Cobalt-promoted MoS2 nanosheets: A promising novel diesel hydrodesulfurization catalyst

MoS₂ has been commonly used as a catalyst in hydrodesulfurization (HDS) of petroleum cuts in crude oil refineries. In this study, the synthesis of unsupported MoS₂ and Co-promoted MoS₂ nanosheets produced from molybdenum oxide and thiourea is reported. The synthesized samples were characterized by using x-ray fluorescence, x-ray diffraction, Brunauer–Emmett–Teller (BET), temperature-programmed reduction, thermal gravimetric analysis, and transmission electron microscopy methods, and then they were utilized for HDS of diesel through a fixed-bed catalytic reactor. Results indicated that a cobalt promoter affected both the number and the performance of active sites of the molybdenum sulfides, and the activity of the promoted MoS₂ catalyst was consistently higher than that of the MoS₂ catalyst. More significantly, the activity of the promoted catalyst was slightly declined during 48 h continuous HDS reaction, which indicated the stability of this catalyst. Additionally, during 12 h of test run, the HDS activity of the promoted catalyst was about 60% higher than MoS₂ one.     

Antibacterial and antioxidant properties of phyto-synthesized silver nanoparticles using Lavandula stoechas extract

Due to environmentally friendly and cost- effective issues, biological methods for silver nanoparticles (AgNPs) synthesis are advantageous over chemical and physical ones. In this study, AgNPs synthesized using Lavandula stoechas extract as a reductant and its antioxidant capacity, antibacterial property and cytotoxicity effect were investigated. The phyto-synthesized AgNPs were characterized using various analyses such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD) as well as Fourier transform infrared (FT-IR). The prepared nanoparticles were spherical on shape with the size about 20–50 nm. Antibacterial studies through agar disk diffusion method confirmed the antibacterial potential of phyto-synthesized AgNPs toward two clinical Staphylococus aureus and Pseudomonas aeruginosa bacteria, although MTT assay demonstrated that S. aureus (MIC = 125 μg/ml) was more susceptible to AgNPs than P. aeruginosa (MIC = 250 μg/ml). Moreover, the cytotoxicity assay of phyto-synthezied AgNPs showed a low cytotoxic effect on RAW264 cell line at 62.5 μg/ml as an effective concentration. Also the considerable antioxidant capacity of the AgNPs confirmed through DPPH assay. Great antibacterial and antioxidant properties along with biocompatibility make the suggested phyto-synthesized AgNPs a great candidate for different biomedical applications including wound healing.     

Silver–palm pollen nanocomposite exhibits antiproliferative,antioxidant, and proapoptotic properties on MCF-7 breast cancer cells

The aim of the present study is to evaluate the antioxidant and proapoptotic effects of silver–palm pollen (Ag/PP) nanocomposite. The percentage of live cells after treatment with various concentrations of Ag/PP (0, 5, 10, 20, and 40 µM/mL) was determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) colorimetric assay. The antioxidant potential of Ag/PP was measured via the scavenging effects of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and molecular analysis. Apoptosis was assessed by morphological analysis, fluorescent dye, and flow cytometry, and its fundamental mechanism studied based on evaluation of Bax and Bcl2 gene expression. Ag/PP nanocomposite suppressed the viability of MCF-7 cells (dose and time dependently) and showed antioxidant properties. Morphological changes associated with cell death were observed in treated cells. Accumulation of dead cells in sub-G1 phase confirmed the occurrence of apoptosis in exposed cells. In addition, NPs induced cell death by altering Bcl-2 expression in MCF-7 cells. These results indicate that Ag/PP nanocomposite is an effective combination for removal of cancer cells by induction of apoptosis and could be useful for human health due to its antioxidant effects.     

Antioxidant potential assessment of phenolic and flavonoid rich fractions of Clematis orientalis and Clematis ispahanica (Ranunculaceae)

The antioxidant activities of crude extract fractions using Hexane, Chloroform, Ethyl Acetate, Butanol and Water of Clematis orientalis and Clematis ispahanica were investigated. 1,1-diphenyl-2-picryl-hydrazyl (DPPH) assay and the ferric reducing/antioxidant potential (FRAP) were used to evaluate the antioxidant capacity. The total phenolics were found to be 4.37–9.38 and 1.32–11.37 mg gallic acid equivalents (GAE)/g in different fractions for C. orientalis and C. ispahanica, respectively. The ethyl acetate fraction of C. orientalis and chloroform fraction of C. ispahanica showed the highest DPPH and FRAP activities at a concentration of 300 μg/mL. The predominant phenolic compounds identified by HPLC in C. orientalis were Resorcinol (603.5 μg/g DW) in chloroform fraction and Ellagic acid (811.7 μg/g DW) in chloroform fraction of C. ispahanica.     

