Ammonia-treated activated carbon as support of Ru-Ba catalyst for ammonia synthesis

Ammonia-treated activated carbon has been studied as a support of Ru-Ba catalyst for ammonia synthesis. It is shown that the introduction of nitrogen leads to a decrease of ammonia synthesis activity for the catalysts with a low Ba/Ru molar ratio, while no significant changes are obtained for the catalysts with a high Ba/Ru molar ratio, confirming that electronegative impurities suppress the activity in ammonia synthesis and consume part of the promoters. This revised version was published online in June 2006 with corrections to the Cover Date.     

Decontamination of radioactive cesium from natural NaCl by amide-type open-chain crown ethers

An attempt has been made to develop a radiochemical methodology for the decontamination of a trace amount of radioactive cesium from a bulk amount of natural NaCl by liquid-liquid extraction (LLX). Open chain crown ethers, of amide type, namely, N,N,N",N"-tetraphenyl-3,6-dioxaoctanediamide (TDD), N,N,N",N"-tetraphenyl-3,6,9-trioxaundecanediamide and N,N"-dinaphthyl-N,N"-diphenyl-3,6-dioxaoctanediamide (DDD) have been chosen for this purpose. The separation factor between Cs and Na is the highest when 10^-4M TDD dissolved in nitrobenzene is used as extractant and 0.4M picric acid at pH 5.0 is used as aqueous phase. About 60% Cs is extracted in this condition in a single run.     

Recent progress in two-photon small molecule fluorescent probes for enzymes

This review aims to provide a summary of the progress in TP small molecule fluorescent probes for enzymes in recent years and displays the main fluorescent mechanisms that have been applied to design probes.     

基于壳聚糖膜固定双酶的胆碱传感器的研究

提出了一种基于壳聚糖膜固定辣根过氧化物酶 胆碱氧化酶的胆碱传感器的制备方法。该传感器以电聚合于玻碳电极的硫堇作为电子传递介体,在pH6. 8,外加电压-0. 2V(vs.SCE)条件下,其峰电流与浓度范围 5. 0×10-5 ~3. 0×10-3 mol/L的胆碱呈良好的线性响应;检出限为 1. 0×10-5 mol/L。传感器有良好的选择性和稳定性,使用一月后,仍能保持其初始活性的 80%。     

甲亢病人血清镁含量及其临床意义

用火焰原子吸收法测定了２０００例甲亢病人的血清镁含量及１２００例天津市正常人群血清镁含量，结果显示，甲亢病人血清镁含量显著低于正常人群，有显著统计意义（Ｐ〈０．０１）。提示：甲亢病人血清镁含量对甲亢病诊断及治疗过程的镁的摄入补充有重要的意义。     

Synthesis and photoluminescence of single crystals europium ion-doped BaF2 cubic nanorods

In this work, we used the hydrothermal method to synthesize Eu³⁺ ion-doped cubic BaF₂ nanorods, which is a luminescent material. The clubbed structures were well crystallized and exhibited face-centred cubic structures, as indicated by powder X-ray diffraction, scanning electron microscopy, electron diffraction, and transmission electron microscopy. The luminescent properties were studied, and local symmetry surrounding Eu³⁺ ions and electronic transition processes included. The results indicated that Eu³⁺ occupied only one C_4ν site in nanorods.     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

模式识别—人工神经网络在化学中的若干新应用

本文通过我们应用模式识别－人工神经网络方法预报新化合物、熔盐相图以及复杂化学反应体系的研究，展示应用模式识别－人工神经网络方法与物理化学理论相结合，研究化学现象的可能性和应用价值。     

生物质裂解产物的制备及HPLC检测其成分的虚拟仿真实验开发

In order to improve university laboratory teaching and practical education under the background of information technology, as well as overcome the difficulty for practical training, develop a virtual simulation experiment platform for rapid pyrolysis of natal materials and high-performance liquid chromatographic (HPLC) detection of its components. The experiment integrates the actual operation process of the plant to produce cleaved products by rapid pyrolysis of biomass with HPLC detection. The virtual experiment is divided into biomass sample pretreatment, rapid biomass pyrolysis, bio-oil extraction, and HPLC determination of complex components, making the biomass cleavage workshop "real" through simulation. This virtual simulation experiment fully integrates the utilization of biomass resources and basic chemistry courses (such as organic chemistry, instrumental analysis, chemical engineering principles, etc.), which are widely involved in agricultural and forestry majors with advantageous characteristics value.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.