Improved ultrafiltration processes by partial recycle of ultrafiltrate

The economics of ultrafiltration processes may be improved in certain situations by partially recycling the ultrafiltrate. These situations include purification processes involving the use of additives in the makeup stream or processes where a recoverable product is present in the ultrafiltrate. A mathematical solution to this approach has been obtained to calculate the number of stages required as a function of the purification desired, the rejection coefficient of the species being removed, and the number of diavolumes. Some economic comparisons have been performed for multiple-stage ultrafiltration processes and compared with conventional single-stage diafiltration processes.     

Nuclear spin magnetization transfer by doubly selective irradiation

A procedure for doubly selective irradiation of an AX NMR spin system so as to achieve complete magnetization transfer from X to A is described. In combination with suitably gated decoupling this sequence will give substantial savings of time in determinations of T₁ for low-sensitivity spin-½ nuclei, particularly those with negative magnetogyric ratios.     

Coriolis constants of spherical-top molecules from low-temperature infrared studies of vapor band contours: Application to the force field of tungsten hexafluoride

The infrared-active stretching fundamental ν₃ of WF₆ vapor has been studied over the temperature range T = 190–310 K. At lower temperatures the hot-band structure is sufficiently suppressed to allow accurate measurements of the P-R branch spacing, which is a linear function of $\text{T}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$. From the slope of a least-squares line fitting 36 measured spacings, the Coriolis constant is found to be ζ₃ = 0.123. Enough overtone and combination bands have been observed in the infrared and laser Raman spectra of WF₆ for harmonic fundamental frequencies to be estimated. Harmonic force constants are calculated, using ζ₃ as the necessary additional constraint in the F_1u symmetry block. Possible sources of error are discussed and error limits are estimated for all reported frequencies and force constants. The valence stretching force constant is ${}_{\mathrm{r}}\text{= 5.50 ± 0.07}\text{mdyn/}\text{A}\text{?}$.     

Fractional Motion Control: Application to an XY Cutting Table

In path tracking design, the dynamic of actuators must be taken intoaccount in order to reduce overshoots appearing for small displacements.A new approach to path tracking using fractional differentiation isproposed with its application on a XY cutting table. It permits thegeneration of optimal movement reference-input leading to a minimum pathcompletion time, taking into account both maximum velocity, accelerationand torque and the bandwidth of the closed-loop system. Fractionaldifferentiation is used here through a Davidson–Cole filter. Amethodology aiming at improving the accuracy especially on checkpointsis presented. The reference-input obtained is compared with splinefunction. Both are applied to an XY cutting table model and actuatoroutputs compared.     

Enantioselective Nucleophilic β‐Carbon‐Atom Amination of Enals: Carbene‐Catalyzed Formal [3+2] Reactions

An enantioselective β‐carbon amination for enals is disclosed. The nitrogen atom from a protected hydrazine with suitable electronic properties readily behaves as a nucleophile. Addition of the nitrogen nucleophile to a catalytically generated N‐heterocyclic‐carbene‐bound α,β‐unsaturated acyl azolium intermediate constructs a new carbon–nitrogen bond asymmetrically. The pyrazolidinone products from our catalytic reactions are common scaffolds in bioactive molecules, and can be easily transformed into useful compounds such as β³‐amino‐acid derivatives.     

Validation and application of an HPLC-EC method for analysis of coenzyme Q10 in blood platelets

Previous studies have indicated that analysis of coenzyme Q10 (CoQ10) in platelets may be clinically useful. The study objectives are to describe, validate and provide application of an HPLC-EC method for platelet CoQ10 analysis. This method analyzes oxidized (ubiquinone-10) and reduced (ubiquinol-10) forms of CoQ10 using two separate injections with the electrochemical analytical cell set at neutral and oxidizing potentials. Results showed that chromatograms were free of interfering peaks. Calibration curves were constructed over a concentration range 116-2317 nmol/L (r(2) = 0.99). The extraction recovery was >95%. The within-run precision CV% was < or =4.2%, and the day-to-day precision was < or =9.9%. Platelets were isolated by differential centrifugation, and frozen at -70 degrees C until analysis. The application of the method was used to compare accumulation of CoQ10 in platelets vs plasma in eight adult volunteers during a 28 day supplementation period (5 mg/kg/day of ubiquinol-10). Mean platelet total CoQ10 was 164 pmol/10(9) cells, and ubiquinol-10:total CoQ10 ratio was 0.56. During supplementation platelet CoQ10 levels were more consistent and predictable than plasma CoQ10 levels. The results indicate that this validated method for platelet ubiquinol-10 and ubiquinone-10 analysis is acceptable for use in the clinical laboratory, and that platelet CoQ10 may have important advantages over plasma during CoQ10 supplementation.     

Tuning methane content in gas hydrates via thermodynamic modeling and molecular dynamics simulation

Storage and transportation of natural gas as gas hydrate (“gas-to-solids technology”) is a promising alternative to the established liquefied natural gas (LNG) or compressed natural gas (CNG) technologies. Gas hydrates offer a relatively high gas storage capacity and mild temperature and pressure conditions for formation. Simulations based on the van der Waals–Platteeuw model and molecular dynamics (MD) are employed in this study to relate the methane gas content/occupancy in different hydrate systems with the hydrate stability conditions including temperature, pressure, and secondary clathrate stabilizing guests. Methane is chosen as a model system for natural gas. It was found that the addition of about 1% propane suffices to increase the structure II (sII) methane hydrate stability without excessively compromising methane storage capacity in hydrate. When tetrahydrofuran (THF) is used as the stabilizing agent in sII hydrate at concentration between 1% and 3%, a reasonably high methane content in hydrate can be maintained (∼85–100, v/v) without dealing with pressures more than 5 MPa and close to room temperature.     

Pressure and temperature jump relaxation kinetics of the conformational change in Salmonella typhimurium tryptophan synthase L-serine complex: large activation compressibility and heat capacity changes demonstrate the contribution of solvation

Tryptophan synthase is an alpha2beta2 multienzyme complex that exhibits coupling of the alpha- and beta-subunit reactions by tightly controlled allosteric interactions. A wide range of parameters can affect the allosteric interactions, including monovalent cations, pH, alpha-site and beta-site ligands, temperature, and pressure. Rapid changes in hydrostatic pressure (P-jump) and temperature (T-jump) were used to examine the effects of pressure and temperature on the rates of the interconversion of external aldimine and aminoacrylate intermediates in the Tryptophan synthase-L-Ser complex. The intense fluorescence emission of the Tryptophan synthase L-Ser external aldimine complex at 495 nm, with 420 nm excitation, provides a probe of the conformational state of Trp synthase. P-jump measurements allowed the determination of rate constants for the reactions in the presence of Na(+), Na(+) with benzimidazole (BZI), and NH4(+). The data require a compressibility term, beta(o)(double dagger), to obtain good fits, especially for the NH4(+) and BZI/Na(+) data. The compressibility changes are consistent with changes in solvation in the transition state. The transition state for the relaxation is more similar in volume to the closed aminoacrylate complex in the presence of Na(+), while it is more similar to the open external aldimine in the presence of NH4(+). Differences between the relaxations for positive and negative P-jumps may arise from changing relative populations of microstates with pressure. T-jump experiments of the Na(+) form of the tryptophan synthase-L-Ser complex show large changes in rate and amplitude over the temperature range from 7 to 45 degrees C. The Arrhenius plots show strong curvature, and hence require a heat capacity term, DeltaC(p)(double dagger), to obtain good fits. The values of DeltaC(p)(double dagger) are very large and negative (-3.6 to -4.4 kJ mol(-1) K(-1)). These changes are also consistent with large changes in solvation in the transition state for interconversion of external aldimine and aminoacrylate intermediates in the Tryptophan synthase-L-Ser complex.     

Competing C-F activation pathways in the reaction of Pt(0) with fluoropyridines: phosphine-assistance versus oxidative addition

A survey of computed mechanisms for C-F bond activation at the 4-position of pentafluoropyridine by the model zero-valent bis-phosphine complex, [Pt(PH3)(PH2Me)], reveals three quite distinct pathways leading to square-planar Pt(II) products. Direct oxidative addition leads to cis-[Pt(F)(4-C5NF4)(PH3)(PH2Me)] via a conventional 3-center transition state. This process competes with two different phosphine-assisted mechanisms in which C-F activation involves fluorine transfer to a phosphorus center via novel 4-center transition states. The more accessible of the two phosphine-assisted processes involves concerted transfer of an alkyl group from phosphorus to the metal to give a platinum(alkyl)(fluorophosphine), trans-[Pt(Me)(4-C5NF4)(PH3)(PH2F)], analogues of which have been observed experimentally. The second phosphine-assisted pathway sees fluorine transfer to one of the phosphine ligands with formation of a metastable metallophosphorane intermediate from which either alkyl or fluorine transfer to the metal is possible. Both Pt-fluoride and Pt(alkyl)(fluorophosphine) products are therefore accessible via this route. Our calculations highlight the central role of metallophosphorane species, either as intermediates or transition states, in aromatic C-F bond activation. In addition, the similar computed barriers for all three processes suggest that Pt-fluoride species should be accessible. This is confirmed experimentally by the reaction of [Pt(PR3)2] species (R = isopropyl (iPr), cyclohexyl (Cy), and cyclopentyl (Cyp)) with 2,3,5-trifluoro-4-(trifluoromethyl)pyridine to give cis-[Pt(F){2-C5NHF2(CF3)}(PR3)2]. These species subsequently convert to the trans-isomers, either thermally or photochemically. The crystal structure of cis-[Pt(F){2-C5NHF2(CF3)}(P iPr3)2] shows planar coordination at Pt with r(F-Pt) = 2.029(3) A and P(1)-Pt-P(2) = 109.10(3) degrees. The crystal structure of trans-[Pt(F){2-C5NHF2(CF3)}(PCyp3)2] shows standard square-planar coordination at Pt with r(F-Pt) = 2.040(19) A.     

Lipid diffusion from single molecules of a labeled protein undergoing dynamic association with giant unilamellar vesicles and supported bilayers

It is demonstrated that single-molecule tracking of a fluorescently labeled protein undergoing transient binding to model membranes presents a useful method of obtaining fluid properties. The labeled ACBP protein was tracked during its binding to free-standing giant unilamellar vesicles (GUVs) and supported bilayers prepared from the GUVs in the same environment. The analysis of images that are blurred as a result of fast probe diffusion was discussed. An examination of the lateral diffusion trajectories revealed a homogeneous diffusion on the top segments of the GUVs with D = 6.9 +/- 0.3 microm(2)/s. The supported bilayer experiments revealed two diffusion processes, one with Df = 3.1 +/- 0.4 microm(2)/s and the other with Ds = 0.078 +/- 0.001 microm(2)/s. The 2-fold difference in the lipid bilayer mobility for the free-standing and fast components in the supported bilayers is attributed to the known effect of frictional coupling with the solid support. The slow mobile fraction in the bilayer is suggested to be associated with the migration of pore-like structures, originating from the interaction of the membrane with the glass support.