Synthesis and photovoltaic performance of donor–acceptor polymers containing benzo[1,2‐b:4,5‐b′]dithiophene with thienyl substituents

Three alternating donor–acceptor copolymers have been synthesized by Stille coupling polymerization of 2,6‐(trimethyltin)?4,8‐bis(5‐dodecylthiophene‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene with 1,3‐dibromo‐5‐hexylthieno[3,4‐c]pyrrole‐4,6‐dione, 4,7‐dibromo‐1,3‐benzothiadiazole, and 5,7‐dibromo‐2,3‐didodecylthieno[3,4‐b]pyrazine, respectively. The synthesized polymers were tested in bulk heterojunction solar cells as blends with the acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM). The thienopyrroledione copolymer displayed a power conversion efficiency of 3.00% which was increased to 3.86% by application of the additive 1,8‐diiodooctane (DIO). Tapping mode atomic force microscopy analysis indicated that there was an increase in the phase separation between polymer and PCBM, leading to an improvement in the performance upon the addition of DIO. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2622–2630     

DNA fuel for free-running nanomachines

We describe kinetic control of DNA hybridization: loop complexes are used to inhibit the hybridization of complementary oligonucleotides; rationally designed DNA catalysts are shown to be effective in promoting their hybridization. This is the basis of a strategy for using DNA as a fuel to drive free-running artificial molecular machines.     

Tensor LEED analysis for the electrodeposited Pt(1 1 1)-(3×3)–Ag,I surface structure

A crystallographic analysis is reported using low-energy electron diffraction (LEED) in the tensor LEED approach for the electrodeposited coadsorption (3×3) structure with 4/9 monolayer (ML) of silver and 4/9 ML of iodine on the Pt(1 1 1) surface. The structure approximates a two-layer slice of bulk AgI cut parallel to its (1 1 1) plane and superimposed on the substrate with the Ag atoms in contact with the topmost Pt(1 1 1) layer, and the I atoms forming an overlayer on the Ag atoms. There are two types of Ag atoms in the (3×3) unit mesh; one type bonds to a single Pt atom, while the other type bonds to three Pt atoms. The average Ag–Pt bond distances are close to 2.48 and 2.82 Å respectively for the one and three-coordinate Ag atoms, but both types of Ag atoms bond to three I atoms with an average Ag–I distance of 2.67 Å. No significant corrugation is observed for either the I layer or the Ag layer.     

A rapid measurement of : The DECPMG sequence

The Driven-Equilibrium Carr–Purcell Meiboom–Gill (DECPMG) pulse sequence is a rapid method for obtaining the average ratio of longitudinal to transverse relaxation times T₁/T₂ as a function of T₂. Since this is a one-dimensional experiment, the T₁/T_2T2 ratio can be acquired, potentially, in just two scans; the second scan being a reference CPMG measurement. Conventionally, T₁/T₂ is determined from a two-dimensional T₁-T₂ relaxation correlation experiment. The method described here offers a significant reduction in experimental time without a reduction in signal-to-noise. The T₁/T₂ ratio is useful for comparing the behaviour of liquids in porous media. Here we demonstrate the application of the DECPMG sequence to the study of oil-bearing rocks by differentiating oil or water saturated rock cores, and by observing the relative strengths of surface interaction for water in two types of rock by measuring T₁/T₂ as a function of magnetic field strength.     

Computational and experimental study of JP-8, a surrogate, and its components in counterflow diffusion flames

Non-sooting counterflow diffusion flames have been studied both computationally and experimentally, using either JP-8, or a six-component JP-8 surrogate mixture, or its individual components. The computational study employs a counterflow diffusion flame model, the solution of which is coupled with arc length continuation to examine a wide variety of inlet conditions and to calculate extinction limits. The surrogate model includes a semi-detailed kinetic mechanism composed of 221 gaseous species participating in 5032 reactions. Experimentally, counterflow diffusion flames are established, in which multicomponent fuel vaporization is achieved through the use of an ultrasonic nebulizer that introduces small fuel droplets into a heated nitrogen stream, fostering complete vaporization without fractional distillation. Temperature profiles and extinction limits are measured in all flames and compared with predictions using the semi-detailed mechanism. These measurements show good agreement with predictions in single-component n-dodecane, methylcyclohexane, and iso-octane flames. Good agreement also exists between predicted and measured variables in flames of the surrogate, and the agreement is even better between the experimental JP-8 flames and the surrogate predictions.     

