Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

TG-DTA-FTIR analysis and isoconversional reaction profiles for thermal and thermo-oxidative degradation processes in black chokeberry (<Emphasis Type="Italic">Aroniamelanocarpa</Emphasis>)

The thermal and thermo-oxidative processes in Aroniamelanocarpa (black chokeberry) were investigated using combined thermo-analytical (TG-DTA) and spectroscopic (FTIR) experimental techniques. Isoconversional analysis revealed that the process in an inert (argon) atmosphere was probably governed by chlorogenic acid degradation, where autocatalysis (described by the empirical ?esták-Berggren model) might occur due to water already present in the early stages of the process through hydrolysis. Thermal degradation is described by the intrinsic kinetic parameters, where the degradation rate increases proportionally with an increase in the heating rate. Under oxidative conditions, the process was found to be primarily driven by neochlorogenic acid degradation. The thermo-oxidative degradation of Aroniamelanocarpa fresh samples can be described by two competitive reactions, where it was established that a cyanidin-3-glucosylrutinoside degradation made a significant contribution to a comprehensive kinetics. This study showed the targeting of the neochlorogenic acid in Aroniamelanocarpa fresh samples to have a strong hydrogen-donating activity, thereby rendering it capable of very efficiently entrapping the peroxy radicals. Current research has demonstrated that the relative contribution of the two competitive reactions to the overall process is highly dependent on the heating rate of the system under consideration.     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

Charge transport and contact resistance in coplanar devices based on colloidal polyaniline dispersion

The charge transport properties of thin films prepared from colloidal dispersion of polyaniline stabilized by poly(N‐vinylpyrrolidone) (PANI/PVP) have been investigated. The electrical characterization of coplanar device comprising of gold electrodes and PANI/PVP film deposited by spin coating served to gain insights into the contact and bulk resistance. The films prepared from PANI/PVP colloidal dispersion show high stability over a large temperature range. Temperature dependent measurements in the range from 90 to 350 K reveal that the charge transport can be described by a three‐dimensional variable‐range hopping mechanism as the dominant mode in the films. The stability of the films cast from dispersion within a large temperature range opens the possibility of the application as a polymer semiconductor layer in sensors and charge‐transport interlayer in organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1710–1716     

Control of a photoswitching chelator by metal ions: DFT,NBO, and QTAIM analysis

Ability of aroylhydrazones to change conformation upon interaction with light makes them promising candidates for molecular switches. Isomerization can be controlled through complexation with selected metal ions which bind with different affinity. N′‐[1‐(2‐hydroxyphenyl)ethyliden]iso‐nicotinoylhydrazide (HAPI) is an example of a dual‐wavelenght photoswitching molecule, whose complexation with metal ions was recently experimentally investigated (Franks et al. J. Inorg. Chem. 2014, 53, 1397). In this contribution, complexes between HAPI and K⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Cu⁺, Cu²⁺, and Zn²⁺ ions were investigated using Density Functional Theory, Natural Bond Order analysis, and Quantum Theory of Atoms in Molecules. The most important parameters that determine complex stability are found to be ion radius and charge transferred from ligands to the ion: smaller ion radii and larger CT values characterize formation of more stable complexes. Our results explain experimentally observed effect of different metal ions on photoisomerization through determination of metal ion affinity (MIA): photoisomerization is inhibited if MIA exceeds 100 kcal/mol; for MIA between 50 and 100 kcal/mol excess of metal ions prevents isomerization, whereas in case of MIA below 50 kcal/mol metal ions have no influence on light–HAPI interaction. © 2015 Wiley Periodicals, Inc.     

Evaluation of soybean seed protein extraction focusing on metalloprotein analysis

Two methods of protein extraction for soybean seeds were evaluated in terms of preservation of the metal ions bound to proteins after the extraction and separation procedures. The proteins were firstly separated according to their molar masses by polyacrylamide gel electrophoresis. Then, the protein bands were mapped by synchrotron radiation X-ray fluorescence in order to establish which metal ions were present in each one. Finally, some mapped protein bands were decomposed by microwave-assisted combustion and Ca, Cu, K, Mg, Mn, and Zn were quantified by inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry. The extraction methods studied were Method A (based on the treatment of ground soybean seeds with hexane and their extraction with Tris–HCl and β-mercaptoethanol) and Method B (based on the treatment of ground soybean seeds with petroleum ether and their extraction with Tris–HCl, dithiothreitol, phenylmethanesulfonyl fluoride, sodium dodecyl sulfate and potassium chloride). The best method was Method B, in which a 78% higher extraction efficiency was obtained when compared to Method A. Additionally, the metal-protein interactions were more appropriately preserved when Method B was applied, where the most affected ions were those that are bound weakly to proteins, such as Ca, K, and Mg.     

