Study of chemoselective asymmetric hydrogenation of (1-bromo-1-alkenyl)boronic esters with iridium–PˆN complexes

In this paper we report the first chemoselective asymmetric hydrogenation of (1-bromo-1-alkenyl)boronic esters, which constitutes a new route to (α-bromoalkyl)boronic esters. The study demonstrates that excellent chemoselectivities along with full conversions can be obtained for hydrogenation of alkyl substituted derivatives with iridium–PˆN complexes. Moreover, acyclic alkyl derivatives afford (α-bromoalkyl)boronic esters in good enantioselectivities ranging from 64 to 73% ee. A cyclic alkyl derivative was obtained only in a nearly racemic form. The (1-bromo-1-alkenyl)boronic esters appear to be less reactive towards homogenous hydrogenation conditions than their chloro analogues as demonstrated by the higher catalyst loadings required to achieve full conversions for alkyl derivatives and lower conversions observed for the aryl substituted derivatives.     

Application of accelerated heteronuclear single quantum coherence experiments to the rapid quantification of monosaccharides and disaccharides in dairy products

Monosaccharides and disaccharides are important dietary components, but if insufficiently metabolized by some population subgroups, they are also linked to disease patterns. Thus, the correct analytical identification, quantification, and labeling of these food components are crucial to inform and potentially protect consumers. Enzymatic assays and high-performance anion-exchange chromatography with pulsed amperometric detection are established methods for the quantification of monosaccharides and disaccharides that, however, require long measuring times (60–180 min). Accelerated methods for the identification and quantification of the nutritionally relevant monosaccharides and disaccharides d -glucose, d -galactose, d -fructose, sucrose, lactose, and maltose were therefore developed. To realize this goal, the NMR experiments HSQC (heteronuclear single quantum coherence) and acceleration by sharing adjacent polarization (ASAP)-HSQC were applied. Measurement times were reduced to 27 and 6 min, respectively, by optimizing the interscan delay and applying non-uniform sampling. The optimized methods were used to quantify d -glucose, d -galactose, d -fructose, sucrose, and lactose in various dairy products. Results of the HSQC and ASAP-HSQC methods are equivalent to the results of the reference methods in terms of both precision and accuracy, demonstrating that these methods can be used to correctly analyze nutritionally relevant monosaccharides and disaccharides in short times.     

Exploring AuRh Nanoalloys: A Computational Perspective on the Formation and Physical Properties

We studied the formation of AuRh nanoalloys (between 20–150 atoms) in the gas phase by means of Molecular Dynamics (MD) calculations, exploring three possible formation processes: one-by-one growth, coalescence, and nanodroplets annealing. As a general trend, we recover a predominance of Rh@Au core-shell ordering over other chemical configurations. We identify new structural motifs with enhanced thermal stabilities. The physical features of those selected systems were studied at the Density Functional Theory (DFT) level, revealing profound correlations between the nanoalloys morphology and properties. Surprisingly, the arrangement of the inner Rh core seems to play a dominant role on nanoclusters’ physical features like the HOMO-LUMO gap and magnetic moment. Strong charge separations are recovered within the nanoalloys suggesting the existence of charge-transfer transitions.     

Timing performance of ZnO:Ga nanopowder composite scintillators

The implementation of nanocrystal‐based composite scintillators as a new generation of ultrafast particle detectors is explored using ZnO:Ga nanopowder. Samples are characterized with a spectral‐time resolved photon counting system and pulsed X‐rays, followed by coincidence time resolution (CTR) measurements under 511 keV gamma excitation. Results are comparable to CTR values obtained using bulk inorganic scintillators. Bringing the ZnO:Ga nanocrystal's timing performance to radiation detectors could pave the research path towards sub‐20 ps time resolution as shown in this contribution. However, an efficiency boost when placing nanopowders in a transparent host constitutes the main challenge in order to benefit from sub‐nanosecond recombination times. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Investigations of silicone breast implants with the NMR-MOUSE

Silicone breast implants are used for breast augmentation and breast reconstruction. The issues of concern associated with such implants are: (a) the quality control of each implant before implantation, and (b) the detection of implant bleeding after implantation. We have studied the use of the Nuclear Magnetic Resonance-MObile Universal Surface Explorer (NMR-MOUSE) for the nondestructive testing of (a) the quality of implant shells, and (b) changes in implant gel due to leakage of body fluid into the implant. Depth profiles measured nondestructively through implant shells at different positions of each implant by the Profile NMR-MOUSE assured good reproducibility of the quality and thickness of different shell layers. The leakage of implants upon rupture was mimicked by observing changes in the transverse NMR relaxation time of the implant gel upon ingress of physiological saline solution and safflower oil through the rupture. Results demonstrate that nondestructive testing with unilateral NMR is a potential method for use in the quality control of implants and for the screening of implants for rupture after implantation.     

