Improved Hydrogen‐Storage Thermodynamics and Kinetics for an RbF‐Doped Mg(NH2)2–2 LiH System

The introduction of RbF into the Mg(NH₂)₂–2 LiH system significantly decreased its (de‐)hydrogenation temperatures and enhanced its hydrogen‐storage kinetics. The Mg(NH₂)₂–2 LiH–0.08 RbF composite exhibits the optimal hydrogen‐storage properties as it could reversibly store approximately 4.76 wt % hydrogen through a two‐stage reaction with the onset temperatures of 80 °C for dehydrogenation and 55 °C for hydrogenation. At 130 °C, approximately 70 % of hydrogen was rapidly released from the 0.08 RbF‐doped sample within 180 min, and the fully dehydrogenated sample could absorb approximately 4.8 wt % of hydrogen at 120 °C. Structural analyses revealed that RbF reacted readily with LiH to convert to RbH and LiF owing to the favorable thermodynamics during ball‐milling. The newly generated RbH participated in the following dehydrogenation reaction, consequently resulting in a decrease in the reaction enthalpy change and activation energy.     

Development of a Sensitive Method for the Determination of 4‐(Methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in Human Urine Using Solid‐phase Extraction Combined with Ultrasound‐assisted Dispersive Liquid–liquid Microextraction and LC‐MS/MS Detection

An efficient and sensitive analytical method based on molecularly imprinted solid‐phase extraction (MISPE) and reverse‐phase ultrasound‐assisted dispersive liquid–liquid microextraction (USA‐DLLME) coupled with LC–MS/MS detection was developed and validated for the analysis of urinary 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a tobacco‐specific nitrosamine metabolite. The extraction performances of NNAL on three different solid‐phase extraction (SPE) sorbents including the hydrophilic‐lipophilic balanced sorbent HLB, the mixed mode cationic MCX sorbent and the molecularly imprinted polymers (MIP) sorbent were evaluated. Experimental results showed that the analyte was well retained with the highest extraction recovery and the optimum purification effect on MIP. Under the optimized conditions of MIP and USA‐DLLME, an enrichment factor of 23 was obtained. Good linearity relationship was obtained in the range of 5‐1200 pg/mL with a correlation coefficient of 0.9953. The limit of detection (LOD) was 0.35 pg/mL. The recoveries at three spiked levels ranged between 88.5% and 93.7%. Intra‐ and inter‐day relative standard deviations varied from 3.6% to 7.4% and from 5.4% to 9.7%, respectively. The developed method combing the advantages of MISPE and DLLME significantly improves the purification and enrichment of the analyte and can be used as an effective approach for the determination of ultra‐trace NNAL in complex biological matrices.     

Bismuth Trichloride–Catalyzed C‐Alkylation of Pyrroles with Electron‐Deficient Olefins

The BiCl₃‐catalyzed reaction of pyrroles with electron‐deficient olefins generated the corresponding Michael adducts in high yields.     

Synthesis of monodisperse oligocarbazoles-functionalized anthracenes with intense blue-emitting

New well-defined monodisperse oligocarbazoles-functionalized anthracenes An-OCZn (n = 1, 2, 3) have been synthesized through Suzuki cross-coupling reaction of the brominated oligocarbazoles and 9,10-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)anthracene. They show good solubility in organic solvents, including dichloromethane, chloroform, toluene, ethyl acetate, and tetrahydrofuran. It should be noted that, in the case of An-OCZn, the formation of the excimer based on anthracene unit is suppressed completely due to the introduction of oligocarbazoles in 9,10-position of anthracene so that an intense blue-emitting has been afforded. In addition, the obtained An-OCZn exhibit good electrochemical and thermal stabilities. Thus, the oligocarbazoles-functionalized anthracenes can be a class of promising candidates for novel blue-emitting materials employed in OLEDs or related devices.     

