Self-induced phase matching in stimulated four-wave mixing in a nonbirefringent single-mode optical fiber

Self-induced phase matching in stimulated four-wave mixing in a nonbirefringent single-mode optical fiber has been observed. It is shown that in a nonbirefringent single-mode fiber the phase matching that is necessary for stimulated four-wave mixing can be accomplished with a combination of self-phase modulation and cross-phase modulation induced by a pump-laser pulse.     

强激光加载下金属材料微喷回收诊断

金属材料在冲击载荷下的动态响应在许多民用工程、航空航天等领域都有重要的应用背景.而金属材料在冲击载荷下的微喷形成过程,包括微射流、碎裂以及微层裂的物理过程的研究中尚存在许多空白.介绍了国内首次在神光Ⅲ原型激光装置上开展的金属材料微喷回收实验,实现了激光加载下低密度泡沫材料对微喷颗粒的回收,对回收样品进行了X光CT分析,通过图像重建,获得了回收微喷颗粒的三维图像,以及颗粒不同形态分布、颗粒尺寸、颗粒质量等定量结果.     

A concise and diversity-oriented strategy for the synthesis of benzofurans and indoles via Ugi and Diels-Alder reactions

A one-pot synthesis of diverse benzofurans and indoles from readily available starting materials was achieved via the sequential Ugi four-component reaction, intramolecular Diels-Alder reaction, and oxidative aromatization.     

Co‐Continuous Polymeric Nanostructures via Simple Melt Mixing of PS/PMMA

Blends of polystyrene/poly(methyl methacrylate) (PS/PMMA) (30/70) prepared by simple melt mixing form a droplet (PS) in‐matrix (PMMA) morphology. It is found that addition of a carefully designed copolymer PS‐b‐P(S‐ran‐MMA) (SSM) compatibilizer could convert the morphology into a co‐continuous system. Indeed, the continuity of the dispersed PS phase increased with an increase in PS‐b‐P(S‐ran‐MMA) content, and a fully co‐continuous morphology (continuity = 100%) was obtained at 20% SSM fraction with a characteristic size of 100 nm.

     

Cisplatin-induced alteration on membrane composition of A549 cells revealed by ToF-SIMS

Cisplatin has been clinically used for treatment of solid tumors such as non–small-cell lung cancer for decades. However, tumor resistance may be acquired with losing the antitumor activity of cisplatin. As cellular membrane is the first barrier that cisplatin has to overcome before its further action inside the cells, the membrane composition must play a vital role in the cisplatin uptake and excretion, which further influences cisplatin sensitivity. In this work, we applied time-of-flight secondary ion mass spectrometry (ToF-SIMS) surface analysis combined with principle component analysis to distinguish the differences of cell membrane composition between non–small-cell lung cancer cells (A549) and its cisplatin resistant counterpart A549/DDP cells. The decreased phosphatidylcholine content and more abundant cholesterol were observed in the drug resistant cell surfaces, indicating the decreased membrane fluidity of A549/DDP cells. Moreover, we further compared membrane composition of A549 and A549/DDP cells after being treated with different concentrations of cisplatin. A higher composition level of proteins was discovered on all groups of A549/DDP cell membranes. The altered surface chemistry of cellular membranes induced by cisplatin indicates the significance of membrane structures in the drug resistance, which deserves further investigations to this regard.     

金属醇盐法制备Ta2O5气凝胶

 以乙醇钽为前驱物,采用金属醇盐溶胶-凝胶技术,获得了Ta₂O₅湿凝胶,分析了不同条件下的溶胶-凝胶过程,并初步探讨了凝胶过程机理。Ta₂O₅的溶胶-凝胶过程主要受到水量、催化剂用量及钽源浓度等因素的影响：体系在强酸性条件下凝胶,且随着酸性的增强,体系凝胶时间明显缩短;当水量较少时,凝胶时间随水量的增加而增加,但当水量增加到一定程度时,体系凝胶时间基本不变;实验证明,通过增大溶剂用量,体系凝胶时间延长,气凝胶理论密度降低。通过对溶胶-凝胶过程的控制,结合超临界干燥技术,获得了密度低至44 mg/cm³的Ta₂O₅气凝胶样品。     

高分辨力哈特曼传感器的快速波面重构和拼接

建立哈特曼传感器的模型,证明在高空间分辨力下,可以采用Hudgin模型进行波面重构,避免了采用Fried模型带来的复杂性。对哈特曼子孔径缺失破坏连续性的问题进行了分析,介绍了相应的边缘处理算法。完成了基于离散傅里叶变换的波面重构算法数值模拟,实现了波面的无损重构。针对实际应用中输入波面在被遮挡处不连续的问题,提出了基于最小二乘解的拼接方案,实现了非连续波面拼接。分析了影响波面重构速度的主要因素,提出了提高波面重构性能的方法。     

基于结构化光纤Bragg光栅的折射率梯度传感器研究

研究结构化光纤Bragg光栅(FBG)在折射率(RI)呈线性分布的液相介质环境下的响应特性。数值仿真结果表明,结构化FBG的反射谱特性强烈依赖于液相介质折射率(RI)的线性分布函数的某些特征参数,比如液相介质的RI沿FBG轴向的分布梯度、RI在FBG两端的差值等。基于理论仿真结果,建立了结构化FBG在低RI区(1.330～1.360)对液相介质的RI梯度进行测量的线性近似理论模型。通过相关实验研究,证明了理论仿真和分析的合理性及基于结构化FBG的RI梯度传感器在现实应用中的可行性。     

曲面钣金件伸长翻边数值与解析研究

采用弹塑性大变形有限元方法研究了几何形状和材料参数对"V"型零件翻边的影响; 同时基于全量塑性理论及膜应变假定,推导了轴对称情况(管形件翻边)的解析计算模型,通过与有限元结果的比较,分析了解析模型的适用性.     

Dynamic compressive responses of intact and damaged ceramics from a single split Hopkinson pressure bar experiment

A novel dynamic compressive experimental technique has been developed based on a split Hopkinson pressure bar. This new method dynamically loads the ceramic specimen by two consecutive stress pulses. The first pulse determines the dynamic response of the intact ceramic materiaal and then crushes the specimen, and the second pulse determines the dynamic compressive constitutive behavior of the ceramic rubble. Precise pulse shaping ensures that the specimen deforms at nearly constant strain rates under dynamic stress equilibrium during the loading by both stress pulses. Pulse shaping also controls the amplitudes of loading pulses, the values of strain rates, the maximum strains in the rubble specimens, and the proper separation time between the two loading pulses. The feasibility of the new technique is demonstrated by the experimental results obtained on an AD995 alumina.