The effect of chemical and physical characteristics of spruce SEW pulps on enzymatic hydrolysis

Conifers, which are the most abundant biomass species in Nordic countries, USA, Canada and Russia, exhibit strong resistance towards depolymerization by cellulolytic enzymes. At present, it is still not possible to isolate a single structural feature which would govern the rate and degree of enzymatic hydrolysis. On the other hand, the forest residues alone represent an important potential for biochemical production of biofuels. In this study, the effect of substrate properties on the enzymatic hydrolysis of softwood was studied. Stem wood spruce chips were fractionated by SO₂–ethanol–water (SEW) treatment to produce pulps of varying composition by applying different operating conditions. The SEW technology efficiently fractionates different types of lignocellulosic biomass by rapidly dissolving hemicelluloses and lignin. Cellulose remains fully in the solid residue which is then treated by enzymes to release glucose. The differences in enzymatic digestibility of the spruce SEW pulp fibers were interpreted in terms of their chemical and physical characteristics. A strong correlation between the residual lignin content of SEW pulp and enzymatic digestibility was observed whereas cellulose degree of polymerization and hemicellulose content of pulp were not as important. For the pulps containing about 1.5 % (w/w) lignin, 90 % enzymatic digestibility was achieved at 10 FPU enzyme charge and 24 h of hydrolysis time.     

Quantitative detection of well-based DNA array using switchable lanthanide luminescence

In this report a novel wash-free method for multiplexed DNA detection is demonstrated employing target specific probe pairs and switchable lanthanide luminescence technology on a solid-phase array. Four oligonucleotide capture probes, conjugated at 3′ to non-luminescent lanthanide ion carrier chelate, were immobilized as a small array on the bottom of a microtiter plate well onto which a mix of corresponding detection probes, conjugated at 5′ to a light absorbing antenna ligand, were added. In the presence of complementary target nucleic acid both the spotted capture probe and the liquid-phase detection probe hybridize adjacently on the target. Consequently the two non-luminescent label molecules self-assemble and form a luminescent mixed lanthanide chelate complex. Lanthanide luminescence is thereafter measured without a wash step from the spots by scanning in time-resolved mode. The homogeneous solid-phase array-based method resulted in quantitative detection of synthetic target oligonucleotides with 0.32 nM and 0.60 nM detection limits in a single target and multiplexed assay, respectively, corresponding to 3× SD of the background. Also qualitative detection of PCR-amplified target from Escherichia coli is described.     

Trifluoromethanesulfonic acid as a catalyst for the formation of dansylhydrazone derivatives

Trifluoromethanesulfonic acid (TFMSA) is presented as a new, efficient catalyst in the pre-column fluorescent derivatization of the 3-ketosteroid budesonide with dansylhydrazine and compared to the commonly used catalyst trifluoroacetic acid. With TFMSA the derivatization reaction may be carried out at room temperature, with a considerably higher reaction rate compared to previously used acids. The chromatograms also show that TMFSA results in less formation of spurious peaks from the reagent. Derivatization of steroid solutions ranging from 0.5 to 64 μM could be performed using identical reaction conditions.     

Secondary nucleation and accessible surface in insulin amyloid fibril formation

At low pH insulin is highly prone to self-assembly into amyloid fibrils. The process has been proposed to be affected by the existence of secondary nucleation pathways, in which already formed fibrils are able to catalyze the formation of new fibrils. In this work, we studied the fibrillation process of human insulin in a wide range of protein concentrations. Thioflavin T fluorescence was used for its ability to selectively detect amyloid fibrils, by mechanisms that involve the interaction between the dye and the accessible surface of the fibrils. Our results show that the rate of fibrillation and the Thioflavin T fluorescence intensity saturate at high protein concentration and that, surprisingly, the two parameters are proportional to each other. Because Thioflavin T fluorescence is likely to depend on the accessible surface of the fibrils, we suggest that the overall fibrillation kinetics is mainly governed by the accessible surface, through secondary nucleation mechanisms. Moreover, a statistical study of the fibrillation kinetics suggests that the early stages of the process are affected by stochastic nucleation events.     

Kindergartners’ Spontaneous Focusing on Numerosity in Relation to Their Number-Related Utterances During Numerical Picture Book Reading

This study investigated the relationship between kindergartners’ Spontaneous Focusing on Numerosity (SFON) and their number-related utterances during numerical picture book reading. Forty-eight 4- to 5-year-olds were individually interviewed via a SFON Imitation Task and a numerical picture book reading activity. We expected differences in the frequency of number-related utterances during picture book reading between children with a higher SFON score, providing more number-related utterances, and children with a lower SFON score. Our results showed large inter-individual differences in both kindergartners’ SFON and the frequency of their number-related utterances during picture book reading, yet SFON was not related to the frequency of number-related utterances. This unexpected result is discussed in terms of its scientific, methodological, and educational implications.     

