Pyrolysis-GC-MS reveals important differences in hydrolytic degradation process of wood flour and rice bran filled polylactide composites

Pyrolysis-GC-MS of polylactide (PLA) biocomposites before and after hydrolytic degradation revealed prominent differences in the hydrolytic degradation process of rice bran and wood flour filled biocomposites. The water uptake and mass loss for polylactide/wood flour composites were similar to that of plain PLA. Pyrolysis-GC-MS, however, showed that on prolonged ageing the hydrolysis of PLA led to increased wood flour concentration in the remaining biocomposite matrices. In contrast, the polylactide/rice bran composites exhibited larger water uptake and higher mass loss. Pyrolysis-GC-MS and FTIR analysis proved that the higher mass loss was caused by migration of rice bran from the composites. The type of natural filler could thus greatly influence the degradation process and/or the stability of the materials in aqueous or humid environments.     

Platinum Nanoparticles Stabilized by Cucurbit[6]uril with Enhanced Catalytic Activity and Excellent Poisoning Tolerance for Methanol Electrooxidation

Three sub‐10 nm platinum nanoparticles (PtNPs) with distinctive morphologies were developed by using cucurbit[6]uril (CB[6]) as stabilizing agent and support. Both the size and shape of the PtNPs were simultaneously controlled by tuning the reducing agents. The prepared NPs have been comprehensively characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, transmission electron microscopy, and cyclic voltammetry. On account of the presence of CB[6] and its unique structural features, the as‐prepared PtNPs are homogeneous in morphologies and exhibit higher activities toward methanol electrooxidation than commercial Pt/C. CB[6] has the ability to bind small molecules that can promote CO oxidation, therefore, all the three PtNPs showed enhanced poisoning tolerance. Such unique abilities of CB[6] can even promote the poisoning tolerance of commercial Pt/C through simple physical mixing.     

Liquid chromatography tandem mass spectrometry determination of total budesonide levels in dog plasma after inhalation exposure

A sensitive and selective method to quantify budesonide in dog plasma samples was developed and fully validated. Liquid–liquid extraction was followed by solid-phase extraction and liquid chromatography–tandem mass spectrometry with electrospray ionization. After reconstitution of the analytes in the mobile phase, samples were analysed by reversed-phase liquid chromatography with isocratic elution. d8-Budesonide was used as an internal standard, and characteristic transitions of d8-budesonide and budesonide were used for quantification. The method was validated with respect to selectivity, specificity, linearity, recovery, repeatability, reproducibility and limits of detection and quantification. The validated method was successfully applied to monitor the plasma levels of budesonide in dogs exposed to clinical doses of inhaled and intravenous drug.     

The subtle effects of iron-containing metal surfaces on the reductive carbonylation of RuCl3

The use of iron-containing metal surfaces, Fe, Fe-Cr-alloy and stainless steel, for the synthesis of mixed metal Ru-Fe compounds has been studied. The studied process was reductive carbonylation of RuCl3 in the presence of a metal surface. Reactions were carried out in ethanol solutions under 10-50 bar carbon monoxide pressure at 125 degrees C using an autoclave. During the reaction the metal surface was oxidized, releasing iron into the solution and acting as a sacrificial source of iron. Under these conditions the corrosion of the metal surface was facile and produced a series of iron-containing species. In addition to the formation of most obvious iron(II) products, such as [Fe(H2O)6]2+ or [FeCl2(H2O)4] the use of the metal surface also provided a route to novel labile trinuclear [Ru2Cl2(mu-Cl)4(CO)6FeL2] (L = H2O, EtOH) complexes. The stability and reactivity of the [Ru2Cl2(mu-Cl)4(CO)6FeL2] complexes were further studied using computational DFT methods. Based on the computational results a reaction route has been suggested for the formation and decomposition of [Ru2Cl2(mu-Cl)4(CO)6FeL2].     

Development of Counting Skills: Role of Spontaneous Focusing on Numerosity and Subitizing-Based Enumeration

Children differ in how much they spontaneously pay attention to quantitative aspects of their natural environment. We studied how this spontaneous tendency to focus on numerosity (SFON) is related to subitizing-based enumeration and verbal and object counting skills. In this exploratory study, children were tested individually at the age of 4-5 years on these skills. Results showed 2 primary relationships in children's number skills development. Performance in a number sequence production task, which is closely related to ordinal number sequence without reference to cardinality, is directly associated with SFON. Second, the association of SFON and object counting skills, which require relating cardinal and ordinal aspects of number, is mediated by subitizing-based enumeration. This suggests that there are multiple pathways to enumeration skills during development.     

