Catalyst-free,aqueous and highly diastereoselective synthesis of new 5-substituted 1H-tetrazoles via a multi-component domino Knoevenagel condensation/1,3 dipolar cycloaddition reaction

An approach for the synthesis of new 5-substituted-tetrazoles via multi-component domino Knoevenagel condensation/1,3 dipolar cycloaddition reaction of carbonyl compounds, malononitrile and sodium azide in water without assistance of any catalyst has been reported. This general protocol provides a wide variety of 5-substituted 1H-tetrazoles in good yields under mild reaction conditions.     

Experimental technique for simultaneous measurement of absorption-, emission cross-sections, and background loss coefficient in doped optical fibers

We report a new simple technique for the simultaneous measurements of absorption-, emission cross-sections, background loss coefficient, and dopant density of doped optical fibers with low dopant concentration. Using our proposed technique, the experimental characterization of a sample Ge–Er-doped optical fiber is presented, and the results are analyzed and compared with other reports. This technique is suitable for production line of doped optical fibers.     

NaBH4/DOWEX(R)50WX4: A Convenient Reducing System for Fast and Efficient Reduction of Carbonyl Compounds to Their Corresponding Alcohols

The reduction of a variety of carbonyl compounds was efficiently carried out with NaBH₄/DOWEX(R)50WX4 system. The reactions were performed to give the corresponding alcohols derivatives in perfect yields in THF at room temperature. Reduction of acyloins and a‐diketones by this reducing system produced efficiently the corresponding vicinal diols. Also, the reduction of aldehydes over ketones has been accomplished successfully by this system. Regioselectivity of this system was also investigated with exclusive 1,2‐reduction of conjugated carbonyl compounds to their corresponding allylic alcohols in high to excellent yields.     

Enantioselective Diethylzinc Addition to Aromatic Aldehydes Catalyzed by Novel Ti(IV) Complex of Three-Dentate Chiral Sulfonamide Ligands

The synthesis of several novel three-dentate sulfonamide alcohol ligands is described, starting from camphorsulfonyl chloride. The influence of temperature and ligand structure on the asymmetric addition of dietylzinc to aromatic aldehydes has been studied. Enantioselectivities up to 76% have been obtained.     

Synthesis of Novel Chiral Ionic Liquid and Its Application in Reduction of Prochiral Ketones to the Corresponding Chiral Alcohols Using NaBH4

A novel chiral ionic liquid (CIL) based on nicotinium salt has been synthesized and used as an efficient asymmetric chiral catalyst for reduction of acetophenone derivatives with NaBH₄ in methanol at room temperature. The optically active alcohols were obtained in low to moderate enantiomeric excess in a short reaction time.     

Aluminum Chloride (Alcl3) Promotes Selective Oxidative Deprotection of Benzylic Trimethylsilyl and Tert- Butyldimethylsilyl Ethers to the Corresponding Carbonyl Compounds with Manganese Dioxide (Mno2)

Various types of trimethylsilyl and tert-butyldimethylsilyl ethers of primary and secondary benzylic alcohols could be selectively converted to their corresponding carbonyl compounds with MnO₂ in the presence of AlCl₃ in good to excellent yields.     

Ageing of surface treated thermoplastic polyolefins

Thermoplastic polyolefin panels were treated with a flame, flame & water, and accelerated thermo molecular adhesion process (ATmaP) treatment. XPS, contact angle and adhesion test (pull off) results were acquired over a one year period to determine the changes in the elemental composition, surface energy and adhesion strength respectively over time. All surface-treated thermoplastic polyolefin samples showed a sharp decline in adhesion strength up to an ageing period totalling 6 months. The decline in adhesion strength was correlated with a decline in the nitrogen-containing constituents and C–O functional groups at the surface and a decline in surface energy for the flame & water-treated sample. There was no significant change in adhesion strength for all samples for ageing periods greater than 6 months. ATmaP-treated thermoplastic polyolefin outperformed the other two surface treatments in adhesion strength tests due to ATmaP retaining nitrogen-based functional groups (mainly nitrogen oxides) over the year long study. This retention of functionality allowed for a slower ageing process for ATmaP-treated surfaces in comparison to the other surface treatments.     

