Contribution of Na counterions to H-AOT&Na-AOT-based W/O microemulsion formation using aqueous NaOH solutions as estimated by pyranine absorbance

The objective of this study is to estimate the contribution of Na⁺ as a counterion in the formation of H-AOT&Na-AOT-based W/O microemulsions using aqueous NaOH solution by pyranine absorbance measurements. A mixture of an aqueous NaOH solution containing pyranine/H-AOT&Na-AOT/isooctane was emulsified by changing the mixing ratio of Na-AOT (X_Na-AOT = 0–1) and the mole fraction of NaOH (X_NaOH = [NaOH]/the AOT⁻ concentration in the water pool = 0–1). The phase behavior of the emulsified mixture was evaluated from the absorbance of pyranine at the isosbestic point and by visual observations. W/O microelumsions are formed at the mid-range of X_Na-AOT, whereas the emulsified mixture separates into two phases at lower X_Na-AOT and higher X_Na-AOT. The two phase boundaries shift toward lower X_Na-AOT as with increasing X_NaOH. The phase behavior depends on the degree of screening of electrostatic repulsions between the polar headgroups of AOT⁻ by the Na⁺ counterion. Interestingly, nano-sized W/O microemulsions are formed without phase separation using a highly concentrated NaOH aqueous solution when the Na-AOT mixing ratio is appropriately adjusted. The phase behavior was plotted as X_NaOH versus X_Na-AOT, and the correlation equations for the two phase boundaries were obtained by fitting the points. The contribution of the Na⁺ counterion from NaOH to W/O microemulsion formation was estimated by the correlation equations. The absorbance of pyranine and the size of W/O microemulsions, as measured by DLS, were plotted as a function of X_Na⁺=(x[Na⁺   from   NaOH]+[Na⁺   from   Na-AOT])/[AOT⁻], in which x is the ratio contributed by NaOH. The absorbance and size correlates well with X_Na⁺, indicating that X_Na⁺ is a meaningful parameter for quantitatively estimating phase behavior and size variation.     

Simultaneous light emission from a mixture of dendrimer encapsulated chromophores: a model for single-layer multichromophoric organic light-emitting diodes

The site isolation of two dyes capable of electronic interaction via Forster energy transfer has been studied with the two dyes coumarin 343 and pentathiophene encapsulated by dendrons containing both solubilizing and electroactive moieties. Photoluminescence studies of mixtures of the dendritic dyes show that at high dendron generation, significant site isolation is achieved with relative emission characteristics influenced by both the degree of site isolation and the emission quantum yield of the dyes. Electroluminescence studies carried out in organic light emitting diode devices confirm that color tuning may be achieved by mixing the two encapsulated dyes in a single layer. However, selective carrier trapping by one of the core component dyes can dramatically influence the effectiveness of other components in the device.     

Application of high-surface-area ZrO2 in preconcentration and determination of 18 elements by on-line flow injection with inductively coupled plasma atomic emission spectrometry

A flow-injection analysis (FIA) system incorporating a micro-column of ZrO2 has been used for the development of an on-line multi-element method for the simultaneous preconcentration and determination of Al, Bi, Cd, Co, Cr, Cu, Fe, Ga, In, Mn, Mo, Ni, Pb, Tl, V, Sb, Sn, and Zn by inductively coupled plasma atomic emission spectrometry (ICP-AES). The conditions for quantitative and reproducible preconcentration, elution, and subsequent on-line ICP-AES determination were established. A sample (pH 8) is pumped through the column at 3 mL min(-1) and sequentially eluted directly into the ICP-AES with 3 mol L(-1) HNO3. With a sample volume of 100 mL and an elution volume of 1 mL signal enhancement 100 times better than for conventional continuous aspirating systems was obtained for the elements studied. The reproducibility (RSD %) of the method at the 10 ng mL(-1) level in the eluate is acceptable - less than 8% for five replicates. Recoveries between 95.4% and 99.9% were obtained for the elements analysed. ZrO2, with a specific surface area of 57 m2 g(-1) and a capacity of approximately 5 mg g(-1) for the elements studied, was synthesized by hydrolysis of ZrCl4. The preconcentration system was evaluated for several simple synthetic matrices, standard water samples and synthetic seawater. The effect of foreign ions on the efficiency of preconcentration of the elements studied was investigated. The application of a micro-column filled with high-surface-area ZrO2 and flow injection inductively coupled plasma atomic emission spectrometry enables preconcentration and simultaneous determination of 18 elements at low concentrations (ng L(-1)) in different water samples.     