Experimental validation of Fourier-transform wave-front reconstruction at the Palomar Observatory

Wave-front reconstruction with use of the Fourier transform has been validated through theory and simulation. This method provides a dramatic reduction in computational costs for large adaptive (AO) systems. Because such a reconstructor can be expressed as a matrix, it can be used as an alternative in a matrix-based AO control system. This was done with the Palomar Observatory AO system on the 200-in. Hale telescope. Results of these tests indicate that Fourier-transform wave-front reconstruction works in a real system. For both bright and dim stars, a Hudgin-geometry Fourier-transform method produced performance comparable to that of the Palomar Adaptive Optics least squares. The Fried-geometry method had a noticeable Strehl ratio performance degradation of 0.043 in the K band (165-nm rms wave-front error added in quadrature) on a dim star.     

MRI of the lung gas-space at very low-field using hyperpolarized noble gases

In hyperpolarized (HP) noble-gas magnetic resonance imaging, large nuclear spin polarizations, about 100,000 times that ordinarily obtainable at thermal equilibrium, are created in 3He and 129Xe. The enhanced signal that results can be employed in high-resolution MRI studies of void spaces such as in the lungs. In HP gas MRI the signal-to-noise ratio (SNR) depends only weakly on the static magnetic field (B(0)), making very low-field (VLF) MRI possible; indeed, it is possible to contemplate portable MRI using light-weight solenoids or permanent magnets. This article reports the first in vivo VLF MR images of the lungs in humans and in rats, obtained at a field of only 15 millitesla (150 Gauss).     

Calculations with the CNDO method on clusters of silver atoms

An attempt has been made to explore the applicability of the complete neglect of differential overlap (CNDO) method for investigating clusters of silver atoms. A new parametrization for silver has been obtained by comparing charge distributions, as well as local and total density of states, from CNDO calculations with those from the X_α scattered wave (X_αSW) method for an Ag₇ cluster which represents a fragment of the silver lattice. These parameters have then been used for making CNDO calculations on four further clusters of the same type, namely Ag₆, Ag₁₀, Ag₁₃ and Ag₁₉, and the results are compared with previous X_αSW calculations. These CNDO calculations give d-band widths in broad agreement with those from the X_αSW method. The most significant difference is that the CNDO method gives less localization on central atoms with high coordination numbers than is found from the X_αSW calculations. It is suggested that this apparent deficiency of the CNDO calculations may be less serious when the clusters are being used for modelling part of a solid metal rather than for specifically investigating the properties of small particles.     

Comparison of sample preparation methods for stable isotope analysis of dissolved sulphate in forested watersheds

Pretreatment methods for measuring stable sulphur (δ³⁴S) and oxygen (δ¹⁸O) isotope ratios of dissolved sulphate from watersheds have evolved throughout the last few decades. The current study evaluated if there are differences in the measured stable S and O isotope values of dissolved sulphate from forested watersheds when pretreated using three different methods: Method 1 (M1): adsorb sulphate on anion exchange resins and send directly to isotope facility; Method 2 (M2): adsorb sulphate on anion exchange resins, extract sulphate from anion exchange resins, and send the produced BaSO₄ to the isotope facility; and Method 3 (M3): directly precipitate BaSO₄ without anion exchange resins with the precipitates being sent to the isotope facility. We found an excellent agreement of the δ³⁴S_sulphate values among all the three methods. However, some differences were observed in the δ¹⁸O_sulphate values (M1 versus M2:?1.5 ‰; M1 versus M3:?1.2 ‰) associated with possible O contamination before isotope measurement. Several approaches are recommended to improve the pretreatment procedures for δ¹⁸O_sulphate analysis.