Regenerable Leptin Immunosensor Based on Protein G Immobilized Au‐Pyrrole Propylic Acid‐Polypyrrole Nanocomposite

A regenerable, labelless electrochemical immunosensor is investigated. In this work, pyrrole (Py) and pyrrole propylic acid (Pa) were co‐electropolymerized in the presence of gold nanoparticles to form a porous, conductive, stable and hydrophilic nanocomposite, followed by the covalent attachment of protein G to capture an antibody as the probe for the immunoassay. The regeneration of the sensor was achieved by rinsing the electrodes with 0.1 M glycine buffer (pH 2.7). The binding and dissociation of the antibody with protein G and optimization of the efficient immobilization were studied by impedance and optical measurements, respectively. The charge transfer resistance obtained from the impedance measurements is used to study the interaction between antibody‐protein G and antibody‐antigen. The immunosensor performance and its regenerability were evaluated by using anti‐leptin IgG as the probe protein to detect leptin in 0.01 M PBS, and its specificity was tested in 1% human serum. The leptin impedimetric immunosensor exhibits a detection dynamic range of 10–100 000 ng/mL with 10 ng/mL detection limit in 0.01 M PBS+1% serum solutions. This work proves the feasibility to make a sensitive, regenerative electrochemical immunosensor, which could be very useful for environmental control and food analysis.     

Analytical Biosensing of Hydrogen Peroxide on Brilliant Cresyl Blue/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrode

A cationic quinine‐imide dye brilliant cresyl blue (BCB) and horseradish peroxidase (HRP) were co‐immobilized within ormosil on multiwalled carbon nanotubes modified glassy carbon electrode for the fabrication of highly sensitive and selective hydrogen peroxide biosensor. The presence of epoxy group in ormosil as organic moiety improves the mechanical strength and transparency of the film and amino group provides biocompatible microenvironment for the immobilization of enzyme. The presence of MWCNTs improved the conductivity of the nanocomposite film. The surface characterization of MWCNT modified ormosil nanocomposite film was performed with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Cyclic voltammetry and amperometry measurements were used to study and optimize the performance of the resulting peroxide biosensor. The apparent Michaelis–Menten constant was determined to be 1.5 mM. The proposed H₂O₂ biosensor exhibited wide linear range from 3×10^?7 to 1×10^?4 M, and low detection limit 1×10^?7 M (S/N=3) with fast response time <5 s. The probable interferences in bio‐matrix were selected to test the selectivity and no significant response was observed in the biosensor. This biosensor possessed good analytical performance and long term storage stability.     

Iodate Sensing Electrodes Based on Phosphotungstate‐ Doped‐Glutaraldehyde‐Cross‐Linked Poly‐L‐lysine Coatings

Glassy carbon electrode modified with phosphotungstate‐doped‐glutaraldehyde‐cross‐linked poly‐L ‐lysine (PLL‐GA‐PW) film was employed for iodate determination. The PLL‐GA‐PW film electrode shows excellent electrocatalytic activity towards iodate reduction with significant reduction of overpotential. Under optimized experimental conditions, a linear range from 5×10^?8 to 2.27×10^?2 M with a sensitivity of 61.75 μA mM^?1 was obtained. Possible interfering species, in iodate determination, were evaluated and the applicability of proposed sensor for iodate estimation in table salt was also demonstrated. The PLL‐GA‐PW film electrode shows fast response, wider linear range, and good selectivity and stability.     

Permanent antistatic phthalocyanine/epoxy nanocomposites - Influence of crosslinking agent, solvent and processing temperature

Cross-linked epoxy matrices containing small amounts of semi-conductive phthalocyanine (Phthalcon) nanoparticles were prepared using different crosslinking agents and processing temperatures. A starting mixture containing an optimum dispersion of these nanoparticles and with an almost equal and large Hamaker constant was always used. Nevertheless large differences in the relation between the volume conductivity σ_v and the particle concentration φ were found and this relation appeared to be sensitive to small changes in processing temperature and the application of a post-cure. Also the amine crosslinker chosen and the initial amount of solvent (catalyst) in the starting dispersion had a major effect. It was shown that these changes influence strongly the formation of and the final conductive fractal particle network morphology through the polymer matrix. During processing a local relaxation of the initially formed fractal particle network into another fractal particle network was often observed, which introduced or enlarged the amount of isolating material between the particles of the conductive network and changed the fractality and structure of the conductive backbone of the particle network. This local relaxation lowered the σ_v at each phthalcon concentration and enlarged φ_c by several orders of magnitude. The occurrence of local relaxation is dependent on the rate of viscosity change during the crosslinking of the polymer matrix components, the way the fractal conductive particle network is formed during processing (universal or non-universal) and the amount of solvent present. Local relaxation may even occur after the gel point of the polymer matrix. A severe post-cure may be needed to stop this local relaxation. To our knowledge local relaxation of a (fractal) nanoparticle network in a polymer matrix during processing is a new phenomenon, not reported before for polymer composites containing (conductive) nanoparticles.     

