Controlled polymerization of (meth)acrylamides by atom transfer radical polymerization

Controlled polymerization of (meth)acrylamides was achieved by ATRP using the initiating system methyl 2‐chloropropionate/CuCl/tris(2‐dimethylaminoethyl)amine. Linear increase of molecular weights with conversion and low polydispersity (M_w/M_n < 1.2) were obtained in toluene, at room temperature, when N,N‐dimethylacrylamide was used as a monomer. However, the polymerization reached limited conversion, which could be enhanced by increasing the catalyst/initiator ratio. The limited conversion is not due to the loss of the active chains, but rather to the loss of activity of the catalytic system.     

In Vitro Antioxidant,Antitumor and Photocatalytic Activities of Silver Nanoparticles Synthesized Using Equisetum Species: A Green Approach

The ethanolic extracts of three Equisetum species (E. pratense Ehrh., E. sylvaticum L. and E. telmateia Ehrh.) were used to reduce silver ions to silver nanoparticles (AgNPs). The synthesized AgNPs were characterized using UV-Vis spectrophotometry, Fourier Transform Infrared Spectroscopy (FTIR), Energy Dispersive X-ray (EDX), Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS) measurements. FTIR data revealed the functional groups of biomolecules involved in AgNPs synthesis, such as O-H, C-H, C=O, C-O, and C-C. EDX spectroscopy was used to highlight the presence of silver, while DLS spectroscopy provided information on the mean diameter of AgNPs, that ranged from 74.4 to 314 nm. The negative Zeta potential values (−23.76 for Ep–AgNPs, −29.54 for Es–AgNPs and −20.72 for Et–AgNPs) indicate the stability of the obtained colloidal solution. The study also focused on establishing the photocatalytic activity of AgNPs, which is an important aspect in terms of removing organic dyes from the environment. The best photocatalytic activity was observed for AgNPs obtained from E. telmateia, which degraded malachite green in a proportion of 97.9%. The antioxidant action of the three AgNPs samples was highlighted comparatively through four tests, with the best overall antioxidant capacity being observed for AgNPs obtained using E. sylvaticum. Moreover, the biosynthesized AgNPs showed promising cytotoxic efficacy against cancerous cell line MG63, the AgNPs obtained from E. sylvaticum L. providing the best result, with a LD₅₀ value around 1.5 mg/mL.     

A Simple HPLC/DAD Method Validation for the Quantification of Malondialdehyde in Rodent’s Brain

In the present study, a HPLC/DAD method was set up to allow for the determination and quantification of malondialdehyde (MDA) in the brain of rodents (rats). Chromatographic separation was achieved on Supelcosil LC-18 (3 μm) SUPELCO Column 3.3 cm × 4.6 mm and Supelco Column Saver 0.5 μm filter by using a mobile phase acetonitrile (A) and phosphate buffer (20 mM, pH = 6) (B). Isocratic elution was 14% for (A) and 86% for (B). The injection volume (loop mode) was 100 μL with an analysis time of 1.5 min. Flow rate was set at 1 mL/min. The eluted compound was detected at 532 nm by a DAD detector by keeping the column oven at room temperature. The results indicated that the method has good linearity in the range of 0.2–20 μg/g. Both intra- and inter-day precision, expressed as RSD, were ≤15% and the accuracies ranged between ±15%. The lower limit of quantification (LLOQ), stability, and robustness were evaluated and satisfied the validation criteria. The method was successfully applied in a study of chronic toxicology following different treatment regimens with haloperidol and metformin.     

Ultra-low background measurements of decayed aerosol filters

Aerosol samples collected on filter media were analyzed using HPGe detectors employing varying background-reduction techniques in order to experimentally evaluate the opportunity to apply ultra-low background measurement methods to samples collected, for instance, by the Comprehensive Test Ban Treaty International Monitoring System (IMS). In this way, realistic estimates of the impact of low-background methodology on the sensitivity obtained in systems such as the IMS were assessed. The current detectability requirement of stations in the IMS is 30 μBq/m³ of air for ¹⁴⁰Ba, which would imply ~10⁶ fissions per daily sample. Importantly, this is for a fresh aerosol filter. One week of decay reduces the intrinsic background from radon daughters in the sample allowing much higher sensitivity measurement of relevant isotopes, including ¹³¹I. An experiment was conducted in which decayed filter samples were measured at a variety of underground locations using Ultra-Low Background (ULB) gamma spectroscopy technology. The impacts of the decay and ULB are discussed.     

Polyimide-polydimethylsiloxane copolymers containing nitrile groups

A novel series of nitrile-containing polyimide-polydimethylsiloxane copolymers was prepared by polycondensation reaction of 4,4′-oxydiphthalic anhydride with a mixture of an aromatic diamine, namely 2,6-bis(3-aminophenoxy)benzonitrile, and bis(aminopropyl)oligodimethylsiloxane of controlled molecular weight, in different ratios. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidone, N,N-dimethylformamide as well as in less polar solvents such as chloroform, and can be cast from solution into thin flexible films. The inherent viscosity was in the range of 0.43-0.55 dL/g. The polymers showed good thermal stability, the decomposition temperature being above 430 °C. They exhibited a glass transition temperature in the range of 149-219 °C, with reasonable interval between glass transition temperature and decomposition temperature. The surface morphology was investigated by scanning electron microscopy. The water dynamic contact angles were measured by tensiometric method. The free surface energy was evaluated based on Owens and Wendt equation. A composite film based on a polyimide-polydimethylsiloxane copolymer and pyrite ash powder has been prepared and its nanoactuation has been investigated.     