Practical Method for 2‐Hydroxyphenylketimine Synthesis

A series of hydroxyphenylketimines, of which 15 are new, was synthesized in methanol at high temperature (200°C) using a sealed steel reactor. This reaction setup especially enhances the synthesis of 2‐hydroxyphenylketimines, with yields up to six times higher than those obtained with the conventional acid‐catalyzed method under refluxing conditions. In fact, some imines were achievable only by the autoclave method.     

Properties and Polymerization of Biodegradable Thermoplastic Poly(Ester-urethane)

Abstract

Aliphatic polyesters, such as poly(lactic acids), need high molecular weight for acceptable mechanical properties. This can be achieved through ring-opening polymerization of lactides. The lactide route is, however, relatively complicated, and alternative polymerization routes are of interest. In this paper we report the properties of a polymer made by a two-step process: first a condensation polymerization of lactic acid and then an increase of the molecular weight with diisocyanate. The end product is then a thermoplastic poly(ester-urethane). The hydroxylterminated prepolymer was made with condensation polymerization of L–lactic acid and a small amount of 1,4-butanediol. The polymerization was performed in the melt under nitrogen and reduced pressure. The preparation of poly(ester-urethane) was done in the melt using aliphatic diisocyanates as the chain extenders reacting with the end groups of the prepolymer. The polymer samples were carefully characterized, including preliminary degradation studies. The results indicate that this route to convert lactic acid into thermoplastic biodegradable polymer has high potential. Lactic acid is converted into a mechanically attractive polymer with high yield, which could make the polymer suitable for high volume applications. The mechanical properties of the poly(ester-urethane) are comparable with those of poly(lactides). Capillary rheometer measurements indicate that the polymer is processible both by injection molding and extrusion.     

Crystalline Hybrid Solid Materials of Palladium and Decamethylcucurbit[5]uril as Recoverable Precatalysts for Heck Cross‐Coupling Reactions

A series of M? Pd? Me₁₀CB[5] (M=Li, Na, K, Rb, and Cs; Me₁₀CB[5]=decamethylcucurbit[5]uril) hybrid solid materials have been successfully synthesized for the first time through a simple diffusion method. These as‐prepared hybrid solids have been applied as phosphine‐free precatalysts for Heck cross‐coupling reactions with excellent catalytic performance and good recyclability. In the processes of the catalytic reactions, the activated Pd^II species were released from the crystalline hybrid precatalysts and transformed into catalytically active Pd nanoparticles, which have been demonstrated as key to carry on the catalytic reactions for the recoverable precatalysts M? Pd? Me₁₀CB[5] (M=K, Rb, and Cs). It has also been rationalized that the introduction of different alkali metals afforded crystalline hybrid precatalysts with different crystal structures, which are responsible for their diversified stability and reusability presented in Heck reactions.     

Comparison of self-cleaning properties of three titania coatings on float glass

This work compares the self-cleaning properties of experimental TiO₂ and TiO₂-Ag coatings on float glass with a commercial self-cleaning glass. In the experimental surfaces, TiO₂ coating was applied to float glass via the sol-gel route, while TiO₂-Ag coating was applied by the liquid flame spray method, which deposits TiO₂-Ag composite nanoparticles on the surface. The effect of the coatings on the surface wettability and the activation time for achieving hydrophilicity was studied through water contact angle as a function of exposure time to UV light. The surface morphology was investigated by using scanning electron microscopy (SEM) and confocal optical microscopy. The photocatalytic activity of the coatings was examined with methylene blue and stearic acid degradation tests. Finally, the soil attachment to the surfaces was tested with a sebum-based model soil. The sol-gel TiO₂ coating became superhydrophilic within a few hours, while the activation time needed for the commercial titania coated glass was several days. The surface with the TiO₂-Ag nanoparticles did not show any marked changes in the water contact angle. The commercial titania coated and the sol-gel TiO₂ surfaces showed self-cleaning properties and clearly lower attachment of soil than the uncoated and TiO₂-Ag coated surfaces. The difference in the interaction of the surfaces with the organic contaminants was assumed to depend mainly on differences in the thickness of the coatings.