Chemical modification of the adeno-associated virus capsid to improve gene delivery

Gene delivery vectors based on adeno-associated virus (AAV) are highly promising due to several desirable features of this parent virus, including a lack of pathogenicity, efficient infection of dividing and non-dividing cells and sustained maintenance of the viral genome. However, the conclusion from clinical data using these vectors is that there is a need to develop new AAVs with a higher transduction efficiency and specificity for relevant target tissues. To overcome these limitations, we chemically modified the surface of the capsid of AAV vectors. These modifications were achieved by chemical coupling of a ligand by the formation of a thiourea functionality between the amino group of the capsid proteins and the reactive isothiocyanate motif incorporated into the ligand. This strategy does not require genetic engineering of the capsid sequence. The proof of concept was first evidenced using a fluorophore (FITC). Next, we coupled the N-acetylgalactosamine ligand onto the surface of the AAV capsid for asialoglycoprotein receptor-mediated hepatocyte-targeted delivery. Chemically-modified capsids also showed reduced interactions with neutralizing antibodies. Taken together, our findings reveal the possibility of creating a specific engineered platform for targeting AAVs via chemical coupling.

Bioconjugated AAV vectors, achieved by coupling of ligands on amino groups of the capsid, are of great interest for gene delivery. Chemical modifications can be used to enhance cell tropism and to decrease interactions with neutralizing antibodies.     

Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Morphological changes in never-dried kraft fibers under mechanical shearing

The modification of bleached never-dried cellulose fibers was studied under controlled compression and shearing conditions. Fibers were further treated in a high-intensity mixing device in low-consistency to determine if the fiber structure was weakened in the in-pad attrition. The difference between the development of the softwood and hardwood fibers was examined. The fiber properties were analyzed using a fiber morphology analyzer, fractional fiber analysis and an electron microscope. The results indicate that the shearing under the controlled compression at high consistency modified the softwood and hardwood fibers already at low-energy consumptions. The fiber length and width decreased, and the formation of curls and kinks was pronounced. However, the intensive mixing after in-pad attrition revealed that the fiber structure was not weakened under compression and shear forces; conversely, the fiber cell wall was more resistant for the intensive mixing. When comparing the results for hardwood and softwood fibers, the softwood fibers were more modified during in-pad attrition, whereas the fiber wall strengthening was more significant in the hardwood fibers.     

Saccharide-modified nanodiamond conjugates for the efficient detection and removal of pathogenic bacteria

The detection and removal of bacteria, such as E. coli in aqueous environments by using safe and readily available means is of high importance. Here we report on the synthesis of nanodiamonds (ND) covalently modified with specific carbohydrates (glyco-ND) for the precipitation of type 1 fimbriated uropathogenic E. coli in solution by mechanically stable agglutination. The surface of the diamond nanoparticles was modified by using a Diels-Alder reaction followed by the covalent grafting of the respective glycosides. The resulting glyco-ND samples are fully dispersible in aqueous media and show a surface loading of typically 0.1 mmol g(-1). To probe the adhesive properties of various ND samples we have developed a new sandwich assay employing layers of two bacterial strains in an array format. Agglutination experiments in solution were used to distinguish unspecific interactions of glyco-ND with bacteria from specific ones. Two types of precipitates in solution were observed and characterized in detail by light and electron microscopy. Only by specific interactions mechanically stable agglutinates were formed. Bacteria could be removed from water by filtration of these stable agglutinates through 10 μm pore-size filters and the ND conjugate could eventually be recovered by addition of the appropriate carbohydrate. The application of glycosylated ND allows versatile and facile detection of bacteria and their efficient removal by using an environmentally and biomedically benign material.     

The subtle effects of iron-containing metal surfaces on the reductive carbonylation of RuCl3

The use of iron-containing metal surfaces, Fe, Fe-Cr-alloy and stainless steel, for the synthesis of mixed metal Ru-Fe compounds has been studied. The studied process was reductive carbonylation of RuCl3 in the presence of a metal surface. Reactions were carried out in ethanol solutions under 10-50 bar carbon monoxide pressure at 125 degrees C using an autoclave. During the reaction the metal surface was oxidized, releasing iron into the solution and acting as a sacrificial source of iron. Under these conditions the corrosion of the metal surface was facile and produced a series of iron-containing species. In addition to the formation of most obvious iron(II) products, such as [Fe(H2O)6]2+ or [FeCl2(H2O)4] the use of the metal surface also provided a route to novel labile trinuclear [Ru2Cl2(mu-Cl)4(CO)6FeL2] (L = H2O, EtOH) complexes. The stability and reactivity of the [Ru2Cl2(mu-Cl)4(CO)6FeL2] complexes were further studied using computational DFT methods. Based on the computational results a reaction route has been suggested for the formation and decomposition of [Ru2Cl2(mu-Cl)4(CO)6FeL2].     

