Multidimensional gas chromatography for the characterization of permanent gases and light hydrocarbons in catalytic cracking process

An integrated gas chromatographic system has been successfully developed and implemented for the measurement of oxygen, nitrogen, carbon monoxide, carbon dioxide and light hydrocarbons in one single analysis. These analytes are frequently encountered in critical industrial petrochemical and chemical processes like catalytic cracking of naphtha or diesel fuel to lighter components used in gasoline. The system employs a practical, effective configuration consisting of two three-port planar microfluidic devices in series with each other, having built-in fluidic gates, and a mid-point pressure source. The use of planar microfluidic devices offers intangible advantages like in-oven switching with no mechanical moving parts, an inert sample flow path, and a leak-free operation even with multiple thermal cycles. In this way, necessary features such as selectivity enhancement, column isolation, column back-flushing, and improved system cleanliness were realized. Porous layer open tubular capillary columns were employed for the separation of hydrocarbons followed by flame ionization detection. After separation has occurred, carbon monoxide and carbon dioxide were converted to methane with the use of a nickel-based methanizer for detection with flame ionization. Flow modulated thermal conductivity detection was employed to measure oxygen and nitrogen. Separation of all the target analytes was achieved in one single analysis of less than 12 min. Reproducibility of retention times for all compounds were found to be less than 0.1% (n = 20). Reproducibility of area counts at two levels, namely 100 ppm_v and 1000 ppm_v over a period of two days were found to be less than 5.5% (n = 20). Oxygen and nitrogen were found to be linear over a range from 20 ppm_v to 10,000 ppm_v with correlation coefficients of at least 0.998 and detection limits of less than 10 ppm_v. Hydrocarbons of interest were found to be linear over a range from 200 ppb_v to 1000 ppm_v with correlation coefficients of greater than 0.999 and detection limits of less than 100 ppb_v.     

Photocatalytic E→Z Contra-Thermodynamic Isomerization of Vinyl Silanes with Lewis Base

Herein, we disclosed the contra-thermodynamic E→Z isomerization of alkenyl silanes, according to the in situ formation of a chromophoric species, in the presence of rac-BINAP as the catalyst. The reaction carried out in DMSO or CH₃CN under irradiation at 405 nm allowed the interconversion of the E-isomers into the Z-congeners in good to excellent yields and outstanding Z/E selectivities, on 18 examples. Finally, the mechanism of this E→Z isomerization was studied to get insight into the reaction mechanism.     

Long‐Wavelength Fluorescent Reporters for Monitoring Protein Kinase Activity

In vivo optical imaging must contend with the limitations imposed by the optical window of tissue (600–1000 nm). Although a wide array of fluorophores are available that are visualized in the red and near‐IR region of the spectrum, with the exception of proteases, there are few long wavelength probes for enzymes. This situation poses a particular challenge for studying the intracellular biochemistry of erythrocytes, the high hemoglobin content of which optically obscures subcellular monitoring at wavelengths less than 600 nm. To address this, tunable fluorescent reporters for protein kinase activity were developed. The probing wavelength is preprogrammed by using readily available fluorophores, thereby enabling detection within the optical window of tissue, specifically in the far‐red and near‐IR region. These agents were used to monitor endogenous cAMP‐dependent protein kinase activity in erythrocyte lysates and in intact erythrocytes when using a light‐activatable reporter.     

Effect of aspect ratio of vertically aligned copper nanowires in the presence of cellulose nanofibers on the thermal conductivity of epoxy composites

The composites comprising vertically aligned network of copper nanowires (CuNWs) in the presence of cellulose nanofibers were fabricated by using the freeze‐templating method and the effect of aspect ratio (A/R) of CuNWs on the thermal conductivity of epoxy composites was investigated. The thermal conductivity of epoxy composites increased to 0.79 W m^?1 K^?1 at 1.12 vol% of high A/R CuNWs loading, corresponding to the thermal conductivity enhancement of 365% as compared to the pure epoxy. The thermal conductivity of vertically aligned higher A/R CuNWs/epoxy, which is 38.5% and 51.9% higher than those of the lower A/R CuNWs and the randomly aligned CuNWs, respectively. The application of the epoxy composites in heat dissipation was demonstrated by the temperature changes of composites on a hot plate with the increase of heating time. These results indicate that the thermally conductive composites in this study could be applied for thermal dissipating materials in electronic devices.     

Cellulosic value-added products from sugarcane bagasse

Cellulose - Sugarcane bagasse (SCB) is a major by-product of the sugarcane industry and one of the most common renewable and sustainable cellulosic materials for various industrial...     

Combinatorial study of colored Hurwitz polyzêtas

A combinatorial study discloses two surjective morphisms between generalized shuffle algebras and algebras generated by the colored Hurwitz polyzêtas. The combinatorial aspects of the products and co-products involved in these algebras will be examined.     

Drop deposition of thin nanostructured coatings of lead telluride

The current-voltage relationships of deposited structures are measured for cluster structures consisting of nanoparticles of lead telluride. Variation in the value of the tunnel current is shown. Optimum conditions for the possible emergence of quantum-hopping conductivity due to carrier tunneling (the characteristic sizes of the nanoclusters and the distances between them) are determined.     

Nilpotency degree of cohomology rings in characteristic 3

The purpose of this note is to provide a -group whose mod-3 cohomology ring has a nilpotent element satisfying .