Watt-class green-emitting laser modules using direct second harmonic generation of diode laser radiation

Large-area high-resolution displays, using a flying-spot to create the picture, require light sources in the red, green and blue wavelength range with a high optical output power and nearly diffraction limited beam. In this paper we present experimental results of high-brightness distributed Bragg reflector tapered diode lasers at 106x nm that can be used for single-pass second harmonic generation into the green. Based on these lasers we developed compact (2.5 cm³) green laser modules with an output power of 1W at 53x nm and an electro-optical conversion efficiency of about 5%. The output power stability is better than 2% and the wavelength stability is ±10 pm. The excellent beam quality M _?? ² < 2 of the green light allows operation in flying spot application systems. Furthermore, we estimate that our concept allows power scaling up to 2W by using nonlinear planar waveguide crystals and into the multi-watt level by spectral beam combining.     

Fast path and polarization manipulation of telecom wavelength single photons in lithium niobate waveguide devices

We demonstrate fast polarization and path control of photons at 1550?nm in lithium niobate waveguide devices using the electro-optic effect. We show heralded single photon state engineering, quantum interference, fast state preparation of two entangled photons, and feedback control of quantum interference. These results point the way to a single platform that will enable the integration of nonlinear single photon sources and fast reconfigurable circuits for future photonic quantum information science and technology.     

Volatile organic compounds from Centaurium erythraea Rafn (Croatia) and the antimicrobial potential of its essential oil

GC and MS were used for the analysis of Croatian Centaurium erythraea Rafn essential oil (obtained by hydrodistillation) and headspace (applying headspace solid-phase microextraction). The headspace contained numerous monoterpene hydrocarbons (the major ones were terpinene-4-ol, methone, p-cymene, γ-terpinene and limonene). Oxygenated monoterpenes were present in the headspace and oil, while 1,8-cineole, bornyl acetate and verbenone were present only in the headspace. High headspace percentages of toluene and naphthalene were found, followed by hemimellitene. Lot of similarities were observed with Serbian C. erythraea oil [neophytadiene (1.4%), thymol (2.6%), carvacrol (6.1%) and hexadecanoic acid (5.7%)], but different features were also noted such as the presence of menthol, menthone and phytone. The oil fractionation enabled identification of other minor compounds not found in total oil such as norisoprenoides, alk-1-enes or chromolaenin. The essential oil showed antimicrobial potential on Escherichia coli, Salmonella enteritidis, Staphylococcus aureus and Bacillus cereus. On the other hand, no antibacterial activity of the oil was observed on Pseudomonas fluorescens and Lysteria monocytogenes.     

Numerical Computation of Heat and Mass Transfer in Fluidized Beds with Liquid Injection

The goal of this work is the simulation of concentration and temperature distributions insides fluidized bed with a uniform liquid distribution. Further, a physically based 2D model is developed for the heat and mass transfer processes in fluidized beds with a spray nozzle. The model is a coupled and semi-linear system of convection-reaction-diffusion equations. We considered the numerical solution of these semi-linear partial differential equations with discrete boundary conditions using linear finite elements on an adaptive triangular grid in space and implicit methods in time. We present calculations using, semi implicit and implicit methods in time, and different solvers for solving the linear systems. The complex correlations of mass and liquid flow rates, mass transfer, heat transfer, drying, and transient two dimensional air humidity, air temperature, degree of wetness, liquid film temperature and particle temperature were simulated. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Multi-Hollow Surface Dielectric Barrier Discharge for Bacterial Biofilm Decontamination

The plasma-activated gas is capable of decontaminating surfaces of different materials in remote distances. The effect of plasma-activated water vapor on Staphylococcus epidermidis, methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli biofilm contamination was investigated on the polypropylene nonwoven textile surface. The robust and technically simple multi-hollow surface dielectric barrier discharge was used as a low-temperature atmospheric plasma source to activate the water-based medium. The germicidal efficiency of short and long-time exposure to plasma-activated water vapor was evaluated by standard microbiological cultivation and fluorescence analysis using a fluorescence multiwell plate reader. The test was repeated in different distances of the contaminated polypropylene nonwoven sample from the surface of the plasma source. The detection of reactive species in plasma-activated gas flow and condensed activated vapor, and thermal and electrical properties of the used plasma source, were measured. The bacterial biofilm decontamination efficiency increased with the exposure time and the plasma source power input. The log reduction of viable biofilm units decreased with the increasing distance from the dielectric surface.     

Analytical Uncertainty in Modern Quantitative TLC

JPC – Journal of Planar Chromatography – Modern TLC - Experiments and calculations show the importance of analytical management to reliable analytical results. A method with a...     

Modern Modelling Methods in Drying

Several modern modelling techniques are presented as tools for drying science and technology, namely pore networks, discrete element method and population balances. After first presenting results from their own research, the authors indicate what future contributions to a better understanding of the drying process at different levels—single porous particles, agitated and fluidised beds—may be expected.     

Electroactive chiral oligo- and polymer layers for electrochemical enantiorecognition

Different electrochemical response for the specular images of chiral probe molecules obtained in diastereomeric conditions provided by electrode functionalization with enantiopure electroactive oligo- or polymer layers.

1. Download : Download high-res image (97KB)
2. Download : Download full-size image