STUDY ON THE SYNTHESIS AND PROPERTIES OF MACRORETICULAR IPN POLYACRYLAMIDE—POLY(VINYL—ETHYLENEDIAMINE)CHELATE SORBENTS

A new series of MR-IPN polyacrylamide—poly(vinyl-ethylenediamine)chelatesorbents were prepared by the reaction of ethylenediamine with MR-IPN matrixes.The newchelate sorbent showed good sorption properties for auric and platinic ions.     

Adsorption of NH3 onto activated carbon prepared from palm shells impregnated with H2SO4

Adsorption of ammonia (NH3) onto activated carbons prepared from palm shells impregnated with sulfuric acid (H2SO4) was investigated. The effects of activation temperature and acid concentration on pore surface area development were studied. The relatively large micropore surface areas of the palm-shell activated carbons prepared by H2SO4 activation suggest their potential applications in gas adsorption. Adsorption experiments at a fixed temperature showed that the amounts of NH3 adsorbed onto the chemically activated carbons, unlike those prepared by CO2 thermal activation, were not solely dependent on the specific pore surface areas of the adsorbents. Further adsorption tests for a wide range of temperatures suggested combined physisorption and chemisorption of NH3. Desorption tests at the same temperature as adsorption and at an elevated temperature were carried out to confirm the occurrence of chemisorption due to the interaction between NH3 and some oxygen functional groups via hydrogen bonding. The surface functional groups on the adsorbent surface were detected by Fourier transform infrared spectroscopy. The amounts of NH3 adsorbed by chemisorption were correlated with the contents of elemental oxygen present in the adsorbents. Mechanisms for chemical activation and adsorption processes are proposed based on the observed phenomena.     

Synthesis of nonracemic allylic hydroxy phosphonates via alkene cross metathesis

Allylic hydroxy phosphonates and their derivatives can be interconverted by using cross metathesis with second generation Grubbs catalyst. The absolute stereochemistry of the starting phosphonate is conserved in the product. Cross metathesis reaction of the acrolein-derived phosphonate 2a yields a series of functionalized allylic hydroxy phosphonates. However, the cross metathesis reaction is often accompanied by competing dimerization and alkene migration reactions leading to a reduction in yield. The cinnamaldehyde- and crotonaldehyde-derived phosphonates 2b and 2c were also examined. In general, the metathesis reactions of phosphonates 2b and 2c are considerably slower than those for phosphonate 2a leading to mixtures. Several hydroxyl-protected derivatives of the phosphonate 2a (methyl carbonate 3a, acetate 4a, N-tosyl carbamate 5a, TBDMS 6a, and acetoacetate 7a) undergo metathesis without competing side reactions to give substituted allylic phosphonates in good to excellent yield.     

A zwitterion of 1,5‐bis­(2‐hydroxy­benzamido)‐3‐aza­pentane: a two‐dimensional hydrogen‐bonding network involving dimers

The title compound, 2‐{N‐[2‐(2‐hydroxy­benzamido)ethyl­ammonio­ethyl]amino­carbon­yl}phenolate, C₁₈H₂₁N₃O₄, crystallizes in a zwitterionic form as a result of inter­molecular proton transfer and possesses a negatively charged phenolate group and a protonated amino group. The 2‐hydroxy­benzamide and 2‐(amino­carbonyl)­phenolate moieties attached to the two ends of the C—C—N—C—C backbone adopt a cis conformation in relation to this backbone. All N‐ and O‐bound H atoms are involved in hydrogen‐bond formation; the zwitterions are first linked into head‐to‐tail dimers, which are further organized into a two‐dimensional network parallel to the crystallographic bc plane.     

Separation of metal ions by capillary electrophoresis

A number of experimental parameters have been optimized for the separation of 26 metal ions, including alkali, alkaline earth, transition and lanthanide metal ions. Experimental parameters that were evaluated included nature of indirect-detection reagent, pH of electrolyte, concentration of complexing agent and nature of the surface of the capillary; unbonded and C₁ and C₁₈ bonded phases were studied. In addition the effect of internal diameter on linearity and signal-to-noise ratio was examined, and separation efficiency was determined for a variety of experimental conditions. Detection limits (signal-to-noise RATIO = 3) were ca. 1 μg/ml for the lanthanides, ca. 0.6 μg/ml for transition and alkaline earth ions and ca. 0.1–0.8 μg/ml for alkali metal ions. The average relative standard deviations of were 3.7, 5.1 and 2.5% on unbonded, C₁ and C₁₈ capillaries, respectively. Whereas conventional regression analysis suggested that the calibration curves were linear over the range of 1·10⁻⁵ to 4·10⁻⁴ mol/l, sensitivity plots showed that the results were actually linear to within 6% only over the range of 2.5·10⁻⁵ to 4·10⁻⁴ mol/l.     

Rational design of an “all-in-one” phototheranostic

We report here porphodilactol derivatives and their corresponding metal complexes. These systems show promise as “all-in-one” phototheranostics and are predicated on a design strategy that involves controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation. The requisite balance was achieved by tuning the aromaticity of these porphyrinoid derivatives and forming complexes with one of two lanthanide cations, namely Gd³⁺ and Lu³⁺. The net result led to a metalloporphodilactol system, Gd-trans-2, with seemingly optimal ISC efficiency, photothermal conversion efficiency and fluorescence properties, as well as good chemical stability. Encapsulation of Gd-trans-2 within mesoporous silica nanoparticles (MSN) allowed its evaluation for tumour diagnosis and therapy. It was found to be effective as an “all-in-one” phototheranostic that allowed for NIR fluorescence/photoacoustic dual-modal imaging while providing an excellent combined PTT/PDT therapeutic efficacy in vitro and in vivo in 4T1-tumour-bearing mice.

We report here porphodilactol derivatives and their corresponding metal complexes as “all-in-one” phototheranostics by controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation.     

An in vitro Study on Transition from NO-Hemoglobin to Methemoglobin： Oxygen Effect

The nitrosyl-hemoglobin (HbNO) is the carrier of nitric oxide (NO) which is the important messenger molecule displaying multiple physiologic and pathophysiologic roles. However it is still not clear for the fate of HbNO molecules during the venous-arterial transit. In this letter, the HbNO transition in vitro was studied by using the electron paramagnetic resonance (EPR) spectra. It was found that HbNO molecules were stable when oxygen did not exist in the system but not stable in aerobic conditions. The absorption spectra further revealed that the methemoglobin (metHb) was the product of HbNO in aerobic environment, showing that the HbNO changed to metHb when there were enough oxygen molecules in the system.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.     

Tutorial: Capillary Electrophoresis

In recent years a number of exciting developments have emerged in the area of scientific computational tools for classroom use. Computer Algebra Systems (CASs), for example, Maple, are at the forefront of this arena. Such tools have been long sought by teachers of physical chemistry, inherently a mathematics intensive subject. With a CAS at hand, students can look forward to taking college science courses, like physical chemistry, without the usual mathematics anxiety. These tools can be used to do numerical and symbolic mathematics including calculus and linear algebra. In addition, they have wonderful graphics capabilities that include three-dimensional plots, contour plots, and animations. This paper describes the implementation of Maple in two junior-level physical chemistry courses. The materials used for beginning workshops are presented here and additional examples of Maples graphic and algebraic capabilities are described.