Analytical solutions for two heteronuclear atoms in a ring trap

We consider two heteronuclear atoms interacting with a short-range δ potential in a ring trap. By taking the Bethe-ansatz-type wavefunction and considering the periodic boundary condition properly, we derive analytical solutions for the heteronuclear system. The eigen-energies represented in terms of quasi-momentums can then be determined by solving a set of coupled equations. We present a number of results, which display different features from the case of identical atoms. Our result can be reduced to the well-known Lieb-Liniger solution when two interacting atoms have the same masses.     

Large tunable Rashba spin splitting of a two-dimensional electron gas in Bi2Se3

We report a Rashba spin splitting of a two-dimensional electron gas in the topological insulator Bi(2)Se(3) from angle-resolved photoemission spectroscopy. We further demonstrate its electrostatic control, and show that spin splittings can be achieved which are at least an order-of-magnitude larger than in other semiconductors. Together these results show promise for the miniaturization of spintronic devices to the nanoscale and their operation at room temperature.     

Polymer-precursor-derived (am-) SiC/TiC composites for resistive heaters in large volume multi-anvil high pressure/high-temperature apparatus

(Amorphous-)SiC/TiC composites for resistive tubular heaters in HP/HT experiments were obtained via a polymer-precursor process. A slurry consisting of a commercial SiC-precursor polymer (allylhydridopolycarbosilane, AHPCS) and TiC powder as conductive filler was applied to the inner walls of zirconia insulation tubes, using a centrifugation-casting method. Resistive coatings with homogeneous thickness of ～200 μm were obtained. The heaters were tested in octahedral multi-anvil assemblies at ～10 GPa with simultaneous recording of heating voltage and current. Up to a maximum temperature of ～1800°C they showed temperature vs. power characteristics reproducible from batch to batch, with resistance decreasing from 0.08 to 0.02 Ω during heating. Microstructural characterization using SEM/EDX was carried out on the recovered SiC/TiC composite material, as well as on pristine resistive heaters directly after coating and curing to 230°C, and after additional pyrolysis at 900°C in argon. In all cases, a stable composite microstructure of an interpenetrating network of TiC particles with either silicon carbide polymer precursor or an amorphous SiC phase were found. The composites were characterized by XRD and thermogravimetry. Further improvement of coating procedure and materials combination (precursor/filler/insulator substrate) may result in advanced coatings, operational well beyond 2000°C.     

37-element solar adaptive optics for 26-cm solar fine structure telescope at Yunnan Astronomical Observatory

A 37-element solar adaptive optics （AO） system was built and installed at the 26-cm solar fine structure telescope of Yunnan Astronomical Observatory. The AO system is composed of a fine tracking loop with a tip/tilt mirror and a correlation tracker, a high-order correction loop with a 37-element deformable mirror, a correlating Shack-Hartmann wavefront sensor based on the absolute difference algorithm, and a real time controller. The system was completed on Sep. 28, 2009 and was used to obtain AO-corrected high-resolution solar images. The contrast and resolution of the images are clearly improved after wavefront correction by AO. To the best of out knowledge, this system is the first solar AO system in China.     

小型化电谐振人工特异材料研究

详细分析了电谐振人工特异材料设计原理,并结合等效电路模型通过加载等效电感、等效电容和接地等方法,将相同尺寸的工字形结构工作频率从12.21 GHz降到了5.46 GHz,小型化效果明显.该成果不仅对于不同结构人工特异材料小型化设计提供了重要的参考,同时也为设计不同性能、不同工作频率的人工特异材料提供了明确的研究方向和有效的途径.     

不良导体导热系数测量实验中两种冷却方式的对比研究

对稳态法测量不良导体导热系数实验中两种冷却方式进行了对比研究,实验结果表明：自然对流冷却方式测量结果很接近理论值,强迫对流冷却方式测量结果偏差较大,分析了偏差产生的原因．     

双波长薄层扫描色谱法测定胡麻卵磷脂中磷脂酰胆碱的含量

以氯仿-甲醇-水(65∶25∶4,V∶V∶V)为展开系统,测定波长λS=235nm,参比波长λR=260nm,反射法双波长锯齿形扫描磷脂酰胆碱峰面积,外标两点法计算含量,建立了双波长薄层扫描色谱法测定胡麻卵磷脂中磷脂酰胆碱含量的分析方法。胡麻卵磷脂中磷脂酰胆碱的含量为62.4%,平均回收率为99.6%,RSD=3.42%。方法经济实用、结果可靠。     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

偏心激励聚合物光纤横截面的光功率分布

研究了偏心激励多模聚合物光纤横截面的光功率分布。用光线追迹法计算了不同的激励源偏心距离和光纤长度时,光纤出射端横截面的光功率分布,并用二维CMOS图像探测器阵列进行了测量。数值计算和实验测量的结果均表明随着激励源偏心距的增加,光功率分布由光纤轴心向外偏移并形成环状;光功率分布在圆周方向的均匀性随着光纤长度的增加而趋于均匀。对中心激励的弯曲光纤光功率分布的测量结果表明,当弯曲曲率半径远大于临界曲率半径时,光功率分布无显著展宽,光功率分布随曲率半径的减小而向曲率外侧偏移;当光纤弯曲半径接近于临界曲率半径时,光功率分布显著展宽。     

利用傅里叶变换红外光谱法鉴定小麦品种

利用傅里叶变换红外(FTIR)光谱法分析了8个不同小麦品种根部的红外光谱图,对红外光谱图的吸收峰进行了归属分析,通过对各谱图的比对发现,在相同波数范围内,不同的小麦品种其红外谱图的形状、波数及吸收峰的多少有所不同。结果表明不同小麦品种的红外光谱图有明显的差异,其一在2800～2980cm-1波数范围内,此区反映的主要是甲基、亚甲基的伸缩振动,化合物分子链的长短、分子量的大小在此区有显现;其二差别较大的区域在1510～1730cm-1范围内,它反映的主要是酰胺的氮原子及α碳原子取代基的性质,可能是源于基因的差异,此区域内谱图差异较大。因此FTIR光谱法可用于不同小麦品种的鉴别。