Coordination of pyridinethiols in gold(I) complexes

High-yield synthesis of gold(I) thionato complexes, bis(pyridine-2-thionato)gold(I) chloride (1) and bis(pyridine-4-thionato)gold(I) chloride (2), are described. According to their solid-state structures, a linear coordination of Au(I), equiplanar coordination of the ligands and two weak gamma-agostic interactions are found in both of these complexes despite of different relative positions of N and S atoms in the pyridinethionato ligands. Density functional theory calculations on 1 and 2 reproduce the observed X-ray structures. Even though the C-H...Au interactions of Au(I) and two pyridine moieties (2.83 and 2.88 A in 1 and 2.86 A in 2) are relatively weak, according to calculations they seem to provide further stabilization for the coordination and orientation of the ligands. In 1 the shortest Au...Au distances of 3.50 A indicate that aurophilic interactions, even though weak, are present in the solid state, whereas in 2 these interactions are absent.     

High actuation performance offered by simple diene rubbers

Dielectric elastomers are materials well known for their superior actuation behavior under applied electric field. The simplicity of material fabrication and clear working principle of dielectric elastomer actuators (DEAs) can offer various applications of dielectric elastomers. In this work, we have compared a number of different types of commercially available elastomers in terms of actuation performance. It was found that well‐known commercial rubbers like acrylonitrile‐butadiene rubbers (NBR) can offer higher actuation performance in DEAs than the frequently used dielectric elastomers, such as acrylic rubber and silicone. The acrylonitrile content of the NBR was found to play an important role in the dielectric and consequently actuation properties. More interestingly, we observed that addition of organic oil, such as dioctyl adipate, can greatly enhance the actuation performance. Copyright © 2016 John Wiley & Sons, Ltd.     

An alternative synthesis method for [Os(NN)(CO)(2)X(2)] complexes (NN = 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine; X = Cl, Br, I). Electrochemical and photochemical properties and behavior

A novel synthesis method is introduced for the preparation of [Os(NN)(CO)(2)X(2)] complexes (X = Cl, Br, I, and NN = 2,2'-bipyridine (bpy) or 4,4'-dimethyl-2,2'-bipyridine (dmbpy)). In the first step of this two-step synthesis, OsCl(3) is reduced in the presence of a sacrificial metal surface in an alcohol solution. The reduction reaction produces a mixture of trinuclear mixed metal complexes, which after the addition of bpy or dmbpy produce a trans(Cl)-[Os(NN)(CO)(2)Cl(2)] complex with a good 60-70% yield. The halide exchange of [Os(bpy)(CO)(2)Cl(2)] has been performed in a concentrated halidic acid (HI or HBr) solution in an autoclave, producing 30-50% of the corresponding complex. All of the synthesized trans(X)-[Os(bpy)(CO)(2)X(2)] (X = Cl, Br, I) complexes displayed a similar basic electrochemical behavior to that found in the ruthenium analog trans(Cl)-[Ru(bpy)(CO)(2)Cl(2)] studied previously, including the formation of an electroactive polymer [Os(bpy)(CO)(2)](n) during the two-electron electrochemical reduction. The absorption and emission properties of the osmium complexes were also studied. Compared to the ruthenium analogues, these osmium complexes display pronounced photoluminescence properties. The DFT calculations were made in order to determine the HOMO-LUMO gaps and to analyze the contribution of the individual osmium d-orbitals and halogen p-orbitals to the frontier orbitals of the molecules. The electrochemical and photochemical induced substitution reactions of carbonyl with the solvent molecule are also discussed.     

超高效液相色谱-串联质谱法测定鸡肉中4种蛋白酶抑制剂

建立了鸡肉中4种蛋白酶抑制剂（沙奎那韦、利托那韦、奈非那韦、茚地那韦）的超高效液相色谱-串联质谱（UPLC-MS/MS）检测方法。样品经30%（v/v）乙腈水溶液（含1%（v/v）三氯乙酸）振荡提取、混合型阳离子交换MCX柱净化,采用Luna^® C8色谱柱（150 mm×2 mm,3 μm）,以0.2%（v/v）甲酸水溶液（含5 mmol/L乙酸铵）和乙腈为流动相进行梯度洗脱,采用电喷雾电离（ESI⁺）源和多反应监测（MRM）模式检测。结果表明,在0.1~20.0 μg/L范围内,4种目标化合物呈良好的线性关系,相关系数（r²）大于0.99,方法的定量限（S/N=10）为0.20~0.90 μg/kg;鸡肉组织中4种目标化合物在1.0、2.0和10.0 μg/kg 3个水平下的平均加标回收率为69.0%~106.0%,日内和日间相对标准偏差（RSD）为2.2%~13.8%（n=6）和3.6%~14.6%（n=3）。该法简单、高效、灵敏、准确,可用于鸡肉中沙奎那韦、利托那韦、奈非那韦、茚地那韦残留量的测定。     

Disposable roll-to-roll hot embossed electrophoresis chip for detection of antibiotic resistance gene mecA in bacteria

We present a high-throughput roll-to-roll (R2R) manufacturing process for foil-based polymethyl methacrylate (PMMA) chips of excellent optical quality. These disposable, R2R hot embossed microfluidic chips are used for the identification of the antibiotic resistance gene mecA in Staphylococcus epidermidis. R2R hot embossing is an emerging manufacturing technology for polymer microfluidic devices. It is based on continuous feeding of a thermoplastic foil through a pressurized area between a heated embossing cylinder and a blank counter cylinder. Although mass fabrication of foil-based microfluidic chips and their use for biological applications were foreseen already some years ago, no such studies have been published previously.