Structural studies of poly(N‐isopropylacrylamide) microgels: Effect of SDS surfactant concentration in the microgel synthesis

Thermoresponsive colloidal microgels were prepared by polymerization of N‐isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N‐methylenebisacrylamide, in water with varying concentrations (<CMC) of an anionic surfactant, sodium dodecylsulphate (SDS). Volume phase transitions of the prepared microgels were studied in D₂O by ¹H NMR spectroscopy including the measurements of spin–lattice (T₁) and spin–spin (T₂) relaxation times for the protons of poly(N‐isopropylacrylamide) (PNIPAM) at temperature range 22–50 °C. In addition, microcalorimetry, turbidometry, dynamic light scattering, and electrophoretic mobility measurements were used to characterize the aqueous microgels. As expected, increasing SDS concentration in the polymerization batch decreased the hydrodynamic size of an aqueous microgel. Structures with high mobilities at temperatures above the LCST of PNIPAM were observed in the microgels prepared with small amount of SDS, as indicated by the relaxation times of different PNIPAM protons. It was concluded that the high mobility at high temperatures is in connection to a mobile surface layer with polyelectrolyte nature and with high local LCST. High SDS concentration in the synthesis was observed to prevent the formation of permanent, solid PNIPAM particles. The results from different characterization methods indicated that PNIPAM microgels prepared in high SDS concentrations appear to be more homogeneously structured than their correspondences prepared in low SDS concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3305–3314, 2006     

Reactions of [Ru(CO)3Cl2]2 with aromatic nitrogen donor ligands in alcoholic media

The reactions of mono‐ and bidentate aromatic nitrogen‐containing ligands with [Ru(CO)₃Cl₂]₂ in alcohols have been studied. In alcoholic media the nitrogen ligands act as bases promoting acidic behaviour of alcohols and the formation of alkoxy carbonyls [Ru(N–N)(CO)₂Cl(COOR)] and [Ru(N)₂(CO)₂Cl(COOR)]. Other products are monomers of type [Ru(N)(CO)₃Cl₂], bridged complexes such as [Ru(CO)₃Cl₂]₂(N), and ion pairs of the type [Ru(CO)₃Cl₃]^? [Ru(N–N)(CO)₃Cl]⁺ (N–N = chelating aromatic nitrogen ligand, N = non‐chelating or bridging ligand). The reaction and the product distribution can be controlled by adjusting the reaction stoichiometry. The reactivity of the new ruthenium complexes was tested in 1‐hexene hydroformylation. The activity can be associated with the degree of stability of the complexes and the ruthenium–ligand interaction. Chelating or bridging nitrogen ligands suppresses the activity strongly compared with the bare ruthenium carbonyl chloride, while the decrease in activity is less pronounced with monodentate ligands. A plausible catalytic cycle is proposed and discussed in terms of ligand–ruthenium interactions. The reactivity of the ligands as well as the catalytic cycle was studied in detail using the computational DFT methods. Copyright © 2005 John Wiley & Sons, Ltd.     

Castor oil-based biopolyurethane reinforced with wood microfibers derived from mechanical pulp

Wood fibers with high lignin content show promise to function in numerous applications with advantageous properties if the fiber features are appropriately exploited. The present study introduces a new approach to disintegrate and disperse wood fibers from groundwood pulp (GWP) directly to polyol without additional solvent exchanges or chemical modifications. In comparison bleached chemical pulp with low lignin content was ground in the polyol, but only low consistency (1 wt%) operation was possible, whereas up to 5 wt% consistency with GWP was carried out with ease. The micron sized fibers in polyol were reacted with polymeric diphenylmethane diisocyanate to produce fiber reinforced biopolyurethane (bioPU) composites. The mechanical properties of the composites improved compared to reference bioPU showing 14.6% increase in Young’s modulus, 54.5% in tensile strength and 26.1% in strain at break. The tan δ peaks shifted to higher temperature from 5.5 to 10.4 °C when fibers up to 5.1 wt% were incorporated to bioPU. Overall, the bulk microfibers from GWP with low degree of processing were cost-effective reinforcements for bioPUs, which improved the qualities of the fabricated composites and showed good compatibility with polyurethane.     

Adsorption of bacteria and polycations on model surfaces of cellulose, hemicellulose and wood extractives studied by QCM-D

Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) were used as the tools to study the adsorption of bacteria onto surfaces of silica and polystyrene coated with materials related to papermaking. Cationic polyelectrolytes used as fixatives and retention aids in paper industry were found to promote irreversible adsorption of the ubiquitous white water bacterium, Pseudoxanthomonas taiwanensis, onto model surfaces of cellulose (pH 8). The high charged low molecular weight polyelectrolyte, poly(diallyldimethyl) ammonium chloride (pDADMAC) adsorbed to silica surface as a flat and rigid layer, whereas the low charged cationic polyacryl amide (C-PAM) of high molecular weight adsorbed as a thick and loose layer. AFM images showed that the polyelectrolytes accumulated as layers around each bacterial cell. In the presence of wood hemicellulose (O-acetyl-galactoglucomannan) the bacteria adsorbed massively, as large, tightly packed rafts (up to 0.05mm in size) onto the polystyrene crystal surface coated with wood extractives (pH 4.7). AFM and FESEM micrographs also showed large naked areas (with no bacteria) in between the bacterial rafts on the crystal surface. In this case, QCM-D only incompletely responded to the massiveness of the bacterial adsorption. The results indicate that cationic polymers can be used to increase the retention of bacteria from the process water onto the fibre web and that, depending on the balance between hemicelluloses and wood extractives and pH of the process waters, bacteria can be drawn from process waters onto surfaces.