Self‐healing of high elasticity block copolymers

A new route for adding self‐healing properties to soluble polymers is presented briefly. Self‐healing block copolymers (polystyrene‐block‐polybutadiene block‐polystyrene from Sigma‐Aldrich) were obtained by dissolving the polymer in a solvent that neither dissolves the microbubbles nor deactivate the Grubbs catalyst. The self‐healing block copolymer has been obtained by mixing the polymer, the solvent, the microbubbles filled with monomer (dicyclopentadiene), and the Grubbs' catalyst followed by the evaporation of the solvent. The structure of self‐healed high elasticity block copolymer has been investigated by optical and Scanning Electron Microscopy. Raman spectroscopy and mechanical data suggested that the block copolymer exhibits self‐healing features. Copyright © 2008 John Wiley & Sons, Ltd.     

Liouville and geodesic Ricci solitons

On a tangent bundle endowed with a pseudo-Riemannian metric of complete lift type two classes of Ricci solitons are obtained: a 1-parameter family of shrinking Liouville Ricci solitons if the base manifold is Ricci flat and a steady geodesic Ricci soliton if the base manifold is flat. A nonexistence result of geodesic Ricci solitons for the tangent bundle of a non-flat space form is also provided. To cite this article: M. Crasmareanu, C. R. Acad. Sci. Paris, Ser. I 347 (2009).     

Existence Theorems in the Geometrically Non-linear 6-Parameter Theory of Elastic Plates

In this paper we show the existence of global minimizers for the geometrically non-linear equations of elastic plates, in the framework of the general 6-parameter shell theory. A characteristic feature of this model for shells is the appearance of two independent kinematic fields: the translation vector field and the rotation tensor field (representing in total 6 independent scalar kinematic variables). For isotropic plates, we prove the existence theorem by applying the direct methods of the calculus of variations. Then, we generalize our existence result to the case of anisotropic plates.     

Conditional Monte Carlo method for dynamic systems with random properties

A method is developed for calculating moments and other properties of states X(t) of dynamic systems with random coefficients depending on semi-Markov processes ξ(t) and subjected to Gaussian white noise. Random vibration theory is used to find probability laws of conditional processes X(t)∣ξ(·). Unconditional properties of X(t) are estimated by averaging conditional statistics of this process corresponding to samples of ξ(t). The method is particularly efficient for linear systems since X(t)∣ξ(·) is Gaussian during periods of constant values of ξ(t), so that and its probability law is completely defined by the process mean and covariance functions that can be obtained simply from equations of linear random vibration. The method is applied to find statistics of an Ornstein-Uhlenbeck process X(t) whose decay parameter is a semi-Markov process ξ(t). Numerical results show that X(t) is not Gaussian and that the law of this process depends essentially on features of ξ(t). A version of the method is used to calculate the failure probability for an oscillator with degrading stiffness subjected to Gaussian white noise.     

Studies regarding the formation from metal nitrates and diol of NiM 2 III O4 spinels, inside a silica matrix

The present study deals with preparation and characterization of spinel mixed oxide systems NiM ₂ ^III O₄, where M^III?=?Fe^III, Cr^III. In order to obtain 50% NiFe₂O₄/50% SiO₂ and 50% NiCr₂O₄/50% SiO₂ nanocomposite, we have used a versatile route based on the thermal decomposition inside the SiO₂ matrix, of some particular precursors, coordination compounds of the involved M^II and M^III cations with dicarboxylate ligands. The ligands form in the redox reaction between metal nitrates mixture and 1,3-propanediol at the heating around 140?°C of the gels (tetraethylorthosilicate?Cmetal nitrates?C1,3-propanediol?Cwater). The as-obtained precursors, embedded in silica gels, have been characterized by FT-IR spectrometry and thermal analysis. Both precursors thermally decompose up to 350?°C leading to the formation of the corresponding metal oxides inside the silica matrix. X-ray diffraction of the annealed powders have evidenced the formation of NiFe₂O₄ starting with 600?°C, and NiCr₂O₄ starting with 400?°C. This behavior can be explained by the fact that, by thermal decomposition of the Fe(III) carboxylate at 300?°C, the spinelic phase ??-Fe₂O₃ is formed, which interacts with the NiO, forming the ferrite nuclei. By thermal decomposition of chromium carboxylate, a nonstoichiometric chromium oxide (Cr₂O_3+x ) is formed. In the range 380?C400?°C, Cr₂O_3+x turns into Cr₂O₃ which immediately interacts with NiO leading to the formation of nickel chromites nuclei inside the pores of silica matrix. Both spinels have been obtained as nanocrystalites homogenously dispersed as resulted from XRD and TEM data.