A facile approach toward multicomponent supramolecular structures: selective self-assembly via charge separation

A novel approach toward the construction of multicomponent two-dimensional (2-D) and three-dimensional (3-D) metallosupramolecules is reported. Simply by mixing carboxylate and pyridyl ligands with cis-Pt(PEt(3))(2)(OTf)(2) in a proper ratio, coordination-driven self-assembly occurs, allowing for the selective generation of discrete multicomponent structures via charge separation on the metal centers. Using this method, a variety of 2-D rectangles and 3-D prisms were prepared under mild conditions. Moreover, multicomponent self-assembly can also be achieved by supramolecule-to-supramolecule transformations. The products were characterized by (31)P and (1)H multinuclear NMR spectroscopy, electrospray ionization mass spectrometry, and pulsed-field-gradient spin echo NMR techniques together with computational simulations.     

Sesquiterpenes and Other Metabolites from the Marine Red Alga Laurencia composita (Rhodomelaceae)

Two new halogenated sesquiterpenes, (8β)‐10‐bromo‐3‐chloro‐2,7‐epoxychamigr‐9‐en‐8‐ol ( 1 ) and 2‐bromo‐3‐chlorobisabola‐7(14),11‐diene‐6,10‐diol ( 3 ), and one new phytol‐derived diterpene, 2,3‐epoxyphytyl acetate ( 4 ), along with cis‐ and trans‐1‐methylcyclohexane‐1,4‐diol ( 5 and 6 ) which were isolated from a natural source for the first time but have been previously synthesized, were isolated from the marine red alga Laurencia composita and characterized. In addition, a known sesquiterpene, pacifenediol ( 2 ), and the known furanone derivative 7 were also identified. Their structures were established by NMR and mass spectroscopic methods.     

Drug–Membrane Interaction on Immobilized Liposome Chromatography Compared to Immobilized Artificial Membrane (IAM), Liposome/Water,and Octan‐1‐ol/Water Systems

The objective of this study was to investigate drug–membrane interaction by immobilized liposome chromatography (ILC; expressed as lipophilicity index log K_s) and the comparison with lipophilicity indices obtained by liposome/H₂O, octan‐1‐ol/H₂O, and immobilized artificial membrane (IAM) systems. A set of structurally diverse monofunctional compounds and drugs (nonsteroidal anti‐inflammatory drugs and β‐blockers) were selected in this study. This set of solutes consists of basic or acidic functionalities which are positively or negatively charged at physiological pH 7.4. No correlation was found between log K_s from ILC and lipophilicity indices from any of the other membrane model systems for the whole set of compounds. For structurally related compounds, significant correlations could be established between log K_s from ILC and lipophilicity indices from IAM chromatography and octan‐1‐ol/H₂O. However, ILC and liposome/H₂O systems only yield parallel partitioning information for structurally related large molecules. For hydrophilic compounds, the balance between electrostatic and hydrophobic interactions dominating drug partitioning is different in these two systems.     

Synthesis of farinomalein

Farinomalein, a recently isolated maleimide from Paecilomycesfarinosus, was synthesized in two steps from a readily available γ-hydroxybutenolide.     

An immediate luminescence enhancement method for determination of vitamin B1 using long-wavelength emitting water-soluble CdTe nanorods

A method for determination of vitamin B₁ has been developed that is based on the enhancement effect of vitamin B₁ on the luminescence of water-soluble CdTe nanorods modified with thioglycolic acid and cysteine. The effect of variables including the size of the nanorods on the enhancement of luminescence have been investigated. A preliminary mechanistic study showed that the passivating action of vitamin B₁ on the surface of the CdTe nanorods is likely to be responsible for the enhancement. Interferences by shortwave fluorescence are effectively eliminated because measurements are performed in the near-infrared. Due to the near-infrared measurement character, the fluorescence interference of vitamin B₂ can be effectively eliminated. Under the optimum conditions, the extent of luminescence enhancement is proportional to the concentration of vitamin B₁ in the range from 0.1 to 3.0 μmol L^?1 and the detection limit is 0.03 μmol L^?1. The relative standard deviation for 2.0 μmol L^?1 vitamin B₁ is 1.3% (n?=?6). The method is highly sensitive and selective, avoids the sample treatment needed in other procedures, and can be applied to the determination of vitamin B₁ in real samples with satisfactory results.     

Ammonia Fiber Expansion (AFEX) Pretreatment,Enzymatic Hydrolysis,and Fermentation on Empty Palm Fruit Bunch Fiber (EPFBF) for Cellulosic Ethanol Production

Empty palm fruit bunch fiber (EPFBF), a readily available cellulosic biomass from palm processing facilities, is investigated as a potential carbohydrate source for cellulosic ethanol production. This feedstock was pretreated using ammonia fiber expansion (AFEX) and enzymatically hydrolyzed. The best tested AFEX conditions were at 135 °C, 45 min retention time, water to dry biomass loading of 1:1 (weight ratio), and ammonia to dry biomass loading of 1:1 (weight ratio). The particle size of the pretreated biomass was reduced post-AFEX. The optimized enzyme formulation consists of Accellerase (84 μL/g biomass), Multifect Xylanase (31 μL/g biomass), and Multifect Pectinase (24 μL/g biomass). This mixture achieved close to 90% of the total maximum yield within 72 h of enzymatic hydrolysis. Fermentation on the water extract of this biomass affirms that nutrients solely from the pretreated EPFBF can support yeast growth for complete glucose fermentation. These results suggest that AFEX-treated EPFBF can be used for cellulosic biofuels production because biomass recalcitrance has been overcome without reducing the fermentability of the pretreated materials.