碳酸盐岩储层流体包裹体差分拉曼光谱的研究

拉曼微探针分析法对单个气液包裹体的化学成分和相态的无破坏性测量来说,目前几乎是唯一最好的方法.但是由于众多因素的影响,特别是主矿物具有较强荧光时,提高信噪比的问题急待解决.本工作对碳酸盐岩储层包裹体样品制成的薄片进行了显微观察、荧光测试及拉曼分析,并进行了空间上横向XY扫描、纵向上深度剖析(Z扫描)和冷热台上变温的流体包裹体筹分拉曼光谱测量方法的研究.结果表明,所得到的差谱揭示了包裹体更真实的光谱曲线,消除了主矿物对包裹体的干扰,以较高的信噪比显现出包裹体中流体(-170℃温度下的冰)位于位移波数3 098 cm-1附近的宽拉曼散射峰,明显的改善了信噪比.     

Sparsity-constrained SENSE reconstruction: An efficient implementation using a fast composite splitting algorithm

Parallel imaging and compressed sensing have been arguably the most successful and widely used techniques for fast magnetic resonance imaging (MRI). Recent studies have shown that the combination of these two techniques is useful for solving the inverse problem of recovering the image from highly under-sampled k-space data. In sparsity-enforced sensitivity encoding (SENSE) reconstruction, the optimization problem involves data fidelity (L2-norm) constraint and a number of L1-norm regularization terms (i.e. total variation or TV, and L1 norm). This makes the optimization problem difficult to solve due to the non-smooth nature of the regularization terms. In this paper, to effectively solve the sparsity-regularized SENSE reconstruction, we utilize a new optimization method, called fast composite splitting algorithm (FCSA), which was developed for compressed sensing MRI. By using a combination of variable splitting and operator splitting techniques, the FCSA algorithm decouples the large optimization problem into TV and L1 sub-problems, which are then, solved efficiently using existing fast methods. The operator splitting separates the smooth terms from the non-smooth terms, so that both terms are treated in an efficient manner. The final solution to the SENSE reconstruction is obtained by weighted solutions to the sub-problems through an iterative optimization procedure. The FCSA-based parallel MRI technique is tested on MR brain image reconstructions at various acceleration rates and with different sampling trajectories. The results indicate that, for sparsity-regularized SENSE reconstruction, the FCSA-based method is capable of achieving significant improvements in reconstruction accuracy when compared with the state-of-the-art reconstruction method.     

Efficient activation of peroxymonosulfate by hollow cobalt hydroxide for degradation of ibuprofen and theoretical study

Hollow microsphere structure cobalt hydroxide (h-Co(OH)₂) was synthesized via an optimized solvothermal-hydrothermal process and applied to activate peroxymonosulfate (PMS) for degradation of a typical pharmaceutically active compound, ibuprofen (IBP). The material characterizations confirmed the presence of the microscale hollow spheres with thin nanosheets shell in h-Co(OH)₂, and the crystalline phase was assigned to α-Co(OH)₂. h-Co(OH)₂ could efficiently activate PMS for radicals production, and 98.6% of IBP was degraded at 10 min. The activation of PMS by h-Co(OH)₂ was a pH-independent process, and pH 7 was the optimum condition for the activation-degradation system. Scavenger quenching test indicated that the sulfate radical (SO₄^{? ?}) was the primary reactive oxygen species for IBP degradation, which contributed to 75.7%. Fukui index (f ^?) based on density functional theory (DFT) calculation predicted the active sites of IBP molecule for SO₄^{? ?} attack, and then IBP degradation pathway was proposed by means of intermediates identification and theoretical calculation. The developed hollow Co(OH)₂ used to efficiently activate PMS is promising and innovative alternative for organic contaminants removal from water and wastewater.     

Molecular dynamics study of mechanical properties of carbon nanotube-embedded gold composites

The mechanical properties of nano-single crystal gold and carbon nanotube-embedded gold (CNT/Au) composites under axial tension were investigated using molecular dynamics (MD) simulation method. The interactions between atoms were modeled using the many-body tight-binding (TB) potential and the empirical Tersoff potential coupled with the Lennard-Jones (L-J) potential. We get the yield strain and the yield stress of nano-single crystal gold 0.092, 5.74 GPa, respectively. The computational results show that the increase in Young's modulus of the long CNT-embedded gold composite over pure gold is much large. From the simulation, we also find that the yield stress and the yield strain of short CNT-embedded gold composite are evidently less than that of the nano-single crystal gold.     