(11)C] Carbon monoxide in selenium-mediated synthesis of (11)C-carbamoyl compounds

Using either amines, amino alcohols, or alcohols in selenium-mediated synthesis with [(11)C]carbon monoxide, 3 ureas, 6 carbamates, and 1 carbonate were labeled. Tetrabutylammonium fluoride ((TBA)F) was discovered to form a soluble and reactive complex with selenium and drastically increase the radiochemical yields. Of the selected carbamoyl compounds, one was a receptor ligand, one was an enzyme inhibitor, and one was a muscular relaxant pharmaceutical. The (11)C-target compounds were obtained in radiochemical yields ranging from low to almost quantitative and with specific radioactivity up to 1300 GBq/micromol. The radiochemical purity of the final products exceeded 98%. In one case, the corresponding (13)C-substituted compound was produced to verify the position of the (11)C-label. In a typical experiment starting with 16.4 GBq [(11)C]carbon monoxide, 7.0 GBq of LC-purified 5-phenyl-1,3-oxazolidin-[2-(11)C]-2-one was obtained within 20 min from start of the carbonylation reaction (84% decay-corrected radiochemical yield). The presented approach is an interesting alternative to the use of [(11)C]phosgene in labeling chemistry.     

Impedimetric sensing of uranyl ion based on phosphate functionalized cysteamine self-assembled monolayers

A phosphate functionalized cysteamine self-assembled monolayer based on gold electrode is designed for uranyl ion (UO₂²⁺) detection. The response of the modified electrode is studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The EIS data are approximated using constant phase element (CPE) model from which kinetic and analytical parameters are evaluated. Uranyl ion is recognized based on blocking effect against charge transfer between p-benzoquinone as a probe and the modified electrode. This effect is detected from linear variation of charge transfer resistance (R_ct) as a function of UO₂²⁺ concentration. From the analysis of the EIS data and approximated parameters, a method is developed for UO₂²⁺ determination based on impedimetric measurements.     

Flow injection chemiluminescence determination of sulfide by oxidation with N-bromosuccinimide and N-chlorosuccinimide

A rapid and sensitive flow injection chemiluminescence method is described for the determination of sulfide based on the chemiluminescence generated during its reaction with either N-bromosuccinimide (NBS) or N-chlorosuccinimide (NCS) in alkaline medium. The results of investigation of the sensitized and non-sensitized chemiluminescence reactions are presented. The emission intensity is greatly enhanced for both NBS- and NCS-sulfide chemiluminescence systems if dichlorofluorescein (for NBS-sulfide) and fluorescein (for NCS-sulfide) are presented in the reaction solutions. The methods were applied satisfactorily to the determination of sulfide in spring water samples.     

Caro's Acid–Silica Gel: An Efficient and Versatile Catalyst for the One-Pot Synthesis of Tetrahydrobenzo[b]pyran Derivatives

An efficient one-pot synthesis of tetrahydrobenzo[b]pyran is described. This involved the three-component reaction of aromatic aldehydes, molononitrile, and dimedone in the presence of a catalytic amount of Caro's acid supported on silica gel in ethanol/water under reflux.     

Development of air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent‐mediated Fe3O4@Cu–Fe–LDH for the determination of tramadol in biological samples

A simple method, air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent was developed for the preconcentration of tramadol in biological samples prior to gas chromatography–flame ionization detection. A new type of carrier liquid, supramolecular solvent based on a mixture of 1‐dodecanol and tetrahydrofuran was combined with layered double hydroxide coated on a magnetic nanoparticle (Fe₃O₄@SiO₂@Cu–Fe–LDH). The supramolecular solvent was injected into the solution containing Fe₃O₄@SiO₂@Cu–Fe–LDH in order to provide high stability and dispersion of the sorbent without any stabilizer agent. Air assisted was applied to enhance the dispersion of the sorbent and solvent. A number of analytical techniques such as Fourier transform‐infrared spectrometry, field emission scanning electron microscope, energy‐dispersive X‐ray spectroscopy and X‐ray diffraction measurements were applied to assess the surface chemical characteristics of Fe₃O₄@SiO₂@Cu–Fe–LDH nanoparticles. The effects of important parameters on the extraction recovery were also investigated. Under optimized conditions, the limits of detection and quantification were obtained in the range of 0.9–2.4 and 2.7–7.5 μg L^?1 with preconcentration factors in the range of 450–472 in biological samples. This method was used for the determination of tramadol in biological samples (plasma, urine and saliva samples) with good recoveries.