Profiling of grape monoterpene glycosides (aroma precursors) by ultra‐high performance‐liquid chromatography‐high resolution mass spectrometry (UHPLC/QTOF)

A ‘suspect screening analysis’ method for grape metabolomics by ultra‐high performance‐liquid chromatography (UHPLC) and high‐resolution quadrupole‐time of flight (QTOF) mass spectrometry was recently developed. This method was applied to study grape monoterpene glycosides, the main grape aroma precursors. Since standard compounds were not available, they were tentatively identified by overlapping various analytical approaches, in agreement with the indications recommended in mass spectrometry (MS)‐based metabolomics. Accurate mass and isotopic pattern, MS/MS fragmentation, correlation between fragments observed and putative structures and between liquid chromatography coupled with mass spectrometry (LC/MS) and gas chromatography/mass spectrometry signals were studied. Seventeen monoterpene glycosides were identified without performing the hydrolytic artifacts commonly used to study these compounds which may affect sample profile. This is the first time that a detailed study of these aroma precursors has been carried out by direct LC/MS analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog

The thermal decomposition kinetics of a synthetic K–H₃O jarosite analog was determined from thermogravimetric analysis at various heating rates in air. A thermal decomposition mechanism was proposed based on X-ray analysis of partially decomposed material and distinct features observed during thermal decomposition analysis. The decomposition path is complex. The material was treated as a composite of K-jarosite, H₃O-jarosite, and a “vacancy component”. The evolution of (OH)^? and SO₃ from these individual components was modeled. The decomposition is broken into subreactions according to distinct features in the thermoanalytical measurements. The subreactions are arranged sequentially and in parallel according to the evolution of the participating phases. A set of associated apparent activation energies was determined using isoconversion analysis. Kinetic triplets were assigned to each subreaction. A reasonable match with the observed decomposition was achieved by varying pre-exponential factors.     

Evaluation of K–H3O jarosite as thermal witness material

The scope of this work was the assessment of thermo-oxidative deterioration, hydrothermal stability, and crystalline zone deterioration of some bookbinding leathers from some religious books published in XVIII century stored in Romanian libraries. In this purpose, the following thermal analysis methods were employed: thermogravimetry/derivative thermogravimetry (TG/DTG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The thermo-oxidative damage of investigated leathers was characterized by the rate of the first thermo-oxidation process put in evidence in TG/DTG curves recorded in static air atmosphere. The hydrothermal stability was characterized by shrinkage temperature determined by DSC analysis of leathers in water excess. The damage of the crystalline zone of leathers was determined by DSC in nitrogen flow and DMA analyses. The qualitative damage for each leather and each kind of degradation was evaluated using the criteria resulted by thermal analysis of a large number of collagen-based materials (pure collagens, new and old parchments and leathers). The obtained results could be used for finding the best possible methods for preservation and/or restoration of the investigated bookbinding leathers.     

Thermal properties and structure of (As2S3)100−x(Sb4S4)x glassy system

Thermal properties and structure of bulk glasses of (As₂S₃)_1?x(Sb₄S₄)_x system (x varies from 0 to 60 mol%) were studied by differential scanning calorimetry and Raman spectroscopy. It was found that with increasing Sb content the glasses can be sorted out to the three groups. The structure of glasses with x ≤ 10 is build-up mainly from AsS_3/2 pyramidal units and the well-known crystallization resistance of As₂S₃ can explain the reluctance of these undercooled liquids against crystallization. In glasses with a higher content of antimony, i.e., 10 < x ≤ 30 mol%, the vibration characteristics of As₄S₄ clusters appear. Undercooled melts of these glasses crystallize forming both β-As₄S₄ and high-temperature phases of Sb₂S₃. Structure of glasses with the highest antimony content (x > 30 mol%) is based on SbS_3/2 structural units significantly lowering stability of their undercooled melts from which only Sb₂S₃ crystallizes.     

Thermal properties and the structure of amorphous Sb2Se3 thin film

The amorphous Sb₂Se₃ film with a thickness ~0.9 µm was prepared by thermal evaporation and its composition was confirmed using an energy-dispersive X-ray analysis. The amorphous state was checked by an X-ray diffraction analysis. The optical gap E _g ^opt was determined to be 1.32 eV. The glass transition temperature could not be found by either a differential scanning calorimetry or a thermomechanical analysis. The film was crystallized and characterized using the quasi-isothermal method. The temperature dependence of the isobaric heat capacity was raised monotonously and no drop over the course of the crystallization was observed. The temperature-modulated thermomechanical analysis determined a temperature T = 133 °C which can be assumed to be the temperature of the structural reorganization beginning. Raman spectra of amorphous Sb₂Se₃ revealed that the vibrations of both the amorphous and crystalline phase are close to one other. Raman scattering revealed that both the short and the medium-range order of amorphous and crystalline phases are similar.