Determination of selenium in infant foods using electrothermal atomic absorption spectrometry with direct slurry sample introduction

Slurry sampling electrothermal atomic absorption (SS ETAAS) was applied to the development of a sensitive and precise method for selenium determination in infant foods without sample pretreatment. Suspensions prepared in a medium containing 0.1% Triton X-100, 0.5 or 5% v/v concentrated HNO₃ were directly introduced into the furnace. The accuracy of the procedure was confirmed by analysis of a standard reference material and comparison with hydride generation atomic absorption spectrometric (HGAAS) procedure. The characteristic mass is 44 pg and detection limit 0.43 μg·l⁻¹.     

The Smearing Out of the Thermal Initial Conditions Created in a Planck Era

In this paper the quantum heat transport in a Planck gas in the presence of the potential (other than the thermal one) is investigated. The new quantum heat transport equation which generalizes our potential-free QHT is developed. The thermal wave solution of QHT for a Planck gas is obtained and a condition for distortionless propagation of thermal wave is formulated. It is argued that the initial conditions of the Beginning (i.e., at t=0) are smeared in the time scale of the Planck time.     

Solvation of bivalent transition metalcations. II. Heats of transfer of metal perchlorates between water and several amides

Heats of solution of acetonitrile, solvated or hydrated perchlorates, Mn(ClO₄)₂·6AN, Co(ClO₄)₂·6AN, Ni(ClO₄)₂·6AN, Cu(ClO₄)₂·4AN, Cu(ClO₄)₂·6H₂O, Zn(ClO₄)₂·6AN, and Zn(ClO₄)₂·6H₂O have been determined in NMF, DMF, DMA, and water. Complete or almost complete exchange of AN and water molecules in amides is inferred from the visible spectra determinations. The heats of transfer of perchlorate anion from water to DMA and NMF have been obtained from separately determined heats of solution of NaBPh₄, AsPH₄Cl·H₂O, NaClO₄, NaCl, and SiPh₄ in the respective solvents. The heats of transfer of cations from water to amides have been determined from the above data and the heats of solvation of cations using literature data for the heats of hydration.     

Experimental investigation on using the piezoelectric and electromagnetic vibration absorbers in milling

The paper presents an active control system that counteracts the development of chatter vibration. The vibration amplitude depends on the dynamic properties of the machine tool, cutting tool and work-piece. In the paper we analyze the case when the loss of machining stability is caused by the work-piece. The proposed active control system employs electromagnet or piezoelectric actuator to suppress vibration during milling. The active control introduces damping into the system, thereby raising the critical depth of cut and reducing forced vibration amplitude. It enables stable cutting under a much wider range of cutting parameters that for the uncontrolled system. Cutting tests are performed on JAFO FYN-50 machine with mill DIN 845 B-25 K-N HSS to demonstrate an effectiveness of the proposed systems.     

Biological activity of 5-aminolevulinic acid and its methyl ester after storage under different conditions

5-Aminolevulinic acid (ALA) is a natural precursor of protoporphyrin IX (PpIX) and heme in cells. Photodynamic therapy (PDT) utilizes a metabolic imbalance in cancer cells, leading to increased PpIX generation from exogenous ALA. Due to chemical instability of ALA in therapeutic concentrations at pH values larger than 5.0 and at high temperatures, it looses its activity by spontaneous dimerization to 2,5-dicarboxyethyl-3,6-dihydropyrazine (DHPY). ALA esters are now supplementing ALA in PDT, but little is known about their stability. We have studied the stability of ALA and its methyl ester (MAL) stored under different conditions (temperatures, pH values) by measuring their ability to generate PpIX. 100mM solutions of both compounds were found to be stable at pH 4 and at 4 degrees C. However, at pH 5.5 they lost almost 10% of the initial activity during 5days of storage at 4 degrees C. The fastest decay of ALA and MAL was seen at pH 7.4 and at 37 degrees C, and followed first order kinetics. At pH 7.4 and at 4 degrees C MAL lost its PpIX producing ability more slowly than at 37 degrees C. Our work shows that solutions should be prepared immediately before use and stored at low temperatures. The pH of stock solutions should not exceed 5.     

A one-pot synthesis of 2,3-dihydro-1H-pyrrolo[3,2-c]quinolines

A one-pot synthesis of the 2,3-dihydro-1H-pyrrolo[3,2-c]quinoline core from substituted 2-iodoanilines and 2,3-dihydro-1H-pyrrole was achieved using 10 mol % Pd(PPh₃)₄, and K₂CO₃ in 1,4-dioxane at 170 °C for 1 h in a microwave oven. This reaction can be carried out on a gram scale. The proposed mechanism involves a Heck-coupling reaction followed by intra-molecular Schiff base formation and double bond migration.     

Direct measurements of pore fluid density by vibrating tube densimetry

The densities of pore-confined fluids were measured for the first time by means of vibrating tube densimetry (VTD). A custom-built high-pressure, high-temperature vibrating tube densimeter was used to measure the densities of propane at subcritical and supercritical temperatures (between 35 and 97 °C) and carbon dioxide at supercritical temperatures (between 32 and 50 °C) saturating hydrophobic silica aerogel (0.2 g/cm(3), 90% porosity) synthesized inside Hastelloy U-tubes. Additionally, supercritical isotherms of excess adsorption for CO(2) and the same porous solid were measured gravimetrically using a precise magnetically coupled microbalance. Pore fluid densities and total adsorption isotherms increased monotonically with increasing density of the bulk fluid, in contrast to excess adsorption isotherms, which reached a maximum and then decreased toward zero or negative values above the critical density of the bulk fluid. The isotherms of confined fluid density and excess adsorption obtained by VTD contain additional information. For instance, the maxima of excess adsorption occur below the critical density of the bulk fluid at the beginning of the plateau region in the total adsorption, marking the end of the transition of pore fluid to a denser, liquidlike pore phase. Compression of the confined fluid significantly beyond the density of the bulk fluid at the same temperature was observed even at subcritical temperatures. The effect of pore confinement on the liquid-vapor critical temperature of propane was less than ~1.7 K. The results for propane and carbon dioxide showed similarity in the sense of the principle of corresponding states. Good quantitative agreement was obtained between excess adsorption isotherms determined from VTD total adsorption results and those measured gravimetrically at the same temperature, confirming the validity of the vibrating tube measurements. Thus, it is demonstrated that vibrating tube densimetry is a novel experimental approach capable of providing directly the average density of pore-confined fluids, and hence complementary to the conventional gravimetric or volumetric/piezometric adsorption techniques, which yield the excess adsorption (the Gibbsian surface excess).     

Rational design of small molecule inhibitors targeting the Rac GTPase-p67(phox) signaling axis in inflammation

The NADPH oxidase enzyme complex, NOX2, is responsible for reactive oxygen species production in neutrophils and has been recognized as a key mediator of inflammation. Here, we have performed rational design and in?silico screen to identify a small molecule inhibitor, Phox-I1, targeting the interactive site of p67(phox) with Rac GTPase, which is a necessary step of the signaling leading to NOX2 activation. Phox-I1 binds to p67(phox) with a submicromolar affinity and abrogates Rac1 binding and is effective in inhibiting NOX2-mediated superoxide production dose-dependently in human and murine neutrophils without detectable toxicity. Medicinal chemistry characterizations have yielded promising analogs and initial information of the structure-activity relationship of Phox-I1. Our studies suggest the potential utility of Phox-I class inhibitors in NOX2 oxidase inhibition and present an application of rational targeting of a small GTPase-effector interface.