated for their antiallergic activity. 1,4-Dihydro-7-methyl-4-oxo-1,8-naphthyridine-3-carboxamides 3a and 5a exhibited potent antiallergic activity (inhibitory rates of 80.7 and 88.3%, respectively, at 20 mg/kg, p.o.) in the rat passive cutaneous anaphylaxis (PCA) test and also exhibited much more potent in vitro inhibitory activity than caffeic acid against the enzyme 5-lipoxygenase (5-LO). Their in vitro antihistamine activity, however, was weaker than that of ketotifen. Compounds 3a and 5a are viewed as promising candidates for antiallergic agents.