Synthesis of a novel sulfur-bearing secondary antioxidant with a high molecular weight and its comparative study on antioxidant behavior in polypropylene with two commercial sulfur-bearing secondary antioxidants having relatively low molecular weight

A novel sulfur-bearing secondary antioxidant with a high molecular weight of 2252 (OS-POSS), successfully synthesized via photoinitiated thiol-ene click reaction, was compared with two commercial sulfur-bearing secondary antioxidants on the stabilization of polypropylene (PP). The results of their oxidation induction time (OIT) via differential scanning calorimeter measurement (DSC) showed that the higher the molecular weight of secondary antioxidant is, the longer the OIT value, whether such sulfur-bearing antioxidant is used singly or in combination with primary antioxidant. The study of their long-term accelerated thermal aging in the air oven at 150 °C displayed that the molecular structure of sulfur-bearing secondary antioxidant, besides molecular weight, is another highly important factor determining the antioxidant efficiency, i.e., physical loss of antioxidants with the relatively low molecular weight may determine antioxidant efficiency, whereas thioether groups having neighboring ester carbonyl moieties may decompose more hydroperoxides with quicker rate.     

Computational gibberellin‐binding channel discovery unraveling the unexpected perception mechanism of hormone signal by gibberellin receptor

Gibberellins (GAs) are phytohormones essential for many developmental processes in plants. In this work, fundamental mechanism of hormone perception by receptor GID1 has been studied by performing computational simulations, revealing a new GA‐binding channel of GID1 and a novel hormone perception mechanism involving only one conformational state of GID1. The novel hormone perception mechanism demonstrated here is remarkably different from the previously proposed/speculated mechanism [Murase et al., Nature 2008 , 456, 459] involving two conformational states (“OPEN” and “CLOSED”) of GID1. According to the new perception mechanism, GA acts as a “conformational stabilizer,” rather than the previously speculated “allosteric inducer,” to induce the recognition of protein DELLA by GID1. The novel mechanistic insights obtained in this study provide a new starting point for further studies on the detailed molecular mechanisms of GID1 interacting with DELLA and various hormones and for mechanism‐based rational design of novel, potent growth regulators that target crops and ornamental plants. © 2013 Wiley Periodicals, Inc.     

Multiscale geometric modeling of macromolecules II: Lagrangian representation

Geometric modeling of biomolecules plays an essential role in the conceptualization of biolmolecular structure, function, dynamics, and transport. Qualitatively, geometric modeling offers a basis for molecular visualization, which is crucial for the understanding of molecular structure and interactions. Quantitatively, geometric modeling bridges the gap between molecular information, such as that from X‐ray, NMR, and cryo‐electron microscopy, and theoretical/mathematical models, such as molecular dynamics, the Poisson–Boltzmann equation, and the Nernst–Planck equation. In this work, we present a family of variational multiscale geometric models for macromolecular systems. Our models are able to combine multiresolution geometric modeling with multiscale electrostatic modeling in a unified variational framework. We discuss a suite of techniques for molecular surface generation, molecular surface meshing, molecular volumetric meshing, and the estimation of Hadwiger's functionals. Emphasis is given to the multiresolution representations of biomolecules and the associated multiscale electrostatic analyses as well as multiresolution curvature characterizations. The resulting fine resolution representations of a biomolecular system enable the detailed analysis of solvent–solute interaction, and ion channel dynamics, whereas our coarse resolution representations highlight the compatibility of protein‐ligand bindings and possibility of protein–protein interactions. © 2013 Wiley Periodicals, Inc.     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Noncovalent Functionalization of Multiwalled Carbon Nanotubes by Anionic Polymer Poly(Sodium 4‐Styrenesulfonate) in Water

We have found that polymer poly (sodium 4‐styrenesulfonate) (PSS) is a facile and effective polymer to assist in the dispersion of MWCNTs in aqueous solutions. With the increase of the concentration of PSS solutions, the dispersibility of MWCNTs in PSS solution increases. Cast films of MWCNTs/PSS (2 wt.%) on GC electrode show a typical redox couple at scan rate of 1 V/s in phosphate buffer solution, indicating good electrical conductivity.     

LiCoO2 Hollow Nanofibers by Co‐Electrospinning Sol‐Gel Precursor

LiCoO₂ xerogel hollow nanofibers were first prepared by co‐electrospinning the sol precursor, and the polycrystalline LiCoO₂ hollow nanofibers were obtained after calcination of the xerogel fibers. The obtained hollow nanofibers made up of 20～30 nm nanocrystals were about 100 nm to several micrometers in outer diameter. The hollow nanofibers were detected by means of SEM, TEM, TG, DSC, FTIR, and XRD techniques.