磁镜装置中ECR等离子体硬X射线强度观测

本文描述用硬X射线针孔成象法测量简单磁镜装置中ECR等离子体辐射特性的方法及其结果。这种非破坏性的成象法,直接显示了热电子等离子体的空间分布,一次放电可成一帧清晰的象,且由此可得出二维的等发射强度线。大量结果表明电子环是非轴对称的,并非为一个整环,而是在微波注入口的对面有一个缺口。当微波功率改变时,环也在改变。     

The twoscale asymptotic error analysis for piezoelectric problems in the quasi-periodic structure

Applications for piezoelectric efect have grown rapidly,and piezoelectric materials play important roles in countless areas of modern life.By means of twoscale method and coupled boundary layer,some new kinds of twoscale asymptotic expansions for solutions to the electrical potential and the displacement in quasi-periodic structure under coupled piezoelectric efect are derived,and the homogenization constants of piezoelectric materials are presented.The coupled twoscale relation between the electrical potential and the displacement is set up,and some improved asymptotic error estimates are analyzed.     

催化动力学荧光法测定中草药对羟基自由基的清除率

苯甲酸具有很弱的荧光,在Co2+的催化下,过氧化氢能氧化苯甲酸发出强的荧光。中草药提取物可以清除溶液中的·OH, 使产物的生成量减少, 从而使溶液的荧光增加程度降低。据此原理建立了一种测定中草药对羟基自由基清除率的催化动力学荧光新体系。当中草药的浓度为4.0 mg(干重)·mL-1时,测得紫花地丁、苍术和赤芍对羟基自由基的清除率分别为60.8%,40.1%和94.3%。该方法与分光光度法测定结果相比无显著性差异。     

Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.     

基于遗传算法的混沌系统二自由度比例-积分-微分控制研究

二自由度比例-积分-微分(PID)控制算法简单、实用，但将其应用于复杂非线性系统控制时参数整定困难.运用改进的遗传算法进行二自由度PID控制器参数优化，参数优化的收敛速度快、准确，将其应用于Chen氏混沌系统和同步电动机混沌系统的控制中，仿真研究收到良好的控制效果. 关键词： 混沌系统 遗传算法 比例-积分-微分控制     

5种丹参主要成分及微结构的检测及综合表征

利用X射线荧光(XRF)、粉末X射线衍射(PXRD)和傅里叶变换红外光谱(FTIR)分析技术,对安国栽培的5个不同种质丹参主要成分及微结构检测,对各样品中多种元素种类及含量、晶体及非晶体成分以一套综合特征图的方式对其表征;该谱将同种属不同种质丹参中的共有成分和细微差异之处给与直观地描述。3种技术共有制样简单,测定速度快,再现性和客观性好的特点;可用于药材优良品种的选育、中药材GAP种植条件的指导、药材产地特征、主要成分及微结构的检测及表征、质量稳定性的控制及真伪鉴别。     

Ab initio investigation into the structural, electronic and elastic properties of AlCu2TM (TM = Ti, Zr and Hf) ternary compounds

The Al-Cu-TM (TM = transition metal) alloy system has attracted great attention for both excellent glass-forming ability and its interesting physical properties. In this work, an investigation into the crystal, electrical and elastic properties of the AlCu₂TM (TM = Ti, Zr, and Hf) compounds has been conducted by first-principles calculations based on density-functional theory. The fully relaxed structure parameters of the AlCu₂TM compounds are in good agreement with previous experimental and other theoretical results. Besides, the cohesive energies of all the AlCu₂TM compounds have been evaluated. The energy band and densities of state of these compounds are also obtained. According to the calculated single crystal elastic constants, all the compounds are mechanically stable. The polycrystalline bulk moduli, shear moduli, Young’s moduli and Poisson’s ratio have been deduced by using Voigt-Reuss-Hill (VRH) approximations. The calculated negative Cauchy pressure and ratio of bulk modulus to shear modulus indicated that the AlCu₂TM compounds are ductile materials. The Debye temperatures of the AlCu₂TM compounds decrease with increasing the TM (Ti, Zr, and Hf) atomic number.     

Geometric phases in qubit-oscillator system beyond conventional rotating-wave approximation

In this work we investigated the geometric phases of a qubit-oscillator system beyond the conventional rotating- wave approximation. We find that in the limiting of weak coupling the results coincide with that obtained under rotating-wave approximation while there exists an increasing difference with the increase of coupling constant. It was shown that the geometric phase is symmetric with respect to the sign of the detuning of the quantized field from the one-photon resonance under the conventional rotating-wave approximation while a red-blue detuning asymmetry occurs beyond the conventional rotating-wave approximation.     

Generation of minimally persistent circle formation for a multi-agent system

In this paper, two methods of generating minimally persistent circle formation are presented. The proposed methods adopt a leader-follower strategy and all followers are firstly motivated to move into the leader＇s interaction range. Based on the information about relative angle and relative distance, two numbering schemes are proposed to generate minimally persistent circle formation. Distributed control laws are also designed to maintain the desired relative distance between agents. The distinctive features of the proposed methods are as follows. First, only 2n - 3 unilateral communication links for n agents are needed during the circle formation process and thus the communication complexity can be reduced. In addition, the formation topology is kept fixed for the whole motion and achieves a self-stability property. Finally, each follower keeps a regualr interval with its neighbors and the formation converges to a uniform circle formation. Simulation results are also provided to demonstrate the effectiveness of the proposed methods.     

Optimization of transport protocols in complex networks

In this paper, an optimal routing strategy is proposed to enhance the traffic capacity of complex networks. In order to avoid nodes overloading, the new algorithm is derived on the basis of generalized betweenness centrality which gives an estimate of traffic handled by the node for a route set. Since the nodes with large betweenness centrality are more susceptible to traffic congestion, the traffic can be improved, as our strategy, by redistributing traffic load from nodes with large betweenness centrality to nodes with small betweenness centrality in the proceeding of computing collective routing table. Particularly, depending on a parameter that controls the optimization scale, the new routing can not only enlarge traffic capacity of networks more, but also enhance traffic efficiency with smaller average path length. Comparing results of previous routing strategies, it is shown that the present improved routing performs more effectively.