Synthesis and DNA binding studies of Ni(II), Co(II), Cu(II) and Zn(II) metal complexes of N1,N5-bis[pyridine-2-methylene]-thiocarbohydrazone Schiff-base ligand

The thiocarbohydrazone Schiff-base ligand with a nitrogen and sulphur donor was synthesized through condensation of pyridine-2-carbaldehyde and thiocarbohydrazide. Schiff-base ligands have the ability to conjugate with metal salts. A series of metal complexes with a general formula [MCl2(H2L)]·nH2O (MNi, Co, Cu and Zn) were synthesized by forming complexes of the N1,N5-bis[pyridine-2-methylene]-thiocarbohydrazone (H2L) Schiff-base ligand. These metal complexes and ligand were characterized by using ultraviolet-visible (UV-Vis), Fourier Transform Infrared (FT-IR), 1H and 13C NMR spectroscopy and mass spectroscopy, physicochemical characterization, CHNS and conductivity. The biological activity of the synthesized ligand was investigated by using Escherichia coli DNA as target. The DNA interaction of the synthesized ligand and complexes on E. coli plasmid DNA was investigated in the aqueous medium by UV-Vis spectroscopy and the binding constant (Kb) was calculated. The DNA binding studies showed that the metal complexes had an improved interaction due to trans-geometrical isomers of the complexes than ligand isomers in cis-positions.     

An efficient one-pot synthesis of carbazates and dithiocarbazates through the corresponding alcohols using Mitsunobu��s reagent

A novel Mitsunobu-based protocol has been developed for the synthesis of carbazates and dithiocarbazates through the variety of corresponding primary, secondary and tertiary alcohols and various kinds of substituted hydrazines using Mitsunobu??s reagent and CO₂/CS₂ system, in good to excellent yields.     

The effect of high dose of gamma-irradiation on residual radicals concentration in ultra-high molecular weight polyethylene (UHMWPE) in the presence of vitamin E

Powder samples of UHMWPE (GUR 1020) containing 0.1% by wt. vitamin E (??-tocopherol, ??-T) were irradiated at room temperature in air for doses of 30-kGy, 65-kGy or 100-kGy (⁶⁰Co). After irradiation, they were stored at ?78.5°C (dry ice temperature) for one year and then opened to air at room temperature. Following the decay of the primary alkyl and allyl radicals (at room temperature in air), growth of the carbon-centered polyenyl R1 (?^·CH?CH=CH?, m ?? 3), and the oxygen-centered dior tri-enyl R2 (?^·OCH?CH=CH? _m , m ?? 3) residual radicals were measured for eight weeks. An X-band electron spin resonance (ESR) spectrometer was used for radical measurements. The initial relative radical concentrations (R2/R1) were found to be 10.13, 4.6 and 3.7 for the 65-kGy, 30-kGy and 100-kGy samples, respectively. R1 and R2 were both found to grow significantly in the 65-kGy samples while they grew only slightly in the 30-kGy and 100-kGy samples. In 65-kGy sample, R1 grew faster than R2 and the relative concentration R2/R1 was reduced from 10.13 to 2.9 for the 65-kGy sample while that for the 30-kGy and 100-kGy samples reduced only slightly, from 4.6 to 3.5 and 3.7 to 3.2, respectively. The behavior of the residual radicals can be explained by Raman spectroscopic data which suggest that the 65-kGy samples had a higher percentage of amorphous regions when compared to the 30-kGy or 100-kGy (21.7% compared to 15.7% or 17.9%) and also suggest a lower percentage of inter-phase regions (16.4% compared to 25.6% or 17.5%) and a lower level of structural disorder (0.26% compared to 0.44% or 0.27%).     

Preparation of Cs2ZrO3 and Cs2ThO3 Through Sol-gel Method and Their Characterization

Cesium zirconate and cesium thorate were prepared by sol-gel method following citrate-nitrate route. The compounds were characterized by X-ray diffraction, chemical analysis and simultaneous TG-DTA. The methods of preparation of Cs₂ZrO₃ and Cs₂ThO₃ reported in literature involve difficult steps and require stringent experimental conditions for obtaining the compounds. In this work we report an easier method for the preparation of these compounds at relatively low temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Temperature-dependent vibrational spectroscopic studies of pure and gold nanoparticles dispersed 4-n-Hexyloxy-4’-cyanobiphenyls