利用一个三粒子W态隐形传送N粒子GHZ态

杨洪钦等提出一个用两个三粒子W态作为量子信道将N粒子GHZ态从发送者传送给两个接收者中任意一个的量子隐形传送方案. 给出其理论分析,并提出了一个仅用一个三粒子W态作为量子信道将N粒子GHZ态传送给两个接收者之一的量子隐形传送的方案. 关键词： 隐形传态 GHZ态 W态量子信道     

Highly fluorescent polycaprolactones decorated with di(thiophene‐2‐yl)‐diketopyrrolopyrrole: A covalent strategy of tuning fluorescence properties in solid states

Well‐defined 1,4‐diketo‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole (DTDPP) labeled polycaprolactones (PCL) with different chain lengths were synthesized and characterized. The effect of polymer chain lengths on the optical properties of DTDPP in solid states was studied by UV‐Vis absorption spectroscopy as well as steady‐state and dynamic fluorescence spectroscopies. Our results indicate that when the PCL side chain is extended to a certain length, the intermolecular aggregation of DTDPP units can be reduced significantly due to segregation effect of PCL. This approach offers a new facile strategy to address the common problem of aggregation‐caused quenching existing in organic fluorophores. These highly fluorescent biodegradable PCL polymers may find broad biomedical applications such as fluorescence‐based bioimaging and tissue engineering. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1032–1042     

Effect of polyethylene glycol on corrosion of fresh macroporous silicon in 1.0 M NaOH and application in determination of porosity and thickness by gravimetric measurement

Abstract

This work presents on improvement in gravimetric measurement for determining the porosity and thickness of microporous silicon. Herein, the corrosion of fresh macroporous silicon (f-MPSi) in 1.0?M NaOH with different concentrations of polyethylene glycol (PEG 200/400/600) was studied by weight loss measurement and scanning electron microscopy (SEM). The results showed that the corrosion rate decreased with increasing polyethylene glycol concentration, and increased with an increase in temperature. Polyethylene glycol can inhibit the corrosion of f-MPSi in NaOH solution. Moreover, 1.0?M NaOH/PEG 600 (10%) can be used as the optimized solution to remove f-MPSi for measuring its porosity and thickness by gravimetric measurement.     

有机化学实验线上课程之扬长避短教学设计与实践篇

It has been two months since a boom of online education triggered by the epidemic in China. At present, we are keeping focus on how to optimize our online class. In the case of chemistry laboratory courses, there's not much that can be done to experimental operations through online teaching. While for the traditional teaching procedure, there is still room for improvement in terms of integrating research to teaching, interactivity, etc. This paper will present some design strategies for improving teaching the organic chemistry laboratory online. To be specific, it describes how teaching materials like the lesson plan and virtual lab were coordinated into the online teaching. And we will also discuss the holistic approach to a better outcome for students' active learning and integration research into teaching by redesigning multiple phases, such as the pre-laboratory preparation, live online class, experimental operations.     

Ultra-performance LC/TOF MS analysis of medicinal Panax herbs for metabolomic research

In this study, metabolite profiling of five medicinal Panax herbs including Panax ginseng (Chinese ginseng), Panax notoginseng (Sanchi), Panax japonicus (Rhizoma Panacis Majoris), Panax quinquefolium L. (American ginseng), and P. ginseng (Korean ginseng) were performed using ultra-performance LC-quadrupole TOF MS (UPLC-QTOFMS) and multivariate statistical analysis technique. Principal component analysis (PCA) of the analytical data showed that the five Panax herbs could be separated into five different groups of phytochemicals. The chemical markers such as ginsenoside Rf, 20(S)-pseudoginsenoside F11, malonyl gisenoside Rb1, and gisenoside Rb2 accountable for such variations were identified through the loadings plot of PCA, and were identified tentatively by the accurate mass of TOFMS and partially verified by the available reference standards. Results from this study indicate that the proposed method is reliable for the rapid analysis of a group of metabolites present in herbal medicines and other natural products and applicable in the differentiation of complex samples that share similar chemical ingredients.