Product analyses and crosslink mechanism of plasma-polymerized methyl methacrylate

Plasma-polymerized methyl methacrylate (PPMMA) film was produced by a radio-frequency glow discharge of methyl methacrylate (MMA) gas with argon. PPMMA deposited under a plasma of mild energy was separated into a soluble fraction (sol-PPMMA) and an insoluble matrix (insol-PPMMA), which is highly crosslinked, by solvent-extraction and filtration. The chemical structure of the sol-PPMMA was determined by pyrolysis/gas chromatography, IR spectroscopy, ¹H-NMR, ¹³C-NMR, and elemental analysis techniques. On the other hand, the structure of the insol-PPMMA was examined with IR spectroscopy, ¹³C-NMR with CP/MAS method, and elemental analysis. The crosslinking mechanism in the plasma polymerization of MMA is discussed on the basis of product analyses of the sol-PPMMA and the insol-PPMMA.     

Heterogeneous continuous flow synthetic system using cyclohexane-based multiphase electrolyte solutions

The discovery that supporting electrolytes can be effectively confined in typical organic solvents in a c-Hex-based multiphase electrolyte solution has led to the development of a novel heterogeneous continuous flow synthetic system. PTFE fiber functions as a separation filter that can efficiently isolate the c-Hex phase from multiphase electrolyte solutions. This system has demonstrated both electrochemical solvating and carbon-carbon bond forming reactions. Hydrophobic substrates can be introduced into the reactor as c-Hex solutions, which are then electrochemically transformed into the target hydrophobic products that pass through the PTFE fiber as c-Hex solutions.     

Ruthenocene‐Type Complexes of N‐Fused Porphyrins

Ruthenocene‐type hybrid complexes with N‐fused porphyrinato ligands, [Ru(NFp)Cp] (NFp=N‐fused porphyrin, Cp=cyclopentadienyl), have been prepared and characterized by NMR and UV/Vis/NIR spectroscopy, cyclovoltammetry, and X‐ray crystallography. [Ru(NFp)Cp] is a common low‐spin ruthenium(II) complex and shows strong aromaticity. The Ru–Cp distance (1.833 Å) in [Ru(NFp)Cp] is comparable to that in [RuCp₂] (1.840 Å). DFT calculations on [Ru(NFp)Cp] showed the unequivocal contribution of the RuCp moiety as well as the NFp moiety to both the HOMO and LUMO, constructing a three‐dimensional d–π conjugated system. The HOMO–LUMO gaps of [Ru(NFp)Cp] are insensitive to the substituents on the NFp ligand, which is illustrated spectroscopically as well as theoretically. This is in sharp contrast to the ligand precursor, the N‐fused porphyrin, in which the HOMO–LUMO gap is affected by substituents in a similar manner to standard porphyrins and related macrocycles.     

Laser photolysis studies of the photochemical reactions of chromium(III) octaethylporphyrin and tetramesitylporphyrin complexes in toluene solution

A nanosecond laser photolysis study was carried out for the Cr(III) porphyrin complexes of 2,3,7,8,12,13,17,18-octaethylporphyrin, [Cr(OEP)(Cl)(L)], and of 5,10,15,20-tetramesitylporphyrin, [Cr(TMP)(Cl)(L)], in toluene containing water and an excess amount of L (L = axial ligand). The laser photolysis generates the triplet excited state of the parent complex as well as a five-coordinate complex, [Cr(porphyrin)(Cl)], produced by the photodissociation of the axial ligand L. The yields for the formation of the triplet state and the photodissociation of L are found to markedly depend on the nature of both L and porphyrin ligand. The five-coordinate [Cr(porphyrin)(Cl)] readily reacts with both H(2)O and L in the bulk solution to give [Cr(porphyrin)(Cl)(H(2)O)] and [Cr(porphyrin)(Cl)(L)], respectively. The axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] is then substituted by the ligand L to regenerate the original complex [Cr(porphyrin)(Cl)(L)]. In principle, the substitution reaction takes place by the dissociative mechanism: the first step is the dissociation of H(2)O from [Cr(porphyrin)(Cl)(H(2)O)], followed by the reaction of the five-coordinate [Cr(porphyrin)(Cl)] with the ligand L to regenerate [Cr(porphyrin)(Cl)(L)]. The rate constants for this ligand substitution reaction are found to exhibit bell-shaped ligand concentration dependence. The detailed kinetic analysis revealed that both ligands L and H(2)O in toluene make a hydrogen bond with the axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] to yield dead-end complexes for the substitution reaction. The reaction mechanisms are discussed on the basis of the substituent effects of the porphyrin peripheral groups and the kinetic parameters determined from the temperature dependence of the rate constants.