Raman spectra of pure and 2 wt.% gold nanoparticles (GNPs) dispersed liquid crystalline compound 4-n-Hexyloxy-4?- cyanobiphenyls (6OCB) has been recorded as a function of temperature from room temperature (solid crystal) to 80°C (isotropic liquid) in the spectral region of 500–2500 cm^?1. The variation of Raman spectral parameters (peak positions and line width) with temperature is used to explain the changes in molecular alignment and its effect on inter-/intra-molecular interactions at crystal-Nematic (K-N) transition. To understand the change in molecular structure during phase transition and on account of dispersion of gold nanoparticles in pure liquid crystal more precisely, two spectral regions 1000–1500 cm^?1 and 1500–2400 cm^?1 have been selected separately. From the detailed study, it is concluded that increased orientational/vibrational freedom of the molecules as well as delocalisation of electron clouds results in the spectral anomalies at K-N transition. The geometrical structure of 6OCB was optimised using density functional theory (DFT) and theoretical Raman spectra have been obtained for comparison with experimental spectra. The tentative assignment of vibrational modes observed in our region of study was calculated based on potential energy distribution (PED) using vibrational energy distribution analysis (VEDA) calculation.     

Terminal Hydride Species in [FeFe]‐Hydrogenases Are Vibrationally Coupled to the Active Site Environment

A combination of nuclear resonance vibrational spectroscopy (NRVS), FTIR spectroscopy, and DFT calculations was used to observe and characterize Fe?H/D bending modes in CrHydA1 [FeFe]‐hydrogenase Cys‐to‐Ser variant C169S. Mutagenesis of cysteine to serine at position 169 changes the functional group adjacent to the H‐cluster from a ‐SH to ‐OH, thus altering the proton transfer pathway. The catalytic activity of C169S is significantly reduced compared to that of native CrHydA1, presumably owing to less efficient proton transfer to the H‐cluster. This mutation enabled effective capture of a hydride/deuteride intermediate and facilitated direct detection of the Fe?H/D normal modes. We observed a significant shift to higher frequency in an Fe?H bending mode of the C169S variant, as compared to previous findings with reconstituted native and oxadithiolate (ODT)‐substituted CrHydA1. On the basis of DFT calculations, we propose that this shift is caused by the stronger interaction of the ‐OH group of C169S with the bridgehead ‐NH‐ moiety of the active site, as compared to that of the ‐SH group of C169 in the native enzyme.     

Growth of Cyanobacteria: Optimization for Increased Carbohydrate Content

Growths of Lyngbya limnetica and Oscillatoria obscura were investigated at varying pH, light intensity, temperature, and trace element concentration with a view to optimize these parameters for obtaining the maximum carbohydrate content. The maximum growth for both strains was obtained at pH 9.0 and temperature 20 ± 3 °C using a light intensity of 68.0 μmol m^?2 s^?1 with continuous shaking. Growth under the nitrogen starvation condition affected the carbohydrate content more compared to the phosphorus starvation, and maximum concentrations were found as 0.660 and 0.621 g/g of dry biomass for L. limnetica and O. obscura, respectively. Under the optimized nitrogen-rich conditions, the specific growth rates for the two strains were found to be 0.187 and 0.215 day^?1, respectively. The two-stage growth studies under nitrogen-rich (stage I) followed by nitrogen starvation (stage II) conditions were performed, and maximum biomass and carbohydrate productivity were found as 0.088 and 0.423 g L^?1 day^?1 for L. limnetica. This is the first ever attempt to evaluate and optimize various parameters affecting the growth of cyanobacterial biomass of L. limnetica and O. obscura as well as their carbohydrate contents.     

One pot,three component 1,3 dipolar cycloaddition: Regio and diastereoselective synthesis of spiropyrrolidinyl indenoquinoxaline derivatives

A competent and highly discriminating one-pot synthesis of highly diversified novel functionalized indenoquinoxalone grafted spiropyrrolidine linked chromene-3-carbonitrile conjugates accumulating three pharmocophoric cores, heterocyclic indenoquinoxalone, pyrrolidines and chromene-3-carbonitrile in a single molecular framework by means of 1,3-dipolar cycloaddition reaction between indenoquinoxalone, proline/benzyl amine and chromene-3-carbonitrile in ethanol under classical and microwave conditions is described. The three component 1,3-dipolar cycloaddition reaction proceeds via in situ generation of azomethine ylides by the decarboxylative condensation of indenoquinoxalone with proline/benzyl amine and their selectivity towards the endo cyclic double bonds of dipolarophile (chromene-3-carbonitrile) leading to the formation of highly functionalised regio- and diastereoselective molecular hybrids. This methodology exemplifies the green chemistry protocol such as mild reaction conditions, high yields, one-pot procedure and operational simplicity.     

Site-selective C–H nitration of N-aryl-7-azaindoles under palladium(II) catalysis

The site-selective C–H nitration reaction of 7-azaindoles with t-butyl nitrite under palladium catalysis is described. This protocol provides an efficient method for the construction of ortho-nitrated N-aryl-7-azaindoles with excellent site-selectivity and functional group compatibility. The formed 7-azaindole derivatives can be readily transformed into 7-azaindoles containing an aniline functional group under palladium-catalyzed hydrogenation conditions.