In Silico and Experimental Characterization of Chimeric Bacillus thermocatenulatus Lipase with the Complete Conserved Pentapeptide of Candida rugosa Lipase

Lipases are one of the highest value commercial enzymes as they have broad applications in detergent, food, pharmaceutical, and dairy industries. To provide chimeric Bacillus thermocatenulatus lipase (BTL2), the completely conserved pentapeptide (¹¹²Ala-His-Ser-Gln-Gly¹¹⁶) was replaced with similar sequences (²⁰⁷Gly-Glu-Ser-Ala-Gly²¹¹) of Candida rugosa lipase (CLR) at the nucleophilic elbow region. For this purpose, three mutations including A112G, H113E, and Q115A were inserted in the conserved pentapeptide sequence of btl2 gene. Based on the crystal structures of 2W22, the best structure of opened form of the chimeric lipases were garnered using the MODELLER v9.10 software. The native and chimeric lipases were docked to a set of ligands, and a trial version of Molegro Virtual Docker (MVD) software was used to obtain the energy values. Docking results confirmed chimeric lipase to be better than the native lipase. Following the in silico study, cloning experiments were conducted and expression of native and chimeric btl2 gene in Pichia pastoris was performed. The native and chimeric lipases were purified, and the effect of these mutations on characteristics of chimeric lipase studied and then compared with those of native lipase. Chimeric lipase exhibited 1.6-fold higher activity than the native lipase at 55 °C. The highest percentage of both lipases activity was observed at 60 °C and pH of 8.0. The ion Ca²⁺ slightly inhibited the activity of both lipases, whereas the organic solvent enhanced the lipase stability of chimeric lipase as compared with the native lipase. According to the results, the presence of two glycine residues at the conserved pentapeptide region of this chimeric lipase (¹¹² Gly-Glu-Ser-Ala-Gly ¹¹⁶) may increase the flexibility of the nucleophilic elbow region and affect the enzyme activity level.     

Effect of Phosphate on Glucosamine Production by Ethanolic Fungus Mucor indicus

In this study, the effect of phosphorous compound concentration on the production of glucosamine by Mucor indicus was investigated. Changes in the yield of ethanol, the major metabolite of the fungus, were also followed besides. The alkali insoluble material of the biomass of the fungus mainly contained phosphates and polymers of glucosamine and N-acetyl glucosamine, i.e., chitin and chitosan. Yields of glucosamine (78–113 g/kg dry fungal biomass) and ethanol (200–370 g/kg glucose) were significantly affected by the phosphorous concentration. The results showed that lower concentrations of phosphorous favored the production of glucosamine while higher ethanol as well as biomass yields was obtained at higher concentrations. The best concentration was 0.5 g/l where glucosamine yield was 0.37 g/l (11 % of the biomass). At this phosphate concentration, ethanol and biomass yields were 360 and 76 g/kg glucose, respectively. On average, proteins comprised 51.5 % of the biomass. Glycerol was the second important metabolite during the fermentation by the fungus which appeared at lower yields (20–34 g/kg glucose).     

Ligandless-ultrasound-assisted emulsification microextraction followed by inductively coupled plasma-optical emission spectrometry for simultaneous determination of heavy metals in water samples

In this study, a simple and efficient method of ligandless-ultrasound-assisted emulsification microextraction (LL-USAEME) followed by inductively coupled plasma-optical emission spectrometry (ICP-OES) has been developed for simultaneous extraction, preconcentration and determination of manganese, cadmium, cobalt and nickel in water samples. In the proposed approach, tetrachloroethylene was selected as extraction solvent. The effect of important experimental factors such as volume of extraction solvent, pH, sonication time, salt concentration, and temperature was investigated by using a fractional factorial design (2^5?1) to identify important factors and their interactions. In the next step, a Box-Behnken design (BBD) was applied for optimisation of significant factors. The obtained optimal conditions were: 30?µL for extraction solvent, 12 for pH, 5?min for sonication time, and 5% w/v for salt concentration. The limits of detections (LODs) for Cd(II), Co(II), Mn(II) and Ni(II) were 0.20, 0.13, 0.21 and 0.28?µg?L^?1, respectively. Relative standard deviations (RSD, C?=?200.0?µg?L^?1, n?=?9) were between 3.4–7.5% and the calibration graphs were linear in the range of 0.25 to 1000.0?µg?L^?1 for Mn, 0.5–1000.0?µg?L^?1 for Co and Ni and 1.0–250.0?µg?L^?1 for Cd. The determination coefficients (R ²) of the calibration curves for the analytes were in the range of 0.993 to 0.999. The proposed method was validated by using two certified reference materials, and also the method was applied successfully for the determination of heavy metals in different real water samples.