Certification of methylmercury content in two fresh-frozen reference materials: SRM 1947 Lake Michigan fish tissue and SRM 1974b organics in mussel tissue (Mytilus edulis)

This paper describes the development of two independent analytical methods for the extraction and quantification of methylmercury from marine biota. The procedures involve microwave extraction, followed by derivatization and either headspace solid-phase microextraction (SPME) with a polydimethylsiloxane (PDMS)-coated silica fiber or back-extraction into iso-octane. The identification and quantification of the extracted compounds is carried out by capillary gas chromatography/mass spectrometric (GC/MS) and inductively coupled plasma mass spectrometric (GC/ICP-MS) detection. Both methods were validated for the determination of methylmercury (MeHg) concentrations in a variety of biological standard reference materials (SRMs) including fresh-frozen tissue homogenates of SRM 1946 Lake Superior fish tissue and SRM 1974a organics in mussel tissue (Mytilus edulis) and then applied to the certification effort of SRM 1947 Lake Michigan fish tissue and SRM 1974b organics in mussel tissue (Mytilus edulis). While past certifications of methylmercury in tissue SRMs have been based on two independent methods from the National Institute of Standards and Technology (NIST) and participating laboratories, the methods described within provide improved protocols and will allow future certification efforts to be based on at least two independent analytical methods within NIST.     

Sample preparation for metalloprotein analysis: A case study using horse chestnuts

In the present work, 11 different procedures for protein and metalloprotein extraction from horse chestnuts (Aescullus hippocastanum L.) in natura were tested. After each extraction, total protein was determined and, after protein separation through sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), those metals belonging to the protein structure were mapped by synchrotron radiation X-ray fluorescence (SRXRF). After mapping the elements (Cr, Fe and Mn) in the protein bands (ca. 33 and 23.7 kDa), their concentrations were determined using atomic absorption spectrometry (ET AAS).

Good results were obtained for protein extraction using a combination of grinding and sonication. However, this strategy was not suitable to preserve metal ions in the protein structure. In fact, there was 42% decrease on Mn concentration using this procedure, compared to that performed with sample agitation in water (taken as reference). On the other hand, when grinding and agitation with an extracting buffer was used, there was a 530% increase of Mn concentration, when compared to the reference procedure.

These results indicate agreement between metal identification and determination in proteins as well as the great influence of the extraction procedure (i.e., the sample preparation step) for preserving metals in the protein structures.     

Solution equilibria between aluminum(III) ion and some fluoroquinolone family members. Spectroscopic and potentiometric study

Complex formation between aluminum(III) ion and fluoroquinolone antibacterials-either moxifloxacin (4th generation antibiotic) or fleroxacin (2nd generation antibiotic) were studied in aqueous solutions without and in the presence of sodium dodecylsulfate (SDS). The investigations were performed by glass electrode potentiometric (ionic medium: 0.1 mol/dm(3) LiCl, 298 K), UV spectrophotometric, multinuclear (1H and 13C) magnetic resonance and ESI-MS measurements. The experimental data were consistent with the formation of Al(HL)L2+, Al(HL)3+ AlL2+, Al(OH)L+ and Al(OH)2L complexes in the pH interval ca. 3-8 and up to 5 : 1 ligand to metal mole ratio with range of Al3+ concentrations between ca. 0.025 to 1.0 mmol/dm3. The binary complex, AlL2+ is fairly stable (log beta(1,0,1) ca. 11.0) and its stability increases in the presence of SDS. At higher concentration ratios of ligands to aluminum, up to 5 : 1, the complex Al(HL)L2+ is formed with rather high overall stability constant (log beta(1,1,2) ca. 24.0). The ESI-MS data generally, confirmed the derived model, and the formation of the complex with ligand to metal ratio 2 : 1. NMR measurements indicate that both ligands utilize 4-carbonyl and carboxyl oxygens as donor atoms. The presence of surface active substance, SDS, favors the formation of the complex in which the ligand is protonated, i.e. Al(HL) and its maximum formation is shifted toward milder acidic region (pH ca. 4). The aluminum-quinolone complexes may affect the bio-distribution of both, quinolone and/or aluminum ion upon concomitant ingestion of aluminum-based antacids or phosphate binders and fluoroquinolones.     

An ab initio study of the vibronic, spin-orbit, and magnetic hyperfine structure in the X2Pi electronic state of NCO

In the present study we give the results of the ab initio calculations on the vibronic, spin-orbit, and magnetic hyperfine structure in the X (2)Pi electronic state of the NCO radical. The calculations of the potential surfaces and the electronic mean values of the hyperfine coupling constants are carried out by means of the density functional theory approach (B3LYP functional combined with an atomic orbital basis set suitable for calculations of the hyperfine structure). The vibronic levels, spin-orbit splitting, and the vibronic mean values of the components of the hyperfine tensor in the vibronic species are calculated using a variational method. The results of the calculations are in good agreement with the available experimental data.