Measurements of total and positronium-formation cross sections for the scattering of positrons by alkali atoms

We present a review of our recent measurements of total cross sections (Q _T's) for the scattering of positrons by Na, K, and Rb, and positronium-formation cross sections (Q _Ps's) for Na and K. For our total cross section measurements, a beam transmission technique has been used. For ourQ _Ps measurements, our approach involves setting upper and lower limits onQ _Ps using a combination of (1) measuring the transmission of the positron beam with the angular discrimination of the apparatus made as poor as possible, and (2) measuring the 511 keV annihilation gamma rays in coincidence produced by the decay of para-Ps formed in the scattering cell. Comparison with theoretical calculations shows that our measuredQ _T's andQ _Ps's for Na and K agree reasonably well with a close coupling approximation (CCA) calculation which takes into account the formation of Ps in then=1 andn=2 states. In the 3–10 eV energy range, this calculation predicts a peak in theQ _T's andQ _Ps's for K which also appears in our measurements. The absence of such a peak in our measuredQ _T's andQ _Ps's (preliminary) for Na in this energy range is also consistent with the same theory. Comparisons with five-state CCA calculations ofQ _T which do not take Ps-formation into account also show good agreement with our positron-Na, K, and RbQ _T measurements for energies above 20 eV, but show dramatic departures from our measurements below 10 eV for K and Rb.     

完全二部图Ka,b的迭线图L^m（Ka，b）的谱特征

本证明了当(a，b)不属于{(1，8)，(2，4)，(3，6)，(4，4)，(2s^2-s，2s^2 s))时，L^m(Ka,b)以谱为特征，其中a≤b，s≥2．     

微型网状结构支架的力学性能研究

冠状动脉支架为圆柱形微型网状结构，直径1mm，厚度0．1mm，长度10～16mm。在经皮冠状动脉介入PCI治疗中由球囊充气撑开到直径为2．5～3．5mm的支架，在血管内承受血管壁回弹压力。为了保持血液流通支架必须保持其几何圆形。这是一个结构弹塑性稳定性问题。但是目前国际上对于支架的力学性能质量指标主要以强度性能评定而不涉及支架屈曲性能是不妥的。本文对于支架的强度和屈曲性能进行了全面的理论分析和实验研究，自行研制了智能式电子检测仪成功地对微型网状结构支架的强度和屈曲性能实现了实测实验研究。由于微型支架的离散型网状结构的特点，在实验中出现一些特殊的屈曲现象。本文研究结果对于支架的形状与性能设计的改进和力学性能质量标准规范的制订具有重要意义。     

旋转带电体磁矩计算的若干法则与算例

本文在文献 [1]、[2 ]等的基础上给出关于旋转带电体的磁矩计算的若干法则 ,均以定理形式表达 ,并列表枚举其相关算例     

一种高温超导磁悬浮装置

本文介绍一个基于倒挂吸引式(EMS)原理的高温超导磁悬浮试验装置．这个装置由高温超导磁体、单臂梁金属导轨、位置传感器、控制电路等组成．绕制超导磁体线圈所用的是Bi-2223／Ag高温超导线材．超导磁体工作在激磁电流为3．2A时，在5mm的空气间隙中产生0．21T的磁通密度，与单臂梁金属导轨可产生72N的垂直悬浮力．通过引入压控电流源，利用常规的超前一滞后校正实现了该磁悬浮装置的稳定悬浮和鲁棒控制，在负载变化87．5%的情况下仍能实现超导磁悬浮装置的稳定悬浮．该试验装置首次验证了高温超导线圈的可控性问题，为进一步探索高温超导线圈用于磁悬浮轨道交通系统的可行性打下了基础．     

一类非线性弹簧振子的周期性振动

本文用数值计算的方法讨论了一类非线性弹簧振子的周期性振动及其特点．     

FDTD Method in the Analysis of Lithium Niobate Modulator

The Mach-Zehnder traveling-wave lithium niobate modulator is simulated by time domain finite difference (FDTD)method for different device geometry. The result is comparable to the reported value by finite element method.     

A new property of Bernstein-Kantorovi? operators

In the present paper, we prove that the Bernstein-Kantorovič operators have the ability of preserving translation property in both C and L^p norms. Supported (in part) by the NSFC(10471130,10371024) of PRC and the Natural Science Foundation (Y604003) of Zhejiang Province.     

Material-Adapted Design of Textile-Reinforced Composite Structures with Optimized Vibro-Acoustic and Damping Properties Including Shear Effects

Advanced analytical models have been developed at the ILK, which offer a possibility of calculating the vibro-acoustic and damping behavior of textile-reinforced composite shells and plates with account of shear effects. The simulation models elaborated have been verified on selected examples, and the analytical results were fully corroborated by accompanying numerical calculations for typical lay-ups.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 3, pp. 289–302, May–June, 2005.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.