Controlled polymerization of (meth)acrylamides by atom transfer radical polymerization

Controlled polymerization of (meth)acrylamides was achieved by ATRP using the initiating system methyl 2‐chloropropionate/CuCl/tris(2‐dimethylaminoethyl)amine. Linear increase of molecular weights with conversion and low polydispersity (M_w/M_n < 1.2) were obtained in toluene, at room temperature, when N,N‐dimethylacrylamide was used as a monomer. However, the polymerization reached limited conversion, which could be enhanced by increasing the catalyst/initiator ratio. The limited conversion is not due to the loss of the active chains, but rather to the loss of activity of the catalytic system.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Polytriphenylamines synthesized by interfacial and microemulsion oxidative polymerization

Two triphenylamine-based polymers were successfully prepared by the interfacial and microemulsion oxidative polymerization of triphenylamine and 4-(diphenylamino)benzyl 2-bromo-2-methylpropanoate. Ammonium peroxodisulfate ((NH₄)₂S₂O₈) was used as a chemical oxidant and dichloromethane/water was used as a solvent. Sodium dodecyl benzene sulfonate was employed as a surfactant in the microemulsion system. Polytriphenylamines were characterized via Fourier transform infrared (FTIR) spectra and ¹H-NMR and UV–vis absorption spectroscopy. Molecular weights were determined by gel permeation chromatography and redox properties were studied by cyclic voltammetry. The surface morphology of thin polymer films was determined by atomic force microscopy.     

Aperiodic metal–organic frameworks

Metal–organic frameworks (MOFs) represent one of the most diverse structural classes among solid state materials, yet few of them exhibit aperiodicity, or the existence of long-range order in the absence of translational symmetry. From this apparent conflict, a paradox has emerged: even though aperiodicity frequently arises in materials that contain the same bonding motifs as MOFs, aperiodic structures and MOFs appear to be nearly disjoint classes. In this perspective, we highlight a subset of the known aperiodic coordination polymers, including both incommensurate and quasicrystalline structures. We further comment upon possible reasons for the absence of such structures and propose routes to potentially access aperiodic MOFs.

This perspective discusses progress and future directions in metal–organic frameworks with aperiodic structures. Reported quasicrystalline and incommensurate materials are presented, and pathways towards designing new such materials are provided.     

Characterisation of nickel–zinc ferrite/silica nanocomposites with low ferrite concentration obtained by an improved modified sol–gel method

The paper presents a study regarding the structure, morphology and magnetic behaviour of x% (Ni_0.65Zn_0.35Fe₂O₄)/(100 − x)% SiO₂ ferrimagnetic nanocomposites for low Ni–Zn ferrite concentration (x = 5, 10, 15, 20 and 30 mass percent) obtained by an improved modified sol–gel method. The obtained gels and nanocomposites have been characterized by fast Fourier transform-infrared (FT-IR) spectrometry, X-ray diffraction (XRD), transmission electron microscopy (TEM) and magnetic measurements (MM). The addition of a supplementary quantity of diol in the synthesis, corresponding to a molar ratio EG : TEOS = 1:1, and the control of the thermal treatment applied to the precursor xerogels tetraethylortosilicate (TEOS)–metal nitrates (MN)–ethylene glycol (EG) leads to fine (~2–9 nm), almost spherical Ni–Zn ferrite nanoparticles homogenously dispersed inside the amorphous SiO₂ matrix. TEM images reveal the fine nature and the narrow size distribution of the ferrite nanoparticles. Nanoparticles diameter increases with the ferrite concentration and with the annealing temperature. For all concentrations of ferrite in SiO₂ and all annealing temperature, we have obtained Ni_0.65Zn_0.35Fe₂O₄ ferrite as single phase (proven by XRD) in the amorphous silica matrix, only after a pre-treatment of synthesized gels, at 573 K, for 3 h. The magnetic behaviour of ferrite nanoparticles in quasi-static magnetic fields is very particular, depending on the annealing temperature and the ferrite content in silica matrix. We have obtained superparamagnetic behaviour for the nanocomposites, for a concentration of 30% ferrite in SiO₂ at high annealing temperature, of 1,273 K.     

Hydrogen bonding-based 3D supramolecular architecture of [Cu(CHA)2][TCM]·11H2O

Reaction of Na₄TCM (1) (H₄TCM = tetra[4-(carboxyphenyl)oxamethyl]methane) with [Cu(CHA)](ClO₄)₂ (2)(CHA = 1,3,6,8,11,14-hexaaz atricyclo[12.2.1.1.^8,11] octadecane) in a DMF-water mixture yields [Cu(CHA)]₂[TCM] (3). Structural analysis of [Cu(CHA)]₂[TCM]·11H₂O (3·11H₂O) by single crystal X-ray diffraction reveals strong copper-oxygen bonds between two complex cations and the tetraanion leading to a 3D coordination network (zwitterionic structure), consolidated through additional NH...O=C hydrogen bonding within the cation/anion association. The resulting coordination geometry around a copper atom is a distorted square pyramidal with an oxygen atom of the anionic ligand in the apical position. A 3D supramolecular network is developed in the crystal based only on NH...OC hydrogen bonds between the macrocyclic metallic tecton and the carboxylate groups of neighboring 3D coordinated (zwitterionic) moieties. The pseudotetrahedral TCM^4? tetraanionic ligand induces a diamondoid architecture formed of large distorted adamantanoid cages.      

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Electrically insulated molecular wires

This paper is an up-to-date mini-review based on literature data and own results regarding synthesis and properties of conducting (pseudo)rotaxane supramolecular structures. Conjugated polymers, such as polyarylene, polyheteroarylene, polyaniline, polyarylenevinylene or polyaryleneimine, were used as axle, while the macrocyclic components were cyclodextrins, cucurbiturils, cyclophanes or crown ethers. Properties of the supramolecular structure such as solubility, thermal or chemical stability, conductivity, etc. can be drastically modified by the inclusion of hydrophobic conjugated polymers inside the macrocycle, without any chemical modification. For instance, the photophysical properties (i.e. quantum yield of fluorescence and electroluminescence) of the supramolecular structures were enhanced when compared with uninsulated conjugated polymers. The doping process is also affected, because the access of a dopant to the conjugated chain is limited only to the uncovered domains of the conjugated chain.     

Self‐healing of high elasticity block copolymers

A new route for adding self‐healing properties to soluble polymers is presented briefly. Self‐healing block copolymers (polystyrene‐block‐polybutadiene block‐polystyrene from Sigma‐Aldrich) were obtained by dissolving the polymer in a solvent that neither dissolves the microbubbles nor deactivate the Grubbs catalyst. The self‐healing block copolymer has been obtained by mixing the polymer, the solvent, the microbubbles filled with monomer (dicyclopentadiene), and the Grubbs' catalyst followed by the evaporation of the solvent. The structure of self‐healed high elasticity block copolymer has been investigated by optical and Scanning Electron Microscopy. Raman spectroscopy and mechanical data suggested that the block copolymer exhibits self‐healing features. Copyright © 2008 John Wiley